Describes how to view and manage trace information across software releases. Helps you stop, delete, and review trace details, filters, sources, applications, status, and statistics in the Trace History and Trace areas.
You can perform the following actions in the Trace History area or Trace area.
Describes how to view and manage trace information, including stopping, deleting, and reviewing trace details, filters, sources, applications, status, and statistics within the Trace History and Trace areas across different software releases.
In releases before Cisco vManage Release 20.6.1
-
To stop an active trace, click Stop. If you have specified the trace duration, the trace stops automatically when the timer expires.
-
To navigate to the Flow Path and Metrics section, click Detail.
From Cisco vManage Release 20.6.1
|
Action |
Procedure |
Tab (from Cisco Catalyst SD-WAN Manager Release 20.12.1) |
|---|---|---|
|
Stop a trace that is in progress. |
Click Stop in the Action column for the trace, and then click Confirm in the Stop Trace dialog box. |
All Trace and Auto-On Task |
|
Delete a trace that is completed. |
Click Delete in the Action column for the trace, and then click Confirm in the Delete Trace dialog box. |
All Trace and Auto-On Task |
|
Display trace-level insight summary information (from Cisco vManage Release 20.9.1). |
See . |
All Trace and Auto-On Task |
|
Display detailed information about the flows in a trace in the Insight area. |
Click Insight Summary for the trace in the Trace Name column. |
All Trace |
|
View the filters and settings for a trace. |
Click the name of the trace in the Trace Name column. |
All Trace |
|
View information about the source of a trace. |
Click the corresponding value in the Src Site column. |
All Trace |
|
View information about the applications or application groups that a trace monitors. |
Click the corresponding value in the Application/App Group column. |
All Trace |
|
View the status of a trace and error messages, if any, that have been generated. |
Click the corresponding value in the Trace State column. |
All Trace |
|
View statistics for a task (from Cisco Catalyst SD-WAN Manager Release 20.12.1). |
Click the name of the corresponding task. |
Auto-On Task |
|
View the filters and settings for a trace in a task (from Cisco Catalyst SD-WAN Manager Release 20.12.1). |
Expand the task that you want, and then click the name of the trace in the Trace Name column. |
Auto-On Task |