NetFlow and sFlow Configuration Guide on Cisco 8000 Series Routers, Cisco IOS XR Releases

PDF

NetFlow and sFlow Configuration Guide on Cisco 8000 Series Routers, Cisco IOS XR Releases

sFlow parameters and default values

Want to summarize with AI?

Log in

Lists the sFlow parameters and their default values for configuration on Cisco routers.


Lists the sFlow parameters and their default values for configuration on Cisco routers.

The following table lists the sFlow parameters and default values that you can use when configuring sFlow on the router:

Table 1. sFlow Parameters and Default Values

Parameter

Value

Command

Sampling rate

Default value: 1 out of 10000 packets

sampler-map

Sample header size

128 - 343 bytes (from Cisco IOS XR Release 7.3.4 onwards)

128 - 200 bytes (prior to Cisco IOS XR Release 7.3.4)

Default value: 128 bytes

flow monitor-map

Counter poll interval

5-1800 seconds

Default value: None

flow monitor-map

Collector port

Configurable. Default value: 6343

flow exporter-map

Table 2. Feature History Table

Feature Name

Release Information

Feature Description

Increased sFlow sample-header size Release 7.3.4

You can now increase the sFlow sampling size to 343 bytes of the incoming or outgoing packet header. This enhancement lets the router export a larger sample to the flow-analyzer tool, enabling the tool to provide more accurate network analytics.

In earlier releases, you could configure up to 200 bytes.