Contents

Viewing Server Sensors

This chapter includes the following sections:

Viewing Temperature Sensors

Procedure
    Step 1   In the Navigation pane, click the Server tab.
    Step 2   On the Server tab, click Sensors.
    Step 3   In the Sensors pane, click the Temperature tab.
    Step 4   View the following temperature-related statistics for the server:
    Tip   

    Click a column header to sort the table rows according to the entries in that column.

    Name Description

    Sensor Name column

    The name of the sensor. This can be one of the following:

    • TEMP_AMB_X— Ambient temperature, obtained from sensors located inside the module.

    • P1_TEMP_SENS—Processor core temperature.

    • DDR3_P1_X0_TMP—Memory module temperature.

    Status column

    The status of the sensor. This can be one of the following:

    • Unknown

    • Informational

    • Normal

    • Warning

    • Critical

    • Non-Recoverable

    Temperature column

    The current temperature, in Celsius.

    Warning Threshold Min column

    The minimum warning threshold.

    Warning Threshold Max column

    The maximum warning threshold.

    Critical Threshold Min column

    The minimum critical threshold.

    Critical Threshold Max column

    The maximum critical threshold.

    Viewing Voltage Sensors

    Procedure
      Step 1   In the Navigation pane, click the Server tab.
      Step 2   On the Server tab, click Sensors.
      Step 3   In the Sensors pane, click the Voltage tab.
      Step 4   View the following voltage-related statistics for the server:
      Tip   

      Click a column header to sort the table rows according to the entries in that column.

      Name Description

      Sensor Name column

      The name of the sensor.

      Status column

      The status of the sensor. This can be one of the following:

      • Unknown

      • Informational

      • Normal

      • Warning

      • Critical

      • Non-Recoverable

      Voltage column

      The current voltage, in volts.

      Warning Threshold Min column

      The minimum warning threshold.

      Warning Threshold Max column

      The maximum warning threshold.

      Critical Threshold Min column

      The minimum critical threshold.

      Critical Threshold Max column

      The maximum critical threshold.

      Viewing LED Sensors

      Procedure
        Step 1   In the Navigation pane, click the Server tab.
        Step 2   On the Server tab, click Sensors.
        Step 3   In the Sensors pane, click the LEDs tab.
        Step 4   View the following LED-related statistics for the server:
        Name Description

        Sensor Name column

        The name of the sensor. This can be one of the following:

        • LED_HLTH_STATUS—Status sensor (not a physical LED), shows the overall health of the system.

        • LED_DIMM_STATUS—Status sensor (not a physical LED), shows the health of the DIMM.

        • LED_CPU_STATUS—Status sensor (not a physical LED), shows the health of the CPU.

        • LED_SYS_ACT—System activity, indicates if the system is powered on and has finished booting.
          Note   

          Not displayed for the NIM E-Series NCE.

        LED State column

        Whether the LED is on, blinking, or off.

        LED Color column

        The current color of the LED.

        For details about what the colors mean, see the hardware installation guide for the type of server you are using.

        Viewing Storage Sensors

        Procedure
          Step 1   In the Navigation pane, click the Server tab.
          Step 2   On the Server tab, click Sensors.
          Step 3   In the Sensors pane, click the Storage tab.
          Step 4   View the following storage-related statistics for the server:
          Name Description

          Name column

          The name of the storage device. This can be:

          HDDX_PRS—Indicates the presence or absence of each hard drive.

          Status column

          A brief description of the status of the storage device.

          LED Status column

          The current LED color, if any.

          To make the physical LED on the storage device blink, select Turn On from the drop-down list. To let the storage device control whether the LED blinks, select Turn Off.
          Viewing Server Sensors

          Viewing Server Sensors

          This chapter includes the following sections:

          Viewing Temperature Sensors

          Procedure
            Step 1   In the Navigation pane, click the Server tab.
            Step 2   On the Server tab, click Sensors.
            Step 3   In the Sensors pane, click the Temperature tab.
            Step 4   View the following temperature-related statistics for the server:
            Tip   

            Click a column header to sort the table rows according to the entries in that column.

            Name Description

            Sensor Name column

            The name of the sensor. This can be one of the following:

            • TEMP_AMB_X— Ambient temperature, obtained from sensors located inside the module.

            • P1_TEMP_SENS—Processor core temperature.

            • DDR3_P1_X0_TMP—Memory module temperature.

            Status column

            The status of the sensor. This can be one of the following:

            • Unknown

            • Informational

            • Normal

            • Warning

            • Critical

            • Non-Recoverable

            Temperature column

            The current temperature, in Celsius.

            Warning Threshold Min column

            The minimum warning threshold.

            Warning Threshold Max column

            The maximum warning threshold.

            Critical Threshold Min column

            The minimum critical threshold.

            Critical Threshold Max column

            The maximum critical threshold.

            Viewing Voltage Sensors

            Procedure
              Step 1   In the Navigation pane, click the Server tab.
              Step 2   On the Server tab, click Sensors.
              Step 3   In the Sensors pane, click the Voltage tab.
              Step 4   View the following voltage-related statistics for the server:
              Tip   

              Click a column header to sort the table rows according to the entries in that column.

              Name Description

              Sensor Name column

              The name of the sensor.

              Status column

              The status of the sensor. This can be one of the following:

              • Unknown

              • Informational

              • Normal

              • Warning

              • Critical

              • Non-Recoverable

              Voltage column

              The current voltage, in volts.

              Warning Threshold Min column

              The minimum warning threshold.

              Warning Threshold Max column

              The maximum warning threshold.

              Critical Threshold Min column

              The minimum critical threshold.

              Critical Threshold Max column

              The maximum critical threshold.

              Viewing LED Sensors

              Procedure
                Step 1   In the Navigation pane, click the Server tab.
                Step 2   On the Server tab, click Sensors.
                Step 3   In the Sensors pane, click the LEDs tab.
                Step 4   View the following LED-related statistics for the server:
                Name Description

                Sensor Name column

                The name of the sensor. This can be one of the following:

                • LED_HLTH_STATUS—Status sensor (not a physical LED), shows the overall health of the system.

                • LED_DIMM_STATUS—Status sensor (not a physical LED), shows the health of the DIMM.

                • LED_CPU_STATUS—Status sensor (not a physical LED), shows the health of the CPU.

                • LED_SYS_ACT—System activity, indicates if the system is powered on and has finished booting.
                  Note   

                  Not displayed for the NIM E-Series NCE.

                LED State column

                Whether the LED is on, blinking, or off.

                LED Color column

                The current color of the LED.

                For details about what the colors mean, see the hardware installation guide for the type of server you are using.

                Viewing Storage Sensors

                Procedure
                  Step 1   In the Navigation pane, click the Server tab.
                  Step 2   On the Server tab, click Sensors.
                  Step 3   In the Sensors pane, click the Storage tab.
                  Step 4   View the following storage-related statistics for the server:
                  Name Description

                  Name column

                  The name of the storage device. This can be:

                  HDDX_PRS—Indicates the presence or absence of each hard drive.

                  Status column

                  A brief description of the status of the storage device.

                  LED Status column

                  The current LED color, if any.

                  To make the physical LED on the storage device blink, select Turn On from the drop-down list. To let the storage device control whether the LED blinks, select Turn Off.