Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.4(x)

show ecp

show ecp [ detail ]

Syntax Description


show	Show running system information
ecp	ECP (Edge Control Protocol)
detail	(Optional) Detailed information

Command Mode

/exec

show elam report

Syntax Description


show	Show running system information
elam	elam
report	Show ELAM report
l2	(Optional) Layer 2 header report
l3	(Optional) Layer 3 header report
l4	(Optional) Layer 4 header report
aclqos	(Optional) Aclqos report
mcast	(Optional) Multicast report
mpls	(Optional) MPLS report

Command Mode

/exec/elamtah/outsel2

show email

Syntax Description


show	Show running system information
email	Pipe email configuration

Command Mode

/exec

show encryption service status

Syntax Description


show	Show running system information
encryption	Encryption service
service	Encryption service
status	Encryption service status

Command Mode

/exec

show environment

show environment [ fan [ detail1 ] | power [ detail ] [ ampere ] [ input ] | temperature [ module <module> | <s0> <santa-cruz-range> | psu ] ]

Syntax Description


show	Show running system information
environment	system environment information
fan	(Optional) Fan information
power	(Optional) Power capacity and power distribution information
detail	(Optional) Detail Fan-tray information when used with Fan. Detail Power capacity and power distribution information when used with Power
detail1	(Optional) Detail Fan-tray information when used with Fan
ampere	(Optional) Ampere Power capacity and power distribution information
input	(Optional) Power supply power input
temperature	(Optional) temperature sensor information
module	(Optional) enter a module number
module	(Optional) please enter the module number
s0	(Optional) xbar
santa-cruz-range	(Optional) please enter the xbar number
psu	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

show environment power history

show environment power history [ target { 1min | 1hr | 24hr | 14days [ day <day_num> ] } | peak ]

Syntax Description


show	Show running system information
environment	system environment information
power	Power capacity and power distribution information
history	PS history
target	(Optional) Power usage target
1min	(Optional) 1min
1hr	(Optional) 1hr
24hr	(Optional) 24hr
14days	(Optional) 14days
day	(Optional) specify day
day_num	(Optional) For 14 days specify the number 1-14 to display op
peak	(Optional) Power usage history peak

Command Mode

/exec

show epbr policy

show epbr policy [ <policy-name> ] [ reverse ]

Syntax Description


show	Show running system information
epbr	Show information about epbr
policy	EPBR policy name
policy-name	(Optional) Policy name
reverse	(Optional) Apply the policy in reverse dir

Command Mode

/exec

show epbr statistics policy

show epbr statistics policy <policy-name> [ reverse ]

Syntax Description


show	Show running system information
epbr	Show information about epbr
statistics	EPBR Statistics
policy	EPBR Policy
TABLE_pmap_intf	(Optional)
pmap_interface	(Optional) Ingress Interface
policy-name	Policy name
reverse	(Optional) Apply the policy in reverse dir

Command Mode

/exec

show errdisable detect

show errdisable { detect | recovery }

Syntax Description


show	Show running system information
errdisable	Error disable
detect	Show errdisable detect
recovery	Show errdisable recovery

Command Mode

/exec

show errdisable flap

Syntax Description


show	Show running system information
errdisable	Error disable
flap	linkstate flapping

Command Mode

/exec

show esmc counters interface

show esmc counters { interface <if0> | all }

Syntax Description


show	Show running system information
esmc	Ethernet Synchronization Messaging Channel

Command Mode

/exec

show esmc packet-trace

Syntax Description


show	Show running system information
esmc	Ethernet Synchronization Messaging Channel

Command Mode

/exec

show ethanalyzer background-session

show ethanalyzer background-session { [ processes ] | [ config ] }

Syntax Description


show	Show running system information
ethanalyzer	Configure cisco packet analyzer
background-session	Show background packet analyzer sessions
processes	(Optional) Show background packet analyzer sessions processes
config	(Optional) Print background packet analyzer session configuration file

Command Mode

/exec

show evb

Syntax Description


show	Show running system information
evb	EVB (Edge Virtual Bridge)

Command Mode

/exec

show evb hosts

show evb hosts [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> | name <host-name> ] + } ]

