Describes detailed graphs and charts for application flows affected during an event. This information helps users analyze flow counts, application paths, and event impacts for root-cause analysis.
The Event Insight tab displays information about application flows affected during each minute of an event.
Event Insight information
You can use the information in the Event Insight tab to assist with a root-cause analysis.
This tab is not available for consolidated insight summaries.
-
Flows graph: Provides information about the number of flows at a particular time.
-
Applications Path & Event Sankey chart: Provides detailed information about the effect of designated events at a particular time. Hover your cursor over a data point to see more information.
The graph displays information for each application that appears in the Application field and the hop that is displayed in the Hop field. From Cisco Catalyst SD-WAN Manager Release 20.12.1 , the Application field appears when you expand Group Fields . The Sankey chart displays information for each application that appears in the Application field, for all the hops regardless of the hop that is displayed in the Hop field, and for the events that are displayed in the Events field.
Using Event Insight controls
The five applications with the most hotspot issues appear in the Application field by default. You can remove an application by clicking X next to its name, and add an application by choosing the application from the Application drop-down list. You can choose a hop from the Hop drop-down list.
Hotspot events that the trace detects appear in the Events field by default. You can remove an event by clicking X next to its name and add an event by choosing the event from the Application drop-down list.
From Cisco Catalyst SD-WAN Manager Release 20.12.1 , information for all the VPNs that the trace detects is selected by default. You can remove a VPN by unchecking it in the corresponding drop-down list, and add a VPN by choosing the item from the corresponding drop-down list.
From Cisco Catalyst SD-WAN Manager Release 20.12.1 , you can use the fields in the Group Fields area to group the information that displays by the selected items. The fields that are displayed depend on the Grouping Fields options that you chose when you started the trace. You can remove a grouping item by clicking X next to its name, and add an item by choosing it from a drop-down list.
Click Upstream to display information for upstream traffic in the graph and chart. Click Downstream to display information for downstream traffic in the graph and chart.
Hover your cursor over a data point to display detailed information about the events that affect the flow at that point. Click a data point to update the Sankey chart for that data point. Hover your cursor over a data point in the Sankey chart to display more detailed information.