The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
show hardware
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
Command Mode
/exec
show hardware access-list lou resource threshold
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
access-list |
Access Control List |
|
lou |
LOU |
|
resource |
hardware resource |
|
threshold |
port expansion threshold |
Command Mode
/exec
show hardware access-list resource pooling
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
access-list |
Access Control List |
|
resource |
Hardware resource |
|
pooling |
ACL programming across TCAM banks |
Command Mode
/exec
show hardware access-list tcam { { template { nfe | nfe2 | l2-l3 | l3 | <name> | all } } | { region } }
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
access-list |
Access Control List |
|
tcam |
Show tcam parameters |
|
region |
Show tcam region sizes |
Command Mode
/exec
show hardware capacity
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
Hardware usage levels for Power, Switching Fabric, Flash, etc |
Command Mode
/exec
show hardware capacity eobc
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
resource inventory and/or usage level |
|
eobc |
EOBC resources |
Command Mode
/exec
show hardware capacity fabric-utilization
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
capacity |
resource inventory and/or usage level |
|
fabric-utilization |
Show per module Fabric utilization |
Command Mode
/exec
show hardware capacity forwarding
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
Hardware usage levels for Power, Switching Fabric, Flash, etc |
|
forwarding |
L2/L3 Forwarding resources |
Command Mode
/exec
show hardware capacity interface
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
Usage levels |
|
interface |
Interface Resources - Tx/Rx drops and Tx/Rx buffers |
Command Mode
/exec
show hardware capacity module
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
resource inventory and/or usage level |
|
module |
SUP, LC, XBAR |
Command Mode
/exec
show hardware capacity power
Syntax Description
|
show |
Show running system information |
|
hardware |
Hardware related |
|
capacity |
resource inventory and/or usage level |
|
power |
power summary |
Command Mode
/exec
show hardware deduplication tah-age-history [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
deduplication |
De-duplication |
|
tah-age-history |
De-dup aged flows Information |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
Command Mode
/exec
show hardware deduplication tah-detail [ tah-hw-table ] [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
deduplication |
De-duplication |
|
tah-detail |
De-dup Detail Information |
|
tah-hw-table |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
Command Mode
/exec
show hardware deduplication tah-summary [ tah-hw-table ] [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
deduplication |
De-duplication |
|
tah-summary |
De-dup Summary Information |
|
tah-hw-table |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
Command Mode
/exec
show hardware fabricpath mac-learning module <module>
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
fabricpath |
Fabric Path |
|
mac-learning |
MAC Learning |
|
module |
Specify a module number |
|
module |
Specify a module number |
Command Mode
/exec
show hardware feature-capability [ detailed ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
feature-capability |
show registered features supported |
|
detailed |
(Optional) detailed |
Command Mode
/exec
show hardware flow aging [ instance <inst> ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
aging |
Aging Info |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow entry address <addr> type { ip | ipv6 | l2 | mpls } [ instance <inst> ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
entry |
Netflow Table Entry |
|
address |
Netflow Table Address |
|
addr |
Netflow Table Address |
|
type |
Flow Type |
|
ip |
Internet Protocol Version 4 |
|
ipv6 |
Internet Protocol Version 6 |
|
l2 |
Layer 2 Protocol |
|
mpls |
MPLS Protocol |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow ip [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
ip |
Internet Protocol Version 4 |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
detail |
(Optional) Detailed Output Display |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow ipv6 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
ipv6 |
Internet Protocol Version 6 |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
detail |
(Optional) Detailed Output Display |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow l2 [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } } ] [ instance <inst> ] [ detail ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
l2 |
Layer 2 Protocol |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
detail |
(Optional) Detailed Output Display |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow mpls [ { { monitor <mname> } | { profile <prof_id> } | { vlan <vlan_id> } | { interface <interface> } } ] [ instance <inst> ] [ detail ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
mpls |
MPLS Protocol |
|
monitor |
(Optional) Netflow Flow Monitor |
|
mname |
(Optional) Netflow Flow Monitor Name |
|
profile |
(Optional) Flow Profile |
|
prof_id |
(Optional) Netflow Profile ID |
|
vlan |
(Optional) Vlan commands |
|
vlan_id |
(Optional) VLAN ID 1-4094 |
|
interface |
(Optional) Interface |
|
interface |
(Optional) Interface Name |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
detail |
(Optional) Detailed Output Display |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow sampler { all | count | index <index> | name <sname> } [ detail ] [ instance <inst> ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
sampler |
Flow Sampler |
|
all |
Netflow Sampler Usage |
|
count |
