Cisco 4000 Series Integrated Services Routers Overview


Note

Explore the Content Hub, the all new portal that offers an enhanced product documentation experience.

  • Use faceted search to locate content that is most relevant to you.

  • Create customized PDFs for ready reference.

  • Benefit from context-based recommendations.

Get started with the Content Hub at content.cisco.com to craft a personalized documentation experience.

Do provide feedback about your experience with the Content Hub.


The Cisco 4000 Series ISRs are modular routers with LAN and WAN connections that can be configured by means of interface modules, including Cisco Enhanced Service Modules (SM-Xs), and Network Interface Modules (NIMs).

The following table lists the router models that belong to the Cisco 4000 Series ISRs.

Cisco 4400 Series ISR

Cisco 4300 Series ISR

Cisco 4200 Series ISR

Cisco 4431 ISR

Cisco 4321 ISR

Cisco 4221 ISR

Cisco 4451 ISR

Cisco 4331 ISR

Cisco 4461 ISR

Cisco 4351 ISR

System Requirements

The following are the minimum system requirements:

  • Memory: 4GB DDR3 up to 16GB

  • Hard Drive: 200GB or higher (Optional). (The hard drive is only required for running services such as Cisco ISR-WAAS.)

  • Flash Storage: 4GB to 32GB

  • NIMs and SM-Xs: Modules (Optional)

  • NIM SSD (Optional)

For more information, see the .

Determining the Software Version

You can use the following commands to verify your software version:

  • For a consolidated package, use the show version command

  • For individual sub-packages, use the show version installed command

Upgrading to a New Software Release

To install or upgrade, obtain a Cisco IOS XE Fuji 16.9.1 consolidated package (image) from Cisco.com. You can find software images at http://software.cisco.com/download/navigator.html. To run the router using individual sub-packages, you also must first download the consolidated package and extract the individual sub-packages from a consolidated package.

For information about upgrading software, see the “How to Install and Upgrade Software” section in the Software Configuration Guide for the Cisco 4000 Series ISRs.

Recommended Firmware Versions

Table 1 provides information about the recommended Rommon and CPLD versions for releases prior to Cisco IOS XE Everest 16.4.1.

Table 1. Recommended Firmware Versions

Cisco 4000 Series ISRs

Existing RoMmon

Cisco Field-Programmable Devices

Cisco 4451 ISR

16.7(4r)

15010638

Note 
Upgrade CLI output has a typo and it would show the version incorrectly as 15010738 instead of 15010638. This does not impact the upgrade.

Cisco 4431 ISR

16.7(4r)

15010638

Note 
Upgrade CLI output has a typo and it would show the version incorrectly as 15010738 instead of 15010638. This does not impact the upgrade.

Cisco 4351 ISR

16.7(3r)

14101324

Cisco 4331 ISR

16.7(3r)

14101324

Cisco 4321 ISR

16.7(3r)

14101324

Cisco 4221 ISR

16.7(3r)

14101324

Upgrading Field-Programmable Hardware Devices

The hardware-programmable firmware is upgraded when Cisco 4000 Series ISR contains an incompatible version of the hardware-programmable firmware. To do this upgrade, a hardware-programmable firmware package is released to customers.

Generally, an upgrade is necessary only when a system message indicates one of the field-programmable devices on the Cisco 4000 Series ISR needs an upgrade, or a Cisco technical support representative suggests an upgrade.

From Cisco IOS XE Release 3.10S onwards, you must upgrade the CPLD firmware to support the incompatible versions of the firmware on the Cisco 4000 Series ISR. For upgrade procedures, see the Upgrading Field-Programmable Hardware Devices for Cisco 4000 Series ISRs .

Feature Navigator

You can use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn . An account on cisco.com is not required.

Limitations and Restrictions

The following limitations and restrictions apply to all releases:

Cisco Unified Threat Defense

The Cisco Unified Threat Defense (UTD) service requires a minimum of 1 to 4 GB of DRAM.

Cisco ISR-WAAS and AppNav-XE Service

The Cisco ISR-WAAS/AppNav service requires a system to be configured with a minimum of 8GB of DRAM and 16GB flash storage. For large service profiles, 16GB of DRAM and 32GB flash storage is required. Also, Cisco ISR-WAAS requires a minimum of 200GB SSD.

