IP SLA のコマンドについては、『Cisco IOS IP SLA Command Reference, Release 12.4T』のコマンド リファレンスを参照してください。
説明と設定手順の詳細については、『Cisco IOS IP SLAs Configuration Guide, Release 12.4TL』を参照してください。
ガイドに記載されている IP SLA コマンドまたは動作の中にはデバイスでサポートされないものもあります。デバイスでは、UDP ジッター、UDP エコー、HTTP、TCP 接続、ICMP エコー、ICMP パス エコー、ICMP パス ジッター、FTP、DNS、DHCP を使用する IP サービス レベル分析がサポートされます。また、複数動作スケジューリングおよび事前に設定されたしきい値のモニタリングもサポートされます。ゲートキーパー登録遅延動作測定を使用した
Voice over IP(VoIP)サービス レベルはサポートしていません。
IP SLA アプリケーションを設定する前に、show ip sla application 特権 EXEC コマンドを使用してソフトウェア イメージで動作タイプがサポートされていることを確認してください。コマンド出力例は次のとおりです。
Device# show ip sla application
IP Service Level Agreements
Version: Round Trip Time MIB 2.2.0, Infrastructure Engine-III
Supported Operation Types:
icmpEcho, path-echo, path-jitter, udpEcho, tcpConnect, http
dns, udpJitter, dhcp, ftp, udpApp, wspApp
Supported Features:
IPSLAs Event Publisher
IP SLAs low memory water mark: 33299323
Estimated system max number of entries: 24389
Estimated number of configurable operations: 24389
Number of Entries configured : 0
Number of active Entries : 0
Number of pending Entries : 0
Number of inactive Entries : 0
Time of last change in whole IP SLAs: *13:04:37.668 UTC Wed Dec 19 2012