Netflow Sampler Utilization |
|
index |
Netflow Sampler Index |
|
index |
Netflow Sampler Index |
|
name |
Netflow Sampler Name |
|
sname |
Netflow Sampler Name |
|
detail |
(Optional) Detailed Output Display |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Clipper Instance |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware flow tah-etrap [ module <module> ] [ { unit <unit> slice <slice> } ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Traffic flow information |
|
tah-etrap |
Elephant Trap information |
|
module |
(Optional) Slot/module |
|
module |
(Optional) Slot/module number |
|
unit |
(Optional) Asic Number |
|
unit |
(Optional) Asic Number on the module |
|
slice |
(Optional) slice num on asic |
|
slice |
(Optional) slice number on asic |
Command Mode
/exec
show hardware flow utilization [ instance <inst> ] [ module <num> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
flow |
Netflow Module |
|
utilization |
NT Table Utilization |
|
instance |
(Optional) Instance |
|
inst |
(Optional) Earl Instance |
|
module |
(Optional) Line card module |
|
num |
(Optional) slot number |
Command Mode
/exec
show hardware forwarding interface statistics mode
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
forwarding |
Show hardware information for forwarding path |
|
interface |
Interface |
|
statistics |
Statistics |
|
mode |
Statistics mode |
Command Mode
/exec
show hardware forwarding memory health detail
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
forwarding |
forwarding information |
|
memory |
memory information |
|
health |
memory health information |
|
detail |
show the detail |
Command Mode
/exec
show hardware forwarding memory health summary
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
forwarding |
forwarding information |
|
memory |
memory information |
|
health |
memory health information |
|
summary |
show the summary |
Command Mode
/exec
show hardware [ forwarding ] ip verify [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
forwarding |
(Optional) Show hardware information for forwarding path |
|
ip |
IP |
|
verify |
Show IP packet verification checks enabled in hardware |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware profile forwarding-mode
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware profile forwarding-mode |
|
profile |
profile forwarding-mode |
|
forwarding-mode |
forwarding-mode |
Command Mode
/exec
show hardware profile module <module>
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware profile |
|
profile |
Profile settings |
|
module |
Enter module number |
|
module |
Command Mode
/exec
show hardware profile packet-drop { status | data [ instance <cap_instance> ] | event [ instance <cap_instance> ] }
Syntax Description
|
show |
Show running system information |
|
hardware |
Change hardware usage settings |
|
profile |
Profile settings |
|
packet-drop |
Packet Drop parameters |
|
status |
Packet Drop status |
|
data |
Packet Drop circular-buffer data |
|
instance |
(Optional) Packet Drop captured instance |
|
cap_instance |
(Optional) Value 1-5 |
|
event |
Packet Drop event-buffer data |
|
instance |
(Optional) Packet Drop captured instance |
|
cap_instance |
(Optional) Value 1-5 |
Command Mode
/exec
{ show hardware profile portmode }
Syntax Description
|
show |
Show running system information |
|
hardware |
Change hardware usage settings |
|
profile |
profile settings |
|
portmode |
QSFP port mode setting |
Command Mode
/exec
show hardware profile status [ module <module> ] [ detail ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware usage settings |
|
profile |
Show current table usage |
|
status |
Show status of dynamic resource allocation |
|
module |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
module |
(Optional) Slot/module number |
|
detail |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show hardware profile tcam region
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
profile |
profile |
|
tcam |
Show tcam parameters |
|
region |
Show tcam region sizes |
Command Mode
/exec
show hardware qos afd profile [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
afd |
Show Approximate Fair Dropping config |
|
profile |
Show AFD profile config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos burst-detect max-records
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
burst-detect |
Show oobst burst-detect info |
|
max-records |
Show oobst burst-detect max-records |
Command Mode
/exec
show hardware qos eoq stats-class [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show QoS related information |
|
eoq |
Show Extended Output Queue(EOQ) related information |
|
stats-class |
Show EOQ Statistics class selection config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos include ipg [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
include |
Show inlcude config |
|
ipg |
Show whether to include IPG in Shaping/Policing config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos ing-pg-hdrm-reserve [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
ing-pg-hdrm-reserve |
Show ing-pg-hdrm-reserve config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos ing-pg-no-min [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
ing-pg-no-min |
Show ing-pg-no-min config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos ing-pg-share [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
ing-pg-share |
Show ing-pg-share config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos min-buffer [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
min-buffer |
Show min-buffer config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos ns-buffer-profile [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show qos related information |
|
ns-buffer-profile |