IPsec Traffic

IPsec traffic is restricted on the Cisco ISR 4451-X. The router has the same IPsec functionality as a Cisco ISR G2. The default behavior of the router will be as follows (unless an HSECK9 license is installed):

  • If the limit of 1000 concurrent IPsec tunnels is exceeded, no more tunnels are allowed and the following error message appears:

%CERM-4-TUNNEL_LIMIT: Maximum tunnel limit of 1000 reached for Crypto functionality with securityk9 technology package license.
  • The throughput encrypted traffic supports 250 Mbps.
  • The Cisco 4000 Series ISR does not currently support nested SA transformation such as:

crypto ipsec transform-set transform-1 ah-sha-hmac esp-3des esp-md5-hmac 
crypto ipsec transform-set transform-1 ah-md5-hmac esp-3des esp-md5-hmac 
  • The Cisco 4000 Series ISR does not currently support COMP-LZS configuration.

USB Etoken

USB Etoken is not supported on Cisco IOS XE Denali 16.2.1.

Unified Communication on Cisco 4000 Series ISR

  • For T1/E1 clocking design and configuration changes, For detailed information, see the following Cisco document: T1/E1 Voice and WAN Configuration Guide.

  • For Cisco ISR 4000 Series UC features interpretation with CUCM versions, For detailed information, see the following Cisco document: Compatibility Matrix .

  • For High density DSPfarm PVDM (SM-X-PVDM) and PVDM4 DSP planning, For detailed information, see the following Cisco document: DSP Calculator for DSP planning .

Yang Data Models

Effective with Cisco IOS XE Everest 16.5.1b, the Cisco IOS XE YANG models are available in the form of individual feature modules with new module names, namespaces and prefixes. Revision statements embedded in the YANG files indicate if there has been a model revision.

Navigate to https://github.com/YangModels/yang > vendor > cisco > xe >1651, to see the new, main cisco-IOS-XE-native module and individual feature modules attached to this node.

There are also XPATH changes for the access-list in the Cisco-IOS-XE-acl.yang schema.

The README.md file in the above Github location highlights these and other changes with examples.

CTI Configuration

CME does not support CTI configurations on Cisco 4000 Series ISRs.

New and Changed Information

New Software Features in Cisco 4000 Series ISRs Release Cisco IOS XE Gibraltar 16.10.1a

The following features are supported by the Cisco 4000 Series Integrated Services Routers for Cisco IOS XE Gibraltar 16.10.1a:

Configure the Cellular Back-off Operation

For a router with 3G/4G interface, sometimes service provider network might be busy, congested, in maintenance or in fault state. In such circumstances, service provider network rejects session activation request from the router by returning reject cause code 33 as a response of the activation request. After the router receives the reject cause, the router uses the back-off operation with the pre-defined timer value which could be carrier-specific. While back-off operation is in progress, no new session activation request is sent out from the router. After the back-off period is up, new session activation request is sent out from the router.

Note: There is no command to disable the cellular back-off feature on the router.

The following example shows how to configure the cellular back-off feature to stop continuous session activation requests back to the router:

Router#show cell 0/2/0 all
Profile 1, Packet Session Status = INACTIVE
Profile 2, Packet Session Status = INACTIVE
Profile 3, Packet Session Status = INACTIVE
.
.
.
Success rate is 0 percent (0/5)
Router#show cell 0/2/0 c     
Profile 1, Packet Session Status = INACTIVE
Profile 2, Packet Session Status = INACTIVE
Profile 3, Packet Session Status = INACTIVE
RouterCall end mode = 3GPP
RouterSession disconnect reason type = 3GPP specification defined(6)
RouterSession disconnect reason = Option unsubscribed(33)
RouterEnforcing cellular interface back-off
	Period of back-off = 1 minute(s)
Profile 4, Packet Session Status = INACTIVE
...
Profile 16, Packet Session Status = INACTIVE

.
.
.
Profile 16, Packet Session Status = INACTIVE

Configure the Router for Web User Interface

This section explains how to configure the router to access Web User Interface. Web User Interface require the following basic configuration to connect to the router and manage it.

