show ip eigrp topology

To display the Enhanced Interior Gateway Routing Protocol (EIGRP) topology table, use the show ip eigrp topology command.

show ip eigrp [instance-tag] topology [ip-address/length] [active | all-links | detail-links | pending | summary | zero-successors] [vrf {vrf-name| all | default | management}]

Syntax Description

instance-tag

(Optional) Name of the EIGRP instance. The instance tag can be any case-sensitive, alphanumeric string up to 20 characters.

ip-address/length

(Optional) IP address in four-part, dotted-decimal notation with a network mask indicated as a slash (/) and number. For example, /8 indicates that the first 8 bits of the mask are 1s, and the corresponding bits of the address are the network address.

active

(Optional) Displays only active entries in the EIGRP topology table.

all-links

(Optional) Displays all entries in the EIGRP topology table.

detail-links

(Optional) Displays detailed information for all entries in the EIGRP topology table.

pending

(Optional) Displays all entries in the EIGRP topology table that are waiting for an update from a neighbor or are waiting to reply to a neighbor.

summary

(Optional) Displays a summary of the EIGRP topology table.

zero-successors

(Optional) Displays available routes in the EIGRP topology table.

vrf vrf-name

(Optional) Specifies the name of the virtual routing and forwarding (VRF) instance. The vrf-name argument can be specified as any case-sensitive, alphanumeric string up to 32 characters.

all

(Optional) Specifies all VRF instances.

default

(Optional) Specifies the default VRF.

management

(Optional) Specifies the management VRF.


Command Default

This command displays information for the default VRF if no VRF is specified.

Command Modes

Any command mode

Command History

Release
Modification

5.0(3)N1(1)

This command was introduced.


Usage Guidelines

Use the show ip eigrp topology command to determine Diffusing Update Algorithm (DUAL) states and to debug possible DUAL problems.

When you use the show ip eigrp topology command without any keywords or arguments, Cisco NX-OS displays only routes that are feasible successors.

This command requires the LAN Base Services license.

Examples

This example shows how to display the EIGRP topology table. The EIGRP metrics for specified internal routes and external routes are displayed.

switch# show ip eigrp topology 192.0.2.0/24
IP-EIGRP (AS 65535): Topology entry for 192.0.2.0/24
  State is Passive, Query origin flag is 1, 7 Successor(s), FD is 13056
  Routing Descriptor Blocks:
  192.0.2.1 (Ethernet2/7), from 192.0.2.1, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 0
        Administrator tag is 0 (0x00000000)
  192.0.2.2 (Ethernet2/6), from 192.0.2.2, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.3 (Ethernet3/12), from 192.0.2.3, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.6 (Ethernet3/11), from 192.0.2.6, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.4 (port-channel2000), from 192.0.2.4, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.2 (Ethernet2/6), from 192.0.2.2, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.7 (Ethernet2/5), from 192.0.2.7, Send flag is 0x0
      Composite metric is (13056/12800), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 310 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 1
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
  192.0.2.200 (port-channel2001), from 192.0.2.200, Send flag is 0x0
      Composite metric is (13312/13056), Route is External
      Vector metric:
        Minimum bandwidth is 500000 Kbit
        Total delay is 320 microseconds
        Reliability is 200/255
        Load is 1/255
        Minimum MTU is 1500
        Hop count is 2
      External data:
        Originating router is 1.1.1.1
        AS number of route is 0
        External protocol is OSPF, external metric is 40
        Administrator tag is 0 (0x00000000)
switch#

This example show how to display all the entries in the EIGRP topology table:

switch(config)# show ip eigrp topology all-links 

This example shows how to display the detailed information for all entries in the EIGRP topology table:

switch(config)# show ip eigrp topology detail-links 

This example shows how to display a summary of the topology table:

switch(config)# show ip eigrp topology summary 
IP-EIGRP Topology Table for AS(65535)/ID(3.1.1.1) VRF default

Head serial 3, next serial 15631
3536 routes, 0 pending replies, 0 dummies
IP-EIGRP(0) enabled on 8 interfaces, 8 neighbors present on 8 interfaces
Quiescent interfaces:  Eth3/11 Po2000 Po2001 Eth2/7 Eth2/5 Eth2/6 Eth1/26 Eth3/12
switch#

This example shows how to display the active entries in the topology table:

switch(config-if)# show ip eigrp topology active

This example shows how to display zero-successors in the topology table:

switch(config-router)# show ip eigrp topology zero-successors

This example shows how to display pending entries:

switch(config)# show ip eigrp topology pending

Related Commands

Command
Description

show running-config eigrp

Displays EIGRP running configuration information.