Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.4(x)

show mac-list

show mac-list { [ { <maclist-name> | <maclist-cfg-name> } [ { seq <seq_no> | { <mac_addr> [ <mac_mask> ] } } ] ] }

Syntax Description


show	Show running system information
mac-list	Show mac-lists
maclist-name	(Optional) Name of mac-list
maclist-cfg-name	(Optional) Known mac-list name
seq	(Optional) Sequence number
seq_no	(Optional) Sequence number
mac_addr	(Optional) MAC address
mac_mask	(Optional) MAC mask

Command Mode

/exec

show mac-move policy

Syntax Description


show	Show
mac-move	Display mac-move policy
policy	Display mac-move policy

Command Mode

/exec

show mac address-table

show mac address-table <module> [ count ] [ static | dynamic | secure ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> | [ vdc1 <vdc> | <e-vdc> ] | fe1 <feid> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> | [ vdc <vdc> | <e-vdc> ] | fe <feid> ] + } ] [ hex ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
module	Module Number
count	(Optional) Number of entries
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
address	(Optional) address
address1	(Optional) address
mac-addr	(Optional) MAC Address
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
interface	(Optional) Interface
interface-name	(Optional) Interface name
vlan	(Optional) VLAN
vlan1	(Optional) VLAN
id	(Optional) VLAN ID
vdc	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
vdc1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
vdc	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
e-vdc	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
fe	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
fe1	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
feid	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
hex	(Optional) display swid/sswid/lid in hex

Command Mode

/exec

show mac address-table

show mac address-table [ static | dynamic | secure ] [ local ] [ { [ address1 <mac-addr> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan1 <id> ] + } | { [ address <mac-addr> | interface <interface-name> | vlan <id> ] + } | { [ address2 <mac-addr> | interface1 <interface-name> | vni <vni-id> | [ peer-ip <peer-ipv4> | peer-ipv6 <peer-ipv6> ] ] + } | { [ address3 <mac-addr> | interface2 <interface-name> | vni1 <vni-id> | es { <esid-opt1> | <esid-opt2> | all } ] + } ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
local	(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN
address	(Optional) address
address1	(Optional) address
address2	(Optional) address
address3	(Optional) address
mac-addr	(Optional) MAC Address
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
interface	(Optional) Interface
interface1	(Optional) Interface
interface-name	(Optional) Interface name
interface2	(Optional) Interface
interface-name	(Optional) Interface name
vlan	(Optional) VLAN
vlan1	(Optional) VLAN
id	(Optional) VLAN ID
vni	(Optional) VXLAN Network Identifier
vni1	(Optional) VXLAN Network Identifier
vni-id	(Optional) VXLAN Network Identifier
peer-ip	(Optional) VXLAN Peer IP Address
peer-ipv4	(Optional) VXLAN Peer IP Address
peer-ipv6	(Optional) VXLAN Peer IPv6 Address
es	(Optional) EVPN Remote ESID
esid-opt1	(Optional) EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID Option 1
esid-opt2	(Optional) EEEE.EEEE.EEEE.EEEE.EEEE ESID Option 2
all	(Optional) all ESIs

Command Mode

/exec

show mac address-table aging-time

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
aging-time	Configured/default age

Command Mode

/exec

show mac address-table count

show mac address-table count [ static | dynamic | secure ] [ local ] [ { [ interface <interface-name> | { switch-id <swid> [ sub-switch-id <sswid> ] } | vlan <id> ] + } | { [ interface1 <interface-name> | vni <vni-id> | [ peer-ip <peer-ipv4> | peer-ipv6 <peer-ipv6> ] ] + } ]

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
count	Number of MAC entries
static	(Optional) Display Static Entries
dynamic	(Optional) Display Dynamic Entries
secure	(Optional) Display Secure Entries
local	(Optional) Display MAC Entries Learned Locally and Not on the Overlay/VXLAN
vlan	(Optional) VLAN
id	(Optional) VLAN ID
interface	(Optional) Interface
interface1	(Optional) Interface
interface-name	(Optional) Interface name
switch-id	(Optional) Remote Switch ID
swid	(Optional) Switch ID
sub-switch-id	(Optional) Remote Sub Switch ID
sswid	(Optional) Sub Switch ID
vni	(Optional) VXLAN Network Identifier
vni-id	(Optional) VXLAN Network Identifier
peer-ip	(Optional) VXLAN Peer IP Address
peer-ipv4	(Optional) VXLAN Peer IP Address
peer-ipv6	(Optional) VXLAN Peer IPv6 Address