  • An HTTP or HTTPs server must be enabled with local authentication.

  • A local user account with privilege level 15 and accompanying password must be configured.

  • Vty line with protocol ssh/telnet must be enabled with local authentication. This is needed for interactive commands.

  • You can use the Cisco IOS CLI to enter the necessary configuration commands. To use this method, see Entering the Configuration Commands Manually.

Entering the Configuration Commands Manually

To enter the Cisco IOS commands manually, complete the following steps:

Before you begin

If you do not want to use the factory default configuration because the router already has a configuration, or for any other reason, you can use the procedure in this section to add each required command to the configuration.

Procedure


Step 1

Log on to the router through the Console port or through an Ethernet port.

Step 2

If you use the Console port, and no running configuration is present in the router, the Setup command Facility starts automatically, and displays the following text:

--- System Configuration Dialog ---
 
Continue with configuration dialog? [yes/no]:

Enter no so that you can enter Cisco IOS CLI commands directly.

If the Setup Command Facility does not start automatically, a running configuration is present, and you should go to the next step.

Step 3

When the router displays the user EXEC mode prompt, enter the enable command, and the enable password, if one is configured, as shown in the following example:

Router> enable
password password
Step 4

Enter config mode by entering the configure terminal command, as shown in the following example.

Router> config terminal
Router(config)#
Step 5

Using the command syntax shown, create a user account with privilege level 15.

Step 6

If no router interface is configured with an IP address, configure one so that you can access the router over the network. The following example shows the interface Fast Ethernet 0 configured.

Router(config)# int FastEthernet0
Router(config-if)# ip address 10.10.10.1 255.255.255.248
Router(config-if)# no shutdown
Router(config-if)# exit
Step 7

Configure the router as an http server for nonsecure communication, or as an https server for secure communication. To configure the router as an http server, enter the ip http server command shown in the example:

Router(config)# ip http secure-server
Step 8

Configure the router for local authentication, by entering the ip http authentication local command, as shown in the example:

Router(config)# ip http authentication local
Step 9

Configure the vty lines for privilege level 15. For nonsecure access, enter the transport input telnet command. For secure access, enter the transport input telnet ssh command. An example of these commands follows:

Router(config)# line vty 0 4
Router(config-line)# privilege level 15
Router(config-line)# login local
Router(config-line)# transport input telnet
Router(config-line)# transport output telnet
Router(config-line)# transport input telnet ssh
Router(config-line)# transport output telnet ssh
Router(config-line)# exit
Router(config)# line vty 5 15
Router(config-line)# privilege level 15
Router(config-line)# login local
Router(config-line)# transport input telnet
Router(config-line)# transport output telnet
Router(config-line)# transport input telnet ssh
Router(config-line)# transport output telnet ssh
Router(config-line)# end
 

Resolved and Open Bugs

This section provides information about the caveats in Cisco 4000 Series Integrated Services Routers and describe unexpected behavior. Severity 1 caveats are the most serious caveats. Severity 2 caveats are less serious. Severity 3 caveats are moderate caveats. This section includes severity 1, severity 2, and selected severity 3 caveats.

The open and resolved bugs for this release are accessible through the Cisco Bug Search Tool . This web-based tool provides you with access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in this product and other Cisco hardware and software products. Within the Cisco Bug Search Tool, each bug is given a unique identifier (ID) with a pattern of CSCxxNNNNN, where x is any letter (a-z) and N is any number (0-9). The bug IDs are frequently referenced in Cisco documentation, such as Security Advisories, Field Notices and other Cisco support documents. Technical Assistance Center (TAC) engineers or other Cisco staff can also provide you with the ID for a specific bug. The Cisco Bug Search Tool enables you to filter the bugs so that you only see those in which you are interested.

In addition to being able to search for a specific bug ID, or for all bugs in a product and release, you can filter the open and/or resolved bugs by one or more of the following criteria:

  • Last modified date

  • Status, such as fixed (resolved) or open

  • Severity

  • Support cases

You can save searches that you perform frequently. You can also bookmark the URL for a search and email the URL for those search results.


