New and Changed Information

New and Changed Information for Firmware Release 14.3(1)SR3

The following information is new or changed for Firmware Release 14.3(1)SR3.


Feature	New or Changed
Added the new security setting "Backward compatibility with WPA"	Supported Security Features
Added the new parameter "TLS Client Min Version". Updated the default value of the parameter "Disable TLS 1.0 and TLS 1.1 for Web Access" from "Disabled" to "Enabled".	Product Specific Configuration

The following information is new or changed for Firmware Release 14.3(1).


Feature	New or Changed
Cisco Headset USB-C Adapter Support	Telephone Features
Customize Ringtone Enhancement Conference with Active Call Enhancement	Product Specific Configuration

The following information is new or changed for Firmware Release 14.2(1).


Feature	New or Changed
Support for SIP OAuth on SRST	Security Enhancements for Your Phone Network
Simplified Extension Mobility Login with Cisco Headset 730 USB Adapter	Telephone Features
Bluetooth Mute Sync for Cisco Headset 700 Series	Telephone Features
New settings for Cisco Headset 500 Series: Dock Event and Always On Mode	Telephone Features

The following information is new or changed for Firmware Release 14.1(1).


Feature	New or Changed
SIP OAuth for Proxy TFTP support	Security Enhancements for Your Phone Network
Improved Call Alert for Hunt Group	Telephone Features
Configurable Calling Number Display for Enhanced Line Mode	Product Specific Configuration
Configurable Delayed PLAR	Telephone Features
MRA Support for Extension Mobility Login with Cisco Headsets	Telephone Features
Phone Migration without Transition Load	Migration of your Phone to a Multiplatform Phone Directly

Table 1. New and Changed Information
Feature	New or Changed
Call Park Monitoring Enhancement	Product Specific Configuration
SIP OAuth Enhancements	Security Enhancements for Your Phone Network
User Interface Enhancements	Survivable Remote Site Telephony Telephone Features
OAuth Enhancements for MRA	Mobile and Remote Access Through Expressway

As of Firmware Release 14.0, the phones support DTLS 1.2. DTLS 1.2 requires Cisco Adaptive Security Appliance (ASA) Release 9.10 or later. You configure the minimum DTLS version for a VPN connection in ASA. For more information, see ASDM Book 3: Cisco ASA Series VPN ASDM Configuration Guide at https://www.cisco.com/c/en/us/support/security/asa-5500-series-next-generation-firewalls/products-installation-and-configuration-guides-list.html

The following information is new or changed for Firmware Release 12.8(1).


Feature	New or Changed Content
Phone Data Migration	Change a User's Phone Model
Headset Update Enhancement	Device Information
Simplify Extension Mobility Login with Cisco Headsets	Telephone Features
Feature Control Changes	Product Specific Configuration, new fields Lower Your Voice Alert and Mark Call As Spam
General changes	Clarify Wi-Fi and the PC Port: Set Up Phone from Setup Menus Enable the Wireless LAN on the Phone
Add additional information about the Web Access field	Product Specific Configuration
Remove unsupported feature	Telephone Features