Configure SD-WAN Analytics to automatically trigger NWPI traces. This enables cloud-based trace collection and storage for enhanced network-wide path insight and troubleshooting.
Configure SD-WAN Analytics to automatically trigger NWPI traces for network-wide path insight and troubleshooting.
-
Enable cloud-based trace collection and storage for easier analysis.
Use this task when you want SD-WAN Analytics to automatically initiate NWPI traces based on network events or analytics triggers.
NWPI traces are typically named in a [trigger reason] Auto Triage - [timestamp] format, helping identify the reason and time of trace creation.
-
Traces can be stored locally, in the cloud, or both, depending on configuration.
Before you begin
Before configuring SD-WAN Analytics triggered NWPI traces, ensure you have access to Cisco SD-WAN Manager and the necessary permissions to modify settings.
-
Cloud Services must be enabled in Cisco SD-WAN Manager.
-
Analytics must be allowed to create traces and tasks via API.
Follow these steps to configure SD-WAN Analytics triggered NWPI trace:
Procedure
After completing these steps, SD-WAN Analytics will automatically trigger NWPI traces. Traces will be named according to the trigger reason and timestamp, and can be stored locally, in the cloud, or both.
What to do next
Review the trace table to verify the storage location and ensure traces are uploaded as expected.
Confirm that traces are accessible for analysis in SD-WAN Analytics cloud or local storage.