Note

If the defect that you have requested cannot be displayed, this may be due to one or more of the following reasons: the defect number does not exist, the defect does not have a customer-visible description yet, or the defect has been marked Cisco Confidential.

We recommend that you view the field notices for the current release to determine whether your software or hardware platforms are affected. You can access the field notices from the following location:

http://www.cisco.com/en/US/support/tsd_products_field_notice_summary.html

Using the Cisco Bug Search Tool

For more information about how to use the Cisco Bug Search Tool , including how to set email alerts for bugs and to save bugs and searches, see Bug Search Tool Help & FAQ .

Before You Begin


Note

You must have a Cisco.com account to log in and access the Cisco Bug Search Tool . If you do not have one, you can register for an account.

SUMMARY STEPS

  1. In your browser, navigate to the Cisco Bug Search Tool .
  2. If you are redirected to a Log In page, enter your registered Cisco.com username and password and then, click Log In.
  3. To search for a specific bug, enter the bug ID in the Search For field and press Enter.
  4. To search for bugs related to a specific software release, do the following:
  5. To see more content about a specific bug, you can do the following:
  6. To restrict the results of a search, choose from one or more of the following filters:

DETAILED STEPS


Step 1

In your browser, navigate to the Cisco Bug Search Tool .

Step 2

If you are redirected to a Log In page, enter your registered Cisco.com username and password and then, click Log In.

Step 3

To search for a specific bug, enter the bug ID in the Search For field and press Enter.

Step 4

To search for bugs related to a specific software release, do the following:

  1. In the Product field, choose Series/Model from the drop-down list and then enter the product name in the text field. If you begin to type the product name, the Cisco Bug Search Tool provides you with a drop-down list of the top ten matches. If you do not see this product listed, continue typing to narrow the search results.

  2. In the Releases field, enter the release for which you want to see bugs.

    The Cisco Bug Search Tool displays a preview of the results of your search below your search criteria.

Step 5

To see more content about a specific bug, you can do the following:

  • Mouse over a bug in the preview to display a pop-up with more information about that bug.

  • Click on the hyperlinked bug headline to open a page with the detailed bug information.

Step 6

To restrict the results of a search, choose from one or more of the following filters:

Filter

Description

Modified Date

A predefined date range, such as last week or last six months.

Status

A specific type of bug, such as open or fixed.

Severity

The bug severity level as defined by Cisco. For definitions of the bug severity levels, see Bug Search Tool Help & FAQ .

Rating

The rating assigned to the bug by users of the Cisco Bug Search Tool .

Support Cases

Whether a support case has been opened or not.

Your search results update when you choose a filter.


Resolved and Open Bugs in Cisco 4000 Series Integrated Services Routers

This section contains the following topics:

Open Caveats - Cisco IOS XE Gibraltar 16.10.2

There are no open caveats in Cisco IOS XE Gibraltar 16.10.2 release.

Resolved Caveats - Cisco IOS XE Gibraltar 16.10.2

All resolved bugs for this release are available in the Cisco Bug Search Tool.

Caveat ID Number

Description

CSCvn02171

HOLE is not created when 'acl default passthrough' configured

CSCvn28017

ISR4331 Routers May Crash When "eigrp default-route-tag" Configured on IPv4 AF

CSCvn30138

Crash with show service-insertion service-context command in AppNav Cluster

CSCvn38590

CTS policies download fails with Missing/Incomplete ACEs error

CSCvn51553

QFP crashes with a HW interrupt

CSCvn72973

Device is getting crashed on the "cts role-based enforcement"

CSCvo00968

Radius attr 32 NAS-IDENTIFIIER not sending the FQDN.

CSCvo03458

PKI "revocation check crl none" does not fallback if CRL not reachable

CSCvo08337

Crash when inserting second NIM-2MFT-T1/E1 in 4331

CSCvo24170

Crash due to chunk corruption in ISIS code

CSCvo25785

Crash on an LNS router in process ACCT Periodic Proc

CSCvo27553

PKI incorrect fingerprint calulation during CA authentication

CSCvo38985

Crash at the VRF configuration

Open Caveats - Cisco IOS XE Gibraltar 16.10.1a

All open bugs for this release are available in the Cisco Bug Search Tool.