Show ns-buffer-profile config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware qos ns-mcq3-alias [ module <module> ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
qos |
Show QoS related information |
|
ns-mcq3-alias |
Show NS mc-queue-3 alias class selection config |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress | urpf-fail ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
rate-limiter |
Show Rate-Limiter configs and statistics |
|
layer-3 |
(Optional) Layer-3 control and Routed packets |
|
l3-opts |
(Optional) |
|
multicast |
(Optional) Multicast data packets |
|
mcast-opts |
(Optional) |
|
layer-2 |
(Optional) Layer-2 control and Bridged packets |
|
l2-opts |
(Optional) |
|
opts |
(Optional) |
|
f1 |
(Optional) Control packets from F1 modules to supervisor |
|
f1-opts |
(Optional) |
|
span-egress |
(Optional) SPAN/ERSPAN egress packets |
|
urpf-fail |
(Optional) URPF fail packets |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware rate-limiter [ module <module> ] [ layer-3 { <l3-opts> | multicast <mcast-opts> } | layer-2 <l2-opts> | <opts> | f1 <f1-opts> | span-egress | urpf-fail ]
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
rate-limiter |
Show Rate-Limiter configs and statistics |
|
layer-3 |
(Optional) Layer-3 control and Routed packets |
|
l3-opts |
(Optional) |
|
multicast |
(Optional) Multicast data packets |
|
mcast-opts |
(Optional) |
|
layer-2 |
(Optional) Layer-2 control and Bridged packets |
|
l2-opts |
(Optional) |
|
opts |
(Optional) |
|
f1 |
(Optional) Control packets from F1 modules to supervisor |
|
f1-opts |
(Optional) |
|
span-egress |
(Optional) SPAN/ERSPAN egress packets |
|
urpf-fail |
(Optional) URPF fail packets |
|
module |
(Optional) Specify a module number |
|
module |
(Optional) Specify a module number |
Command Mode
/exec
show hardware rate-limiter span-egress
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
rate-limiter |
Show Rate-Limiter configs and statistics |
|
span-egress |
SPAN/ERSPAN egress packets |
Command Mode
/exec
show hardware vxlan storm-control
Syntax Description
|
show |
Show running system information |
|
hardware |
Show hardware information |
|
vxlan |
VxLAN Information |
|
storm-control |
Storm Control Information |
Command Mode
/exec
show { hostname | switchname }
Syntax Description
|
show |
Show running system information |
|
hostname |
show the system's hostname |
|
switchname |
show the system's hostname |
Command Mode
/exec
show hosts
Syntax Description
|
show |
Show running system information |
|
hosts |
Show information about DNS |
Command Mode
/exec
show hsrp [ interface <interface-id> ] [ group <group-number> ] [ active | init | learn | listen | speak | standby ] + [ all ] [ brief [ all ] | detail ] [ ipv4 | ipv6 ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
interface |
(Optional) Groups on this interface |
|
interface-id |
(Optional) Interface |
|
active |
(Optional) Groups in active state |
|
init |
(Optional) Groups in init state |
|
listen |
(Optional) Groups in listen state |
|
standby |
(Optional) Groups in standby state |
|
learn |
(Optional) Groups in learn state |
|
speak |
(Optional) Groups in speak state |
|
group |
(Optional) Group number |
|
group-number |
(Optional) Group Number |
|
all |
(Optional) Include groups in disabled state |
|
brief |
(Optional) Brief output |
|
detail |
(Optional) Detailed output |
|
ipv4 |
(Optional) HSRP V4 Groups |
|
ipv6 |
(Optional) HSRP V6 Groups |
|
all |
(Optional) Display all VIPs |
Command Mode
/exec
show hsrp anycast [ <id> { ipv4 | ipv6 | both } ] [ brief ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
anycast |
Anycast related commands |
|
id |
(Optional) Bundle number |
|
ipv4 |
(Optional) Associate IP Version 4 for the bundle |
|
ipv6 |
(Optional) Associate IP Version 6 for the bundle |
|
both |
(Optional) Associate IP Version 4 and 6 for the bundle |
|
brief |
(Optional) Brief output |
Command Mode
/exec
show hsrp anycast interface { vlan | bdi } <id>
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
anycast |
Anycast related commands |
|
interface |
Bundle on this interface Interface |
|
vlan |
VLAN interface |
|
bdi |
Bridge-Domain interface |
|
id |
VLAN number |
Command Mode
/exec
show hsrp anycast remote-db [ <id> { ipv4 | ipv6 | both } ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
anycast |
Anycast related commands |
|
remote-db |
Remote data base for the bundle |
|
id |
(Optional) Bundle number |
|
ipv4 |
(Optional) Associate IP Version 4 for the bundle |
|
ipv6 |
(Optional) Associate IP Version 6 for the bundle |
|
both |
(Optional) Associate IP Version 4 and 6 for the bundle |
Command Mode
/exec
show hsrp anycast summary
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
anycast |
Anycast related commands |
|
summary |
Show HSRP summary |
Command Mode
/exec
show hsrp bfd-sessions [ interface <interface-id> [ to <ipaddress> ] ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
bfd-sessions |
BFD sessions |
|
interface |
(Optional) Groups on this interface |
|
interface-id |
(Optional) Interface |
|
to |
(Optional) To IP address |
|
ipaddress |
(Optional) Sessions to IP address |
Command Mode
/exec
show hsrp delay [ interface <interface-id> ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
delay |
Group initialisation delay |
|
interface |
(Optional) Groups on this interface |
|
interface-id |
(Optional) Interface |
Command Mode
/exec
show hsrp mgo [ name <name> | brief ]
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
mgo |
Show HSRP mgo details |
|
name |
(Optional) Redundancy name string |
|
name |
(Optional) name string |
|
brief |
(Optional) show HSPR mgo brief |
Command Mode
/exec
show hsrp summary
Syntax Description
|
show |
Show running system information |
|
hsrp |
Hot Standby Router Protocol (HSRP) information |
|
summary |
Show HSRP summary |
Command Mode
/exec
Feedback