Explains VIC 1455 support on the IEC6400 gateway, including VIC status verification and vNIC configuration through the Cisco IMC GUI and CLI.
Virtual interface cards
Describes the Cisco UCS Virtual Interface Card (VIC) 1455 and its virtual network interface card components.
VIC status verification using gateway CLI
Provides the command and output details for verifying VIC status in the gateway using the CLI.
Configure the vnic using the CIMC GUI
This topic explains how to configure the vNIC properties using the CIMC GUI interface when the VIC is installed after product delivery or when the URWB software does not recognize the card.
Configure the vNIC using the CIMC CLI
This topic explains how to configure vNIC properties for eth1, eth2, and eth3 interfaces using the CIMC CLI when the VIC is installed after product delivery or when the URWB software does not recognize the card.