Caveat ID Number

Description

CSCvj17326

Cisco 4000 Series ISR crashes in o2_cavm_pci_unlock when forwarding large packets for VPLS.

CSCvm25851

Qfp-bqs-internal ucode still crashes with fix in CSCvc35307.

CSCvm39485

Small clock changes or time drifts can cause GETVPN TBAR drops (GDOI/IPSEC-PI)

CSCvm51112

"clear crypto sa vrf MyVrf" triggers crash after updating pre-shared-keys

CSCvm55018

A control plane delete command to flush the queue is not being drained out of the command queue.

CSCvm57021

Crash in CENT-MC-0 process after Doubly-linked list corruption.

CSCvm75066

MPLSoVPN: Change behavior of default route in NHRP. Must insert 0.0.0.0/0 instead of /32.

CSCvm76452

IPSec background crash while sending SNMP trap.

CSCvm76464

The device crashes due to QoS in case of 4k subscribers per subinterface

CSCvm78937

The device crashes when running show ip nhrp brief.

CSCvm80502

Traceroute not working when sourced from NAT Inside interface.

CSCvm81807

The "fman" crashes after calling bipc_buffer_alloc after CPP_FNF_EVENT_MONITOR_CREATE.

CSCvm91323

The device crashes with reload reason: LocalSoftADR and core file generated cpp-mcplo-ucode.

CSCvm93159

Cisco 4000 Series ISRs IPSec VPN with extendable NAT can not be established.

CSCvm93589

Performance monitor not working when "collect transport round-trip-time" is configured.

CSCvm93725

Cisco 4331 ISR static MAC add/remove breaks physical link connectivity.

CSCvm93794

FlexVPN MPLS - label in CEF not added when shortcut to hub is created (by glitch)

CSCvm99745

It does not allow to configure multiple CFM IP SLA with the same source MEP on Cisco 4000 Series ISRs.

CSCvm99778

IOS-PKI: grant auto trustpoint <tp_name> does not work with IOS Sub CA

CSCvn01894

The device IF down/up happen when config "plim ethernet vlan filter disable" with copper SFP.

CSCvn07478

Ethernet FRR switchover takes more than 200ms on EPA10 and EPA100 if remote Rx fiber is pulled.

CSCvn07614

Out of Band DTMF events not Passing to CUCM via SCCP When Using IOS MTP.

CSCvn08656

Cisco 4000 Sereis ISRs netflow miss MMA after DMVPN flapping.

CSCvn09472

The cpp_cp_svr memory leak in module: IPHC Svr Info_st.

CSCvn12253

The software crashes due to watchdog after entered switchport command.

CSCvn14454

iWAN router PDP crashes.

CSCvn17655

Removing ip flow monitor from an interface caused ESP crash.

CSCvn18757

The device crashes after removing a service-policy while the BQS is stuck.

CSCvn19382

A crash is seen after comparing tunnel FIB entries.

CSCvd66978

Cisco 4300 ISR is considered as SKU and processing DLC conversion with red alert/warning.

CSCvm58916

Hseck9 and macsec licenses are present in SL-Only when the configs are not present.

CSCvm65937

Cisco 4351 ISR: Licenses go to OOC and then later gets authorized even when tags are available in VA.

CSCvn01251

Cicco Smart Licensing: Router hangs when downgrading from Cisco IOS XE 16.10 to Cisco IOS XE 16.6.4 CCO image (SL Registered).

CSCvm75711

Wrong licenses listed in show version output when router boots with Cisco IOS XE 16.10.1 image.

CSCvm81231

DLC status seen as complete in show platform software lic dlc inspite of DLC conversion failure on the device.

CSCvm79483

Router gets double registered and consumes two licenses on the same device.

CSCvm88430

HSECk9 which was AUTH before after deregiter is still available.

CSCvn14895

DLC conversion is converting more than what is listed in show platform dlc on production server.

CSCvn06149

Error in Quantity tab to reserve licenses on SLR.

