Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.4(x)

show nat itd

Syntax Description


show	Show running system information
nat	IP NAT information
itd	IP NAT ITD

Command Mode

/exec

show nbm defaults

show nbm defaults [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
defaults	Default config
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm flow-policy

show nbm flow-policy [ name { <policy-name> } ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flow-policy	Flow policy show command
name	(Optional) Policy name
policy-name	(Optional) Policy name value
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm flows

show nbm flows [ group-based [ group <group-ip> ] | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } | source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] | interface <if-name> | priority { low | critical } [ [ oif interface <if-name> ] | [ rpf interface <if-name> ] | [ policer { slot <slot> unit <unit> slice <slice> } ] | [ policer-intf interface <if-name> ] ] | logical-id { none | any | <lid-val> } | profile-id <prof-id> ] [ all | active | inactive | no-receiver ] [ detail ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flows	NBM flows (default will be active flows)
active	(Optional) Active flows (default)
inactive	(Optional) Inactive flows
no-receiver	(Optional) Flows without any receiver
all	(Optional) Both active and inactive flows
group-based	(Optional) Multicast group based (*,G) flows to IGMP receivers
flow-policy	(Optional) Flow policy
cfg-pol-name	(Optional) Policy name
unknown-pol-name	(Optional) Policy name
source	(Optional) Source IP address
source-ip	(Optional) Source IP address
group	(Optional) Multicast group
group-ip	(Optional) Multicast group address
interface	(Optional) Ingress interface
priority	(Optional) Flow Priority
low	(Optional) low
critical	(Optional) critical
logical-id	(Optional) Logical ID (LID)
oif	(Optional) OIF
interface	(Optional) Interface
if-name	(Optional) Physical or Logical interface
rpf	(Optional) RPF
interface	(Optional) Interface
if-name	(Optional) Physical or Logical interface
policer	(Optional) Policer
slot	(Optional) Slot number (1-based)
slot	(Optional) Slot number (1-based)
unit	(Optional) Unit number (0-based)
unit	(Optional) Unit number (0-based)
slice	(Optional) Slice number (0-based)
slice	(Optional) Slice number (0-based)
policer-intf	(Optional) Policer Intf
interface	(Optional) Interface
if-name	(Optional) Physical or Logical interface
lid-val	(Optional) Logical ID (LID) value
any	(Optional) Any Logical ID (LID)
none	(Optional) Without any Logical ID (LID)
profile-id	(Optional) Profile ID
prof-id	(Optional) Profile ID value
detail	(Optional) Detailed output
if-name	(Optional) Interface name

Command Mode

/exec

show nbm flows pending-stitch

show nbm flows pending-stitch [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flows	NBM flows
pending-stitch	All pending stitch flows

Command Mode

/exec

show nbm flows static

show nbm flows static [ group <grp> ] [ source <src> ] [ stitched | unstitched ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flows	NBM flows (default will be active flows)
static	Static NBM Flows
group	(Optional) Multicast group
grp	(Optional) Multicast group address
source	(Optional) Source ip of sender
src	(Optional) Source address
stitched	(Optional) Show only successfully provisioned oif
unstitched	(Optional) Show only failed to provision oif
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm flows statistics

show nbm flows statistics [ group-based [ group <group-ip> ] | source <source-ip> [ group <group-ip> ] | group <group-ip> [ source <source-ip> ] | { flow-policy { <cfg-pol-name> | <unknown-pol-name> } } | interface <if-name> | logical-id { none | any | <lid-val> } | profile-id <prof-id> ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flows	NBM flows
statistics	Flow statistics
group-based	(Optional) Multicast group based (*,G) flows to IGMP receivers
source	(Optional) Source IP address
source-ip	(Optional) Source IP address value
group	(Optional) Multicast group
group-ip	(Optional) Multicast group address value
flow-policy	(Optional) Flow policy
cfg-pol-name	(Optional) Policy name
unknown-pol-name	(Optional) Policy name
interface	(Optional) Ingress interface
if-name	(Optional) Interface interface name
logical-id	(Optional) Logical ID (LID)
lid-val	(Optional) Logical ID (LID) value
any	(Optional) Any Logical ID (LID)
none	(Optional) Without any Logical ID (LID)
profile-id	(Optional) Profile ID
prof-id	(Optional) Profile ID value
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm flows summary

