Explains Smart Licensing support for IEC6400 and Catalyst IW916x devices, including license levels, seat management, configuration, and verification through the GUI and CLI.
Overview of Smart Licensing Support
Describes the smart licensing framework for gateways operating in URWB mode. This system manages feature access, throughput levels, and license synchronization through direct or manual connectivity methods.
Configure and Validate Smart Licensing using CLI
Configures and validates smart licensing for the IEC6400 gateway and Catalyst IW916x devices using CLI commands.
Configure Smart Licensing using GUI
Configures the network license level for the URWB network using the web-based graphical user interface. This procedure ensures that the appropriate license seats are assigned to the platform.
Configure Smart License Seats Management
Configures the number of smart license seats for the platform using the command line interface. This process ensures the device is correctly licensed for the specified network hardware.
Configure Running License Level using CLI
Configures the license level for Catalyst IW916x devices and IEC devices using the command line interface. This process ensures the appropriate network license is applied to gateways and radios within the network.
Verify License Smart License Seat using CLI
Verifies the configured smart license seat status on the device using the command line interface. This procedure ensures that the platform configuration matches the current license seat allocation.
Configure Running License Level for Gateway
Configures the license level for the gateway using the command line interface. This setting determines the network feature set available for the device.