The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides hardware specifications for the WAVE-294 appliance. It contains the following sections:
•Interface Module Specifications
Table A-1 provides a summary of the features and specifications of the WAVE-294.
|
|
---|---|
Microprocessor |
•1 Intel Pentium Dual-Core Processor G6950 •2.8 GHz •3 MB cache |
Memory |
•4 GB (optionally 8 GB) ECC DDR3 SDRAM (UDIMM) 1066 MT/s |
Mass storage |
•1 250-GB SATA hard disk drive |
Expansion slots |
•1 Interface Module Slot for Cisco Interface Modules |
Dimensions |
•Height: 42 mm (1.69 in.) •Depth: 370 mm (14.55 in.) •Width: 429 mm (16.89 in.) |
Weight |
Maximum Weight (no carton): 7.44 kg (16.40 lb) |
Electrical Input Requirements1 |
•Range Line Voltage: 90 to 132 VAC, 180 to 264 VAC •Maximum Rated Input Current: 4.85 A (100 VAC) •Rated Input Frequency: 47 to 63 Hz •Maximum Real Input Power: 460 W total |
BTU Rating |
1570 BTU/hr Maximum |
Power supply output |
•Rated steady-state power: 400 W (across input of 100 - 240 VAC) •Efficiency: Minimum of 87% at 100% electrical load |
Acoustic noise2 |
•Idle: 37.2 dBA •Operating (70% load): 37.9 dBA |
Environment |
•Air temperature: –Operating3 : 0 to 40 °C (32 to 104 °F) –Non-operating: -30 to 60 °C (-22 to 140 °F) •Humidity: –Operating: 10% to 90% RH (non-condensing) –Nonoperating: 5% to 95% RH (non-condensing) •Altitude: –Operating: 3,050 m (10,000 ft) –Nonoperating: 4572 m (15,000 ft) |
1 Electrical input specifications apply at 23 ºC (73.4 ºF). 2 Levels are A-weighted sound pressures measured in a 23 ºC (73.4 ºF) ambient environment. Measurements were made per ISO 7779 (ECMA 74; ANSI S12.10) methods and are declared per ISO 9296 (ECMA 109). 3 All temperature ratings shown are for sea level to 3,050 meters (10, 000 ft). |
Table A-2 describes the Interface Module technical and general specifications.