CSCvn14928

Hseck9 license count seen 0 inspite of the license being DLC converted.

CSCvn15214

Device registered to CSSM loosing the registration on upgrade from Cisco IOS XE 16.06.04 CCO SL-mode to Cisco IOS XE 16.10.01.

CSCvm63242

IOS_LICENSE_IMAGE_APPLICATION-3-FAILED: license request failed logs on upgrading to Cisco IOS XE 16.10 image.

CSCvn16433

SKU, Quantity and Smart License values seen incorrect/empty on Satellite Server 5.0.1 in Stage environment.

CSCvn16537

Authorized HSeck9 license not recorded in VA for the registered product instance.

CSCvm62646

Clean up unwanted interfaces under call-home like appnav.

CSCvn20629

Hseck9 license not displayed as consumed on CSSM portal after DLC conversion.

CSCvn22505

Device registration to Satellite 5.0.1 production failing with reason failure to send HTTP messages.

CSCvn22535

Inconsistency between license naming conventions between CSSM and Satellite under conversion history.

CSCvn23045

Conversion History Tab missing on Satellite server 6.0.1 production.

Resolved Caveats - Cisco IOS XE Gibraltar 16.10.1a

All resolved bugs for this release are available in the Cisco Bug Search Tool.

Caveat ID Number

Description

CSCve14080

Error message "LID: Handle 0x0 is invalid" filling console log.s

CSCvg32796

External Interface on the PfR MC stuck in the shutdown state.

CSCvg54267

Cisco IOS and IOS XE Software Cisco Discovery Protocol Denial of Service vulnerability.

CSCvg56110

Error and pending objects when mma policy flap with egress monitor for multi-VRF case.

CSCvh49364

PFRv3 Incorrect time-stamp in traffic-class router change history.

CSCvh57657

NAT MIB not populated when using traditional NAT

CSCvh97101

NAT-HA on Cisco 2900s breaks if it is asymmetric routing.

CSCvi13686

Cisco 4000 Series ISR - Outbound faxes originating from certain fax servers may fail to send.

CSCvi32156

Router crashes when DMVPN tunnel moves accoss ports.

CSCvi50061

Evaluate NTP vulnerabilities.

CSCvi63425

Cisco 4400 ISR router cpp crashed when configured HSRP with PMIPv6.

CSCvi63840

VIF interface counters do not increment with multicast service reflection on IOS-XE.

CSCvi81216

Cisco 4000 Series ISR LISP-Ping src Looback(lo is EID) has been dropped after reloading.

CSCvi90729

IKEv2 CoA does not work with ISE (coa-push=TRUE instead of true).

CSCvi94425

TBAR issues on KS after running "clear crypto gdoi ks coop role".

CSCvj01098

Evaluation of IOS-XE and IOS for OpenSSL CVE-2018-0739 and CVE-2018-0733.

CSCvj02081

CPP crash on L2TP router.

CSCvj03263

H225 gatekeeper request dropping under "ALG PARSER" with ZBF.

CSCvj06909

Reverse-route configuration is unsupported under gdoi crypto map.

CSCvj08248

Packet throughput drops down when enable tunnel visibility with single tcp flow(>1MPPS).

CSCvj11876

Provide Passthrough Reason in IOS-XE for AppNav.

CSCvj13382

IOS-XE FIPS mode is enabled by default in QFP even if it is not enabled in CLI.

CSCvj16489

Enabling IPSec Anti-Replay with SNS in an IPSec profile enables it globally.

CSCvj16818

Cisco 4331 ISR crashes immediately following auto-CA certificate renewal.

CSCvj17682

The Cisco 4300 ISR MAC filtering incorrectly set on builtin ports.

CSCvj20302

Cisco 4000 Series ISR MTP not performing RFC2833 payload type conversion.

CSCvj25678

The device crashes after failing to modify xcode.

CSCvj29593

The debug platform condition start causes keepalive failures with Vasi interface.

CSCvj41550

The default channel operation state changing from I/O to D/O failed when zero-sla enabled.

CSCvj47957

Packet trace does not work with re-injected UTD packets.