Syntax Description


show	Show running system information
evb	EVB (Edge Virtual Bridge)
hosts	Host information
summary	(Optional) Display summary information
detail	(Optional) Display detailed information
internal-info	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
mac	(Optional) Display hosts by MAC address
mac-addr	(Optional) MAC Address
interface	(Optional) Display hosts by interface
intf-name	(Optional) Interface name
vlan	(Optional) Display hosts by VLAN
vlan-id	(Optional) VLAN ID
vni	(Optional) Display hosts by Virtual Network Identifier
vni-id	(Optional) VNI
ip	(Optional) Display hosts by IP address
ipv6	(Optional) Display hosts by IPv6 address
ip-addr	(Optional) IP address
name	(Optional) Display hosts by host name
host-name	(Optional) Host name substring

Command Mode

/exec

show evb vsi

show evb vsi [ { summary | detail | internal-info } ] [ { [ mac <mac-addr> | interface <intf-name> | vlan <vlan-id> | vni <vni-id> | ip <ip-addr> | ipv6 <ipv6-addr> ] + } ]

Syntax Description


show	Show running system information
evb	EVB (Edge Virtual Bridge)
vsi	Virtual Station Interface (VSI) information
summary	(Optional) Display summary information
detail	(Optional) Display detailed information
internal-info	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
mac	(Optional) Display VSI by MAC address
mac-addr	(Optional) MAC Address
interface	(Optional) Display VSI by interface
intf-name	(Optional) Interface name
vlan	(Optional) Display VSI by VLAN
vlan-id	(Optional) VLAN ID
vni	(Optional) Display VSI by Virtual Network Identifier
vni-id	(Optional) VNI
ip	(Optional) Display VSI by IP address
ipv6	(Optional) Display VSI by IPv6 address
ip-addr	(Optional) IP address

Command Mode

/exec

show event manager environment

show event manager environment { all | <varname> }

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
environment	Show information about environment variables
all	Show information about all the configured environment variables
varname	The environment variable name on which information is required

Command Mode

/exec

show event manager event-types

show event manager event-types [ all | <event-type-name> ] [ module <module-id> ]

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
event-types	Show information about registered event types
all	(Optional) Show information about advanced event types as well
event-type-name	(Optional) Show information about the specified event type
module	(Optional) Show information about event types on other modules
module-id	(Optional) Module Id

Command Mode

/exec

show event manager events action-log

show event manager events action-log [ policy <policy-name> | event-type <event-type-name> ]

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
events	Show information about the history of past events
action-log	Show policy action logs
policy	(Optional) Name of policy
policy-name	(Optional) Enter policy name
event-type	(Optional) Name of event
event-type-name	(Optional) Enter event type

Command Mode

/exec

show event manager history events

show event manager history events [ detail ] [ maximum <n-events> ] [ severity <sev> ]

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
history	Show information about the history of past activity
events	Show information about the history of past events
detail	(Optional) Show information about the event parameters as well
maximum	(Optional) Specify an upper limit on the number of events to be shown
n-events	(Optional) Specify the maximum number of events to be shown
severity	(Optional) Show only those events whose severity is >= specified severity
sev	(Optional) Enter the severity threshold

Command Mode

/exec

show event manager policy-state

show event manager policy-state <name> [ module <module-id> ]

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
policy-state	Show information about the state of a policy
name	Name of the policy
module	(Optional) Get the information from a module
module-id	(Optional) Module Id

Command Mode

/exec

show event manager script system

show event manager script system { all | <script-name> }

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
script	Show information about a script policy
system	Show information about a system script policy
all	Show all the available system script policies
script-name	Name of the system script policy

Command Mode

/exec

show event manager system-policy

show event manager system-policy [ all | <policy-name> ]

Syntax Description


show	Show running system information
event	Event Manager commands
manager	Event Manager commands
system-policy	Show information about default system policies
all	(Optional) Show all policies (including advanced and non-overridable ones)
policy-name	(Optional) Show detailed information about the specified policy

Command Mode

/exec

Bias-Free Language

Book Title

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.4(x)

Chapter Title

E Show Commands

Results

Chapter: E Show Commands

E Show Commands

show ecp

show elam report

show email

show encryption service status

show environment

show environment power history

show epbr policy

show epbr statistics policy

show errdisable detect

show errdisable flap

show esmc counters interface

show esmc packet-trace

show ethanalyzer background-session

show evb

show evb hosts

show evb vsi

show event manager environment

show event manager event-types

show event manager events action-log

show event manager history events

show event manager policy-state

show event manager script system

show event manager system-policy

Was this Document Helpful?

Contact Cisco