Command Mode

/exec

show mac address-table count es

show mac address-table count es { <es-id> | <es-id2> | all }

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
count	Number of MAC entries
es	EVPN Remote ESID
es-id	EE:EE:EE:EE:EE:EE:EE:EE:EE:EE ESID
es-id2	EEEE.EEEE.EEEE.EEEE.EEEE ESID
all	all ESIs

Command Mode

/exec

show mac address-table limit

show mac address-table limit { all | system | vlan | interface }

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
limit	Configured/default mac limit

Command Mode

/exec

show mac address-table limit user-defined

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
limit	mac limit
user-defined	limit the number of unique mac addresses used on any type of L3 interface

Command Mode

/exec

show mac address-table loop-detect

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC
loop-detect	Display Action for Mac Loop Detection

Command Mode

/exec

show mac address-table multicast

show mac address-table multicast [ vlan <vlan> | bridge-domain <bdid> ]

Syntax Description


show	Show running system information
mac	MAC configuration commands
address-table	MAC Address Table
multicast	mcast mac OIF Static Entry
vlan	(Optional) VLAN
vlan	(Optional) VLAN
bridge-domain	(Optional) BD
bdid	(Optional) BD

Command Mode

/exec

show mac address-table notification mac-move

Syntax Description


show	show
mac	MAC configuration commands
address-table	MAC Address Table
notification	Display Notification Information
mac-move	Mac Move Notification

Command Mode

/exec

show macsec mka

show macsec mka [ summary ]

Syntax Description


show	Show running system information
macsec	Show MACSEC information
mka	Show MKA information
summary	(Optional) Show MKA summary information

Command Mode

/exec

show macsec mka session

show macsec mka session [ interface <ifname> ] [ details ]

Syntax Description


show	Show running system information
macsec	Show MACSEC information
mka	Show MKA information
session	Show MKA session information
interface	(Optional) Specify interface
ifname	(Optional) Interface list
details	(Optional) Show MKA detailed information

Command Mode

/exec

show macsec mka statistics

show macsec mka statistics [ interface <ifname> ]

Syntax Description


show	Show running system information
macsec	Show MACSEC information
mka	Show MKA information
statistics	Show MKA statistics
interface	(Optional) Specify interface
ifname	(Optional) Interface list

Command Mode

/exec

show macsec policy

show macsec policy [ <policy_name> ]

Syntax Description


show	Show running system information
macsec	Show MACSEC policy information
policy	Show MACSEC policy information
policy_name	(Optional) Name of MACSEC Policy

Command Mode

/exec

show macsec secy statistics

show macsec secy statistics [ interface <ifname> ]

Syntax Description


show	Show running system information
macsec	Show MACSEC information
secy	Show MACSEC secy entity information
statistics	Show MACSEC secy statistics
interface	(Optional) Specify interface
ifname	(Optional) Interface list

Command Mode

/exec

show maintenance maint-delay

Syntax Description


show	Show running system information
maintenance	maintenance
maint-delay	maintenance mode CLI release delay value

Command Mode

/exec

show maintenance on-reload reset-reasons

Syntax Description


show	Show running system information
maintenance	maintenance
on-reload	on reload maintenance mode configuration
reset-reasons	system reset reasons

Command Mode

/exec

show maintenance profile

show maintenance profile [ <mode> ]

Syntax Description


show	Show running system information
maintenance	maintenance
profile	maintenance profile
mode	(Optional)

Command Mode

/exec

show maintenance snapshot-delay

Syntax Description


show	Show running system information
maintenance	maintenance
snapshot-delay	after_maintenance snapshot delay value

Command Mode

/exec

show maintenance timeout

Syntax Description


show	Show running system information
maintenance	maintenance
timeout	timeout value

Command Mode

/exec

show mcast

show mcast [ vsan <i0> ]

