PDF(168.6 KB) View with Adobe Reader on a variety of devices
Updated:January 3, 2014
Document ID:1457307069955225
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Transform Your Cisco SPA IP Phone into a Wireless Phone
Highlights
• Extend phone communication anywhere
• 802.11n wireless for superior coverage and quality of service (QoS)
• Uses your existing wireless network
• Easy installation and setup
A Complete Wireless Desktop Phone Experience
The Cisco
® Wireless-N Bridge for Phone Adapters, often called the Cisco SPA Bridge, lets you transform your Cisco SPA IP Phone into a flexible wireless device. Designed specifically for small businesses, it gives you the freedom to place your IP phone most anywhere in the office, without the need for a nearby wired network connection. The bridge supports standards-based 802.11n wireless networking, providing better coverage and superior bandwidth. Advanced (QoS) features help ensure crystal-clear voice communication.
With the Cisco SPA Bridge, you can easily add new extensions or move phones between offices, conference rooms, lobbies, or other environments - without expensive network wiring. The solution lets you extend your phone system using your existing wireless network, while providing the mobility, flexibility, and agility you need to meet changing needs in a dynamic environment.
Fast, Simple Installation
The Cisco SPA Bridge fits conveniently inside the base of the Cisco SPA 300 or SPA 500 Series IP Phone, minimizing desktop clutter and additional wires. Simply plug the device's Ethernet cable and power adapter into the phone and use the embedded setup wizard for fast, easy configuration. A single AC adapter powers both the phone and the installed bridge.
Features and Benefits
• Wireless connectivity eases installation of phone system without additional, costly wiring
• Robust Wireless-N support extends network connectivity to hard-to-reach spots
• Wizard-based setup speeds installation
Table 1. Specifications
Description
Specification
Standards
Ports
Power in, Power Out and Ethernet Out
Ethernet
10/100 Mbps, RJ-45, MDI/X
Buttons
Reset, Wi-Fi Protected Setup (WPS)
Cabling type
Unshielded twisted pair (UTP) Category 5
LEDs
System, Wi-Fi Protected Setup, Wireless
Setup/Configuration
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP)
Management
Web browser
Internet Explorer 7 and 8, Netscape, Firefox
Event logging
Event logging (embedded syslog)
Web firmware upgrade
Firmware upgradable through web browser
WiFi
Modulation
802.11b: CCK/QPSK, BPSK
802.11g: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
802.11n: OFDM/BPSK, QPSK, 16-QAM, 64-QAM
RF Power (EIRP) in dbm
802.11b: 17dbm (typical) @ 11Mbps
802.11g: 15dbm (typical) @ 54Mbps
802.11n: 13dbm (typical) @ 130Mbps
Receive Sensitivity in dbm
802.11b: -85dBm @11Mbps
802.11g: -74dBm @54Mbps
802.11n: -72dBm @MCS7/2.4Ghz
Wireless Security
WEP, WPA and WPA2 (Personal Only)
Certification
FCC Part 15C Class B, CE, VCCI, C-Tick, LVD
Power
Power supply
External power adapter: 12V DC/1A
External power adapter: 12V DC/3A or 5VDC/2A
Purchase of a PA100-NA (North America Plug), PA100-EU (European Plug), PA100-UK (UK Plug), or
PA100-AU (Australia Plug) will be required.
Power consumption
3W
Environmental
Dimensions (W x H)
55.88 x 22.50 mm / 2.20 x 0.89 in.
Unit weight
0.07 kg / 0.15 lb
Certification
FCC Part 15C Class B, CE, VCCI, C-Tick, LVD
Operating temperature
32º to 113ºF (0º to 40ºC)
Storage temperature
-77º to 158ºF (-20º to 60ºC)
Operating humidity
10% to 90%
Storage humidity
5% to 90%
Package Contents
Cisco Wireless-N Bridge for Phone Adapters
Quick Installation Guide
CD with user documentation
Table 2. Ordering Information
Ordering Product Number
UPC/EAN
WBPN
882658461842 / 0882658461842
Service and Support
The Cisco Small Business Support Service provides three years of affordable peace-of- mind coverage, to help you protect your investment and derive maximum value from your Cisco Small Business solution. The subscription-based service offers software updates, access to the Cisco Small Business Support Center, online chat support, and expedited hardware replacement.
Warranty
The Cisco Wireless Bridge-N for Phone Adapters is covered by a Cisco 1-year limited hardware warranty with return-to-factory replacement and a 90-day limited software warranty. In addition, Cisco offers software updates for bug fixes for the warranty term, and telephone technical support at no charge for the first 12 months following the date of purchase.
Product warranty terms and other information applicable to Cisco products are available at
www.cisco.com/go/warranty.
Feedback