show nbm flows summary [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
flows	NBM Flows
summary	NBM Flow Summary
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm host-policy all

show nbm host-policy all { sender | { receiver { local | external } } } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
host-policy	Host policy
all	All policies on switch
sender	Sender Policy
receiver	Receiver Policy
local	Local receiver policy
external	External receiver policy
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show nbm host-policy applied receiver

show nbm host-policy applied receiver { { local { all | wildcard | interface <if-name> } | external } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] }

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
host-policy	Host policy
applied	Applied policies only
receiver	Receiver Policy
local	Local receiver policy
all	All policies on switch
wildcard	All wildcard policies
external	External receiver policy
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name
all	(Optional) Display all VRFs
interface	Interface
if-name	Interface name

Command Mode

/exec

show nbm host-policy applied sender

show nbm host-policy applied sender { { { all | wildcard } [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ] } | { interface <if-name> } }

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
host-policy	Host policy
applied	Applied policies only
sender	Sender Policy
all	All policies on switch
wildcard	Wildcard host policy
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name
interface	Interface
if-name	Interface name

Command Mode

/exec

show nbm info shm table flow-detail vrf

show nbm info shm table flow-detail vrf { <vrf-name> | <nbm-vrf-known-name> | all } [ oif <oif-name> ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
info	info
shm	Shared memory related commands
table	SHM table type
flow-detail	Flow mapping table in detail
oif	(Optional) Outgoing interface
oif-name	(Optional) flow-detail Physical or Logical interface
vrf	Display per-VRF information
all	Display all VRFs
vrf-name	VRF name
nbm-vrf-known-name	NBM VRF Name

Command Mode

/exec

show nbm interface

show nbm interface { all | <if-name> } [ flow-bandwidth [ ingress | egress ] ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
interface	interface
all	Display all interface
if-name	Physical or Logical interface
flow-bandwidth	(Optional) Utilized Bandwidth interface table
ingress	(Optional) Flow bandwidth for Ingress
egress	(Optional) Flow bandwidth for Egress

Command Mode

/exec

show nbm interface bandwidth

show nbm interface { bandwidth | bandwidth-utilized } [ interface <if-name> ] [ vrf { <vrf-name> | <nbm-vrf-known-name> | all } ]

Syntax Description


show	Show running system information
nbm	Non Blocking Multicast
interface	interface
bandwidth	Bandwidth interface table
bandwidth-utilized	Utilized Bandwidth interface table
vrf	(Optional) Display per-VRF information
all	(Optional) Display all VRFs
interface	(Optional) Interface
if-name	(Optional) Physical or Logical interface
vrf-name	(Optional) VRF name
nbm-vrf-known-name	(Optional) NBM VRF Name

Command Mode

/exec

show ngoam interface statistics

Syntax Description


TABLE_stats	(Optional) interface statistics table
interface-name	(Optional) interface namestring
tx	(Optional) ngoam probe transmit on the interface
rx	(Optional) ngoam probe receive on the interface
show	Show running system information
ngoam	ngoam
interface	probe packet interface
statistics	ngoam probe interface statistics

Command Mode

/exec

show ngoam loop-detection status

show ngoam loop-detection status [ vlan <vlan-range> [ port <port-range> ] ] [ history ]

Syntax Description


show	Show running system information
ngoam	Configure ngoam
loop-detection	Configure sld
status	show blocked/recovering state loops
vlan	(Optional) ngoam loop-detection vlan
port	(Optional) ngoam loop-detection port
history	(Optional) show history of loops detected
vlan-range	(Optional) vlan range max span 1024, Example: 2000-3000,400,500
port-range	(Optional) Interface for loop detection

Command Mode

/exec

show ngoam loop-detection summary

Syntax Description


show	Show running system information
ngoam	Configure ngoam
loop-detection	Show loop detection
summary	ngoam loop detection summary