Syntax Description


show	Show running system information
vsan	(Optional) Enter VSAN
i0	(Optional) VSAN id

Command Mode

/exec

show mdns-sd controller detail

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
detail	mDNS Controller Detail

Command Mode

/exec

show mdns-sd controller export-summary

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
export-summary	mDNS Controller Summary

Command Mode

/exec

show mdns-sd controller service-list

show mdns-sd controller service-list [ { name <sl-name> } ]

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
service-list	mDNS Service List
name	(Optional) mDNS Service List Name
sl-name	(Optional) mDNS Service List Name

Command Mode

/exec

show mdns-sd controller service-policy

show mdns-sd controller service-policy [ { name <ser-pol-name> } ]

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
service-policy	mDNS Service Policy
name	(Optional) Specify name of mDNS Service Policy
ser-pol-name	(Optional) mDNS Service Policy Name

Command Mode

/exec

show mdns-sd controller statistics

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
statistics	mDNS Controller Statistics

Command Mode

/exec

show mdns-sd controller summary

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
controller	mDNS Controller
summary	mDNS Controller Summary

Command Mode

/exec

show mdns-sd filter-results

show mdns-sd filter-results <rr_name> <pol_name> <vlan-id> <filter-dir> <msg-data-type>

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
filter-results	check filter results by inputting the arguments
rr_name	input RR name
pol_name	input pol name
vlan-id	input vlan-id
filter-dir	input filter direction in(1)/out(2)
msg-data-type	input msg-data-type query(1)/advertisement(2)

Command Mode

/exec

show mdns-sd service-definition

show mdns-sd service-definition [ { name <ser-def-name> } | { type { built-in | custom } } ]

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
service-definition	mDNS Service Definition
name	(Optional) mDNS Service Definition Name
ser-def-name	(Optional) mDNS Service Definition Name
type	(Optional) mDNS Service Definition Type
built-in	(Optional) Built-in Service Definition
custom	(Optional) Custom Service Definition

Command Mode

/exec

show mdns-sd service-list

show mdns-sd service-list [ { direction { in | out } } | { name <sl-name> } ]

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
service-list	mDNS Service List
direction	(Optional) mDNS Service List Direction
in	(Optional) Service List of type IN
out	(Optional) Service List of type OUT
name	(Optional) mDNS Service List Name
sl-name	(Optional) mDNS Service List Name

Command Mode

/exec

show mdns-sd service-policy

show mdns-sd service-policy [ { name <ser-pol-name> } ]

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
service-policy	mDNS Service Policy
name	(Optional) Specify name of mDNS Service Policy
ser-pol-name	(Optional) mDNS Service Policy Name

Command Mode

/exec

show mdns-sd statistics global

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
statistics	mDNS Statistics
global	mDNS global Statistics

Command Mode

/exec

show mdns-sd statistics raw-stats

show mdns-sd statistics raw-stats { all | all-non-zero | <index> }

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
statistics	mDNS Statistics
raw-stats	mDNS rawStats Statistics
all	ALL Raw stats
all-non-zero	ALL non-zero Raw stats
index	Specify the index of Raw Stats

Command Mode

/exec

show mdns-sd summary

Syntax Description


show	Show running system information
mdns-sd	mDNS Gateway
summary	mDNS Summary

Command Mode

/exec

show mdns-sd summary vlan

show mdns-sd summary vlan <vlan-id>

Syntax Description


show	Show running system information
mdns-sd	MDNS Gateway
summary	mDNS Summary
vlan	mDNS Vlan Summary
vlan-id	VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

Command Mode

/exec

show module

show module [ { <module> } | { <s0> [ <santa-cruz-range> ] } | { fabric [ <module> ] } ]

Syntax Description


show	Show running system information
module	Show module information
module	(Optional) Enter module number
s0	(Optional) Show xbar information
santa-cruz-range	(Optional) please enter the xbar number
fabric	(Optional) Show fabric information

Command Mode

/exec

show module bandwidth-fairness

show module <module> bandwidth-fairness

Syntax Description


show	Show running system information
module	Show module information
module	Enter module number
bandwidth-fairness	Show bandwidth fairness status