CSCvj50005

Cisco 4000 Series PPE ucode crash when processing ipsec traffic on CWS tunnel.

CSCvj50410

Cisco 4331 ISR no collisions count up on duplex mismatch condition.

CSCvj51510

The device crashes after service-policy APPNAV change on WAAS instance.

CSCvj53634

The OID - adslAtucCurrOutputPwr returns incorrect output.

CSCvj57502

The memory leak@CENT-BR-0 when change the path label frequently.

CSCvj61603

The dtmf-interworking rtp-nte command breaking software MTP.

CSCvj71853

The sdavc_ppdk.pack force command not accepted during boot up.

CSCvj72273

GETVPN Key Servers after split may generate TEK with same SPI but different key material.

CSCvj76662

GetVPN TBAR failure does not generate syslogs.

CSCvj84158

PfRv3: BR may crash due to Channel Creation/Modification and Next-Hop State (Copied from CSCva72274).

CSCvj86316

Different ISP name smartprobes are received in branch WAN interface, the channel cannot detect.

CSCvj90426

Dash i2c Kernel message outputted during boot up.

CSCvj90814

Cisco 4000 Series ISR crashes due to memory corruption.

CSCvj91448

PKI:-IP address parsing issue while printing the subject name if classless IP is used in Trustpoint.

CSCvk00074

cBR-8 crash after issuing show platform hardware qfp active infrastructure bqs

CSCvk02072

Hoot-n-holler multicast traffic marked with DSCP 0.

CSCvk12152

Unable to remove command ip nat inside destination.

CSCvk27007

MGCP status remains Down after IOS upgrade caused by CSCvh70570.

CSCvk29692

DSP detected FXO "supervisory disconnect dualtone mid-call" is treated as CNG tone.

CSCvk30939

Memory corruption at PKI session end.

CSCvk34152

Invalid throughput level in the "show version" output.

CSCvk53938

IOS-XE : IPv6 ACL for Tunnel QoS not matched.

CSCvk62278

DSCP value for MGCP signaling traffic cannot be configured.

CSCvk62742

The on demand PCM captures fail on some IOS-XE versions.

CSCvk63602

WAAS Policy Configuration push may caused AppNav Class-maps programming issue in TCAM.

CSCvk65072

The device crashes due ZBF + NAT.

CSCvk70428

Router crashed when enrollment type changed from http to pem in between certificate request process.

CSCvm03696

ISDN PRI calls getting dropped with cause 47 because of bad interaction between CDAPI and TSP layers.

CSCvm14346

The devices memory corruption of mdl_tbl due to fia-history CLI.

CSCvm66103

The device crashes due to communication failure - IPC (Inter-Procedure Call) messages between DSP and RP.

CSCvm67419

Cisco 4400 ISR MACsec drops small frames.

CSCvm98429

Cisco IOS XE Gibraltar 16.10 startup-config got wiped out when load image with config-register set to 2142.

Related Documentation

Cisco IOS Software Documentation

The Cisco IOS XE Fuji 16.x software documentation set consists of Cisco IOS XE Fuji 16.x configuration guides and Cisco IOS command references. The configuration guides are consolidated platform-independent configuration guides organized and presented by technology. There is one set of configuration guides and command references for the Cisco IOS XE Fuji 16.x release train. These Cisco IOS command references support all Cisco platforms that are running any Cisco IOS XE Fuji 16.x software image.

See http://www.cisco.com/en/US/products/ps11174/tsd_products_support_series_home.html

Information in the configuration guides often includes related content that is shared across software releases and platforms.

Additionally, you can use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn . An account on cisco.com is not required.

Communications, Services, and Additional Information

  • To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.

  • To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.

  • To submit a service request, visit Cisco Support.

  • To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.

  • To obtain general networking, training, and certification titles, visit Cisco Press.

  • To find warranty information for a specific product or product family, access Cisco Warranty Finder.

Cisco Bug Search Tool

Cisco Bug Search Tool (BST) is a web-based tool that acts as a gateway to the Cisco bug tracking system that maintains a comprehensive list of defects and vulnerabilities in Cisco products and software. BST provides you with detailed defect information about your products and software.