Describes recommended deployment and VLAN settings that support interoperability between the IEC6400 gateway and Catalyst APs operating in URWB mode.
Restrictions on deploying IEC6400 as coordinator (mesh end)
Outlines deployment requirements and restrictions when using the IEC6400 as Coordinator or Mesh end node.
VLAN configuration for Catalyst APs in URWB mode
Explains how to configure VLANs so that Catalyst APs in URWB mode can communicate with the IEC6400 controller.
Configure untagged VLAN setup
Configure untagged VLAN setup when Catalyst APs in URWB mode do not use CAPWAP VLAN tags.
Configure tagged VLAN setup
Configure tagged VLAN functionality to enable communication between Catalyst APs in URWB mode and the IEC6400 using a specific CAPWAP VLAN tag.
Add a VLAN for wired clients
Configure switch port settings to support wired clients on a separate VLAN by updating port configurations to allow the new VLAN.