Command Mode

/exec

show module port type

show module <module1> port type

Syntax Description


show	Show running system information
module	Show module information
module1	Enter module number
port	Show port type
type	Show port type

Command Mode

/exec

show module uptime

Syntax Description


show	Show running system information
module	Show module information
uptime	Show how long the module has been up and running

Command Mode

/exec

show monitor

Syntax Description


show	Show running system information
monitor	Show Ethernet SPAN information

Command Mode

/exec

show monitor session

show monitor session { all | <session_number> | warp | range <session_range> } [ { drops | brief | stats } ]

Syntax Description


show	Show running system information
monitor	Show Ethernet SPAN information
session	Show session info
all	All sessions
session_number
warp	warp session
range	Specify a range
session_range
brief	(Optional) Brief information
drops	(Optional) show drop count
stats	(Optional) show monitor stats

Command Mode

/exec

show mpls extended-ecmp

Syntax Description


show	Show running system information
mpls	MPLS routing ECMP mode
extended-ecmp	extended-ecmp mode

Command Mode

/exec

show mpls forwarding statistics

show mpls forwarding statistics [ interface { <interface> | all } ]

Syntax Description


show	Show running system information
mpls	MPLS information
forwarding	Display MPLS software forwarded
statistics	Traffic statistics
interface	(Optional) Interface specific information
interface	(Optional) Interface chosen to display statistics
all	(Optional) All interfaces

Command Mode

/exec

show mpls interfaces

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
interfaces	Display MPLS Interfaces

Command Mode

/exec

show mpls interfaces detail

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
interfaces	Interfaces
detail	Detail

Command Mode

/exec

show mpls interfaces statistics

show mpls interfaces <ifname> statistics

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
interfaces	Interfaces
ifname	Interface Name
statistics	statistics

Command Mode

/exec

show mpls ip bindings

show mpls ip bindings [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ generic ] [ { <prefix> { <mask> | <mask-length> } | <prefix-mask> } [ longer-prefix ] ] [ neighbor <addr> | local ] [ [ local-label <local-label> [ local-to <local-label-max> ] ] | [ remote-label <remote-label> [ remote-to <remote-label-max> ] ] ] [ advertisement-prefix-list | detail ]

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
ip	MPLS IP information
bindings	Show the MPLS IP Label Information Base (LIB)
vrf	(Optional) VRF Routing/Forwarding instance information
vrf-name	(Optional) VPN Routing/Forwarding instance name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display LIB information in all VRFs
generic	(Optional) Display generic labels
prefix	(Optional) Destination prefix
mask	(Optional) Destination prefix mask
mask-length	(Optional) Mask length
prefix-mask	(Optional) Destination prefix/mask
longer-prefix	(Optional) Include longer matches
neighbor	(Optional) Display labels from LDP neighbor
addr	(Optional) IP adjacency address
local	(Optional) Display only locally assigned labels
local-label	(Optional) Match locally assigned label values
local-label	(Optional) Locally assigned label value
local-to	(Optional) Label range
local-label-max	(Optional) Locally assigned label value
remote-label	(Optional) Match remotely assigned label values
remote-label	(Optional) Remotely assigned label value
remote-to	(Optional) Label range
remote-label-max	(Optional) Remotely assigned label value
advertisement-prefix-list	(Optional) Show advertisement prefix lists
detail	(Optional) Show detailed information

Command Mode

/exec

show mpls ip bindings summary

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
ip	MPLS IP information
bindings	Show the MPLS IP Label Information Base (LIB)
summary	Show summary information

Command Mode

/exec

show mpls ip ttl

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
ip	Display IP information
ttl	TTL related information

Command Mode

/exec

show mpls label range

Syntax Description


show	Show running system information
mpls	MPLS configuration commands
label	Label properties
range	Label range

Command Mode

/exec

show mpls load-sharing

Syntax Description


show	Show running system information
mpls	MPLS information
load-sharing	Show mpls load sharing options

Command Mode

/exec

show mpls oam echo statistics

show mpls oam echo statistics [ summary ]

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
oam	Display OAM information
echo	Echo request information
statistics	Detailed Echo packet statistics
summary	(Optional) Echo packet statistics summary