Command Mode

/exec

show ngoam loopback

show ngoam loopback { { statistics { session { <handle> | all } | summary } } | { status { session { <handle> | all } } } }

Syntax Description


show	Show running system information
ngoam	ngoam
loopback	ngoam loopback
statistics	ngoam loopback statistics
summary	ngoam loopback statistics summary
status	ngoam loopback status
session	ngoam loopback session
session	ngoam loopback session
handle	ngoam loopback session handle
handle	ngoam loopback session handle
all	Display results for all ping/loopback sessions
all	Display results for all ping/loopback sessions
TABLE_statistics	(Optional) statistics table
sender-handle	(Optional) sender handle
connect-check-id	(Optional) connect check id
last-clear-stats	(Optional) last clear time for statistics
TABLE_stats_attr	(Optional) Stats attributes table
stat-attr	(Optional) stats type
stat-value	(Optional) stats value
TABLE_statistics_summary	(Optional) statistics summary table
last-clear-summary-stats	(Optional) last clear time for summary statistics
tx	(Optional) summary request sent
rx	(Optional) summary reply received
timeout	(Optional) summary timeout
unsent	(Optional) summary unsent
resp-tx	(Optional) summary resp tx
resp-rx	(Optional) summary resp rx
resp-unsent	(Optional) summary resp unsent
resp-dup	(Optional) Duplicate responses received
req-sw-fwd	(Optional) Request pkts sw fwded
resp-sw-fwd	(Optional) Response pkts sw fwded
req-drop	(Optional) Requests dropped
resp-drop	(Optional) Responses dropped
TABLE_status	(Optional) database status table
st-sender-handle	(Optional) sender handle
type	(Optional) ngoam ping type
state	(Optional) ngoam ping state

Command Mode

/exec

show ngoam pathtrace

show ngoam pathtrace { { statistics { summary | { session { <handle> | all } } } } | { database session { <handle> | all } [ detail ] } }

Syntax Description


show	Show running system information
ngoam	ngoam
pathtrace	ngoam pathtrace
statistics	ngoam pathtrace statistics
summary	ngoam pathtrace statistics summary
session	ngoam pathtrace session
handle	ngoam pathtrace session handle
all	Display results for all pathtrace sessions
database	ngoam pathtrace results from the database
session	ngoam pathtrace session
all	Display results for all pathtrace sessions
handle	ngoam pathtrace session handle
detail	(Optional) Show detailed stats if present

Command Mode

/exec

show ngoam probe

show ngoam probe { { statistics { summary | { session { <handle> | all } } } } }

Syntax Description


show	Show running system information
ngoam	ngoam
probe	ngoam probe
statistics	ngoam probe statistics
summary	ngoam probe statistics summary
session	ngoam probe session
handle	ngoam probe session handle
all	Display results for all probe sessions
TABLE_stats	(Optional) statistics table
sender-handle	(Optional) sender handle
transaction-id	(Optional) Transaction Identifier
dst-vip	(Optional) Destination Vtep ip address
vni	(Optional) vxlan header vni
oam-type	(Optional) draft pang oam type
flow-str	(Optional) 128 byte flow string.
last-clear-stats	(Optional) last clear time for statistics
req-sent	(Optional) request sent
req-not-sent	(Optional) request not sent or failed
statistics-end	(Optional) statistics table end marker
TABLE_summary	(Optional) statistics summary table
last-clear-summary-stats	(Optional) last clear time for summary statistics
tx	(Optional) summary request sent
rx	(Optional) summary reply received
timeout	(Optional) summary timeout
unsent	(Optional) summary unsent
resp-tx	(Optional) summary resp tx
resp-rx	(Optional) summary resp rx
resp-unsent	(Optional) summary resp unsent

Command Mode

/exec

show ngoam traceroute statistics

show ngoam traceroute statistics { summary | { session { <handle> | all } } }

Syntax Description


show	Show running system information
ngoam	ngoam
traceroute	ngoam traceroute
statistics	ngoam traceroute statistics
summary	ngoam traceroute statistics summary
session	ngoam traceroute session
handle	ngoam traceroute session handle
all	Display results for all traceroute sