Introduction
You can use the Cisco IOS XE REST API to manage the Cisco CSR 1000v as an alternative to configuring and managing selected features on the router using the Cisco IOS XE CLI. This chapter describes how to configure the Cisco CSR 1000v to enable management using the REST API. For detailed information about using the REST API, see Cisco IOS XE REST API Management Reference Guide.
Note |
REST API is not supported from the IOS-XE 16.7.x release onwards. If you are using the 16.7.x version or above, Cisco recommends that you use Restconf. For more information on using Restconf, see the Restconf documentation. |