Command Mode

/exec

show mpls static binding

show mpls static binding [ vrf { <vrf-name> | <vrf-known-name> } ] { { ipv4 [ <prefix> { <mask> | <mask-length> } | <prefix-mask> ] [ local | remote ] [ nexthop <addr> ] [ inconsistency ] [ lsp <slb_name> ] } | { ipv6 [ <ipv6-prefix> ] [ local | remote ] [ ipv6-nexthop <ipv6-addr> ] [ inconsistency ] } | all [ inconsistency ] }

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
static	Show MPLS static information
binding	Show static label bindings
ipv4	Show ipv4 static label bindings
ipv6	Show ipv6 static label bindings
all	Show all static label bindings
vrf	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
local	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
remote	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
inconsistency	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
prefix	(Optional) Destination ipv4 prefix
mask	(Optional) Destination ipv4 prefix mask
mask-length	(Optional) Ipv4 mask length
prefix-mask	(Optional) Destination prefix/mask
nexthop	(Optional) Ipv4 next hop address
addr	(Optional) Ipv4 Next hop address
ipv6-nexthop	(Optional) Ipv6 next hop address
lsp	(Optional) LSP Name

Command Mode

/exec

show mpls strip labels

show mpls strip labels [ all | static | dynamic | <label_val> ]

Syntax Description


show	Show running system information
mpls	MPLS information
strip	Stripping of MPLS headers
labels	labels added in the system
all	(Optional) all labels [default]
static	(Optional) labels programmed using cli
dynamic	(Optional) dynamically learned
label_val	(Optional) Label to show

Command Mode

/exec

show mpls switching

show mpls switching [ labels <label> [ <max-label> ] | interface <intf> | { <ip-addr> | <ipv4-prefix> } [ vrf { <vrf-name> | <vrf-known-name> | all } ] | <ipv6-prefix> [ vrf { <vrf-name> | <vrf-known-name> | all } ] | traffic-eng srpath [ <srte-path-id> ] | aggregate [ ipv4 | ipv6 ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] | { fec { ipv4_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | ipv6_prefix [ vrf { <vrf-name> | <vrf-known-name> | all } ] | deagg [ vrf { <vrf-name> | <vrf-known-name> | all | ias_vpnv4 | ias_vpnv6 } ] | per-bd <per-bd-vlan-id> } } | { summary } ] [ detail ] [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
switching	Display the MPLS label switching database
traffic-eng	(Optional) Show traffic-engineering related entries
srpath	(Optional) Show traffic-engineering segment-routing path entries
ip-addr	(Optional) Match destination address
ipv4-prefix	(Optional) Specify an IP prefix/mask
fec	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
private	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
labels	(Optional) Show a specific label-related information
label	(Optional) Low label value
max-label	(Optional) High label value
interface	(Optional) Match outgoing interface
aggregate	(Optional) Show aggregate-related information
intf	(Optional) Specify outgoing interface
summary	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
detail	(Optional) Detailed information
ipv4_prefix	(Optional) IPv4 prefix
ipv6_prefix	(Optional) IPv6 prefix
ipv4	(Optional) Display IPv4 information
ipv6	(Optional) Display IPv6 information
deagg	(Optional) De-aggregation
per-bd	(Optional) BD FEC
ias_vpnv4	(Optional) Display Inter-AS V4 information
ias_vpnv6	(Optional) Display Inter-AS V6 information
srte-path-id	(Optional) Traffic-engineering segment-routing path id
per-bd-vlan-id	(Optional) Per BD id
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs

Command Mode

/exec

show mpls switching clients

Syntax Description


show	Show running system information
mpls	Display MPLS status and configuration
switching	Display the MPLS label switching database
clients	Display ULIB client components

Command Mode

/exec

show mts-buildup check

Syntax Description


show	Show
mts-buildup	Display mts-buildup
check	Display mts-buildup check

Command Mode

/exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
bgp	Display BGP related information
mdt-safi	Display Auto-discovered BGP MDT-SAFI database
auto-discovery	Display Auto-discovered BGP MDT-SAFI database
mdt-source	(Optional) Source address of MVPN neighbor

Command Mode

/exec

show mvpn bgp mdt

show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source <src-addr> ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
bgp	Display BGP related information
mdt-safi	Display Auto-discovered BGP MDT-SAFI database
auto-discovery	Display Auto-discovered BGP MDT-SAFI database
mdt-source	(Optional) Source address of MVPN neighbor
src-addr	(Optional) Source Address

Command Mode

/exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
encap	Display MDT Encap table
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs

Command Mode

/exec

show mvpn mdt encap

show mvpn mdt encap [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
encap	Display MDT Encap table
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs

Command Mode

/exec

show mvpn mdt route

show mvpn mdt route [ detail ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
route	Display MDT route information
detail	(Optional) Display detailed information

Command Mode

/exec

show mvpn mdt route

show mvpn mdt route [ detail ]

Syntax Description


show	Show running system information
mvpn	Display Multicast VPN information
mdt	Display MDT information
route	Display MDT route information
detail	(Optional) Display detailed information

Command Mode

/exec

show mvr

show mvr [ verbose ]

Syntax Description


show	Show running system information
mvr	show mvr info
verbose	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

show mvr groups

Syntax Description


show	Show running system information
mvr	show mvr info
groups	show mvr groups config

Command Mode

/exec

show mvr interface

show mvr interface [ <if0> ]

Syntax Description


show	Show running system information
mvr	show mvr info
interface	show mvr interfaces
if0	(Optional) Interface name

Command Mode

/exec

show mvr members

show mvr members [ interface <if0> ]

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
interface	(Optional) show active mvr groups config on interface
if0	(Optional) Interface name

Command Mode

/exec

show mvr members count

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
count	Active mvr groups on each mvr-vlan

Command Mode

/exec

show mvr members vlan

show mvr members { vlan <vlan-id> }

Syntax Description


show	Show running system information
mvr	show mvr info
members	show active mvr groups
vlan	vlan
vlan-id	Enter MVR Vlan

Command Mode

/exec

show mvr receiver-ports

show mvr receiver-ports [ <if0> ]

Syntax Description


show	Show running system information
mvr	show mvr info
receiver-ports	List MVR receiver ports
if0	(Optional) Interface name

Command Mode

/exec

show mvr source-ports

show mvr source-ports [ <if0> ]

Syntax Description


show	Show running system information
mvr	show mvr info
source-ports	List MVR source ports
if0	(Optional) Interface name

Command Mode

/exec

Bias-Free Language

Results

Chapter: M Show Commands

M Show Commands

show mac-list

show mac-move policy

show mac address-table

show mac address-table

show mac address-table aging-time

show mac address-table count

show mac address-table count es

show mac address-table limit

show mac address-table limit user-defined

show mac address-table loop-detect

show mac address-table multicast

show mac address-table notification mac-move

show macsec mka

show macsec mka session

show macsec mka statistics

show macsec policy

show macsec secy statistics

show maintenance maint-delay

show maintenance on-reload reset-reasons

show maintenance profile

show maintenance snapshot-delay

show maintenance timeout

show mcast

show mdns-sd controller detail

show mdns-sd controller export-summary

show mdns-sd controller service-list

show mdns-sd controller service-policy

show mdns-sd controller statistics

show mdns-sd controller summary

show mdns-sd filter-results

show mdns-sd service-definition

show mdns-sd service-list

show mdns-sd service-policy

show mdns-sd statistics global

show mdns-sd statistics raw-stats

show mdns-sd summary

show mdns-sd summary vlan

show module

show module bandwidth-fairness

show module port type

show module uptime

show monitor

show monitor session

show mpls extended-ecmp

show mpls forwarding statistics

show mpls interfaces

show mpls interfaces detail

show mpls interfaces statistics

show mpls ip bindings

show mpls ip bindings summary

show mpls ip ttl

show mpls label range

show mpls load-sharing

show mpls oam echo statistics

show mpls static binding

show mpls strip labels

show mpls switching

show mpls switching clients

show mts-buildup check

show mvpn bgp mdt

show mvpn bgp mdt

show mvpn mdt encap

show mvpn mdt encap

show mvpn mdt route

show mvpn mdt route

show mvr

show mvr groups

show mvr interface

show mvr members

show mvr members count

show mvr members vlan

show mvr receiver-ports

show mvr source-ports

Was this Document Helpful?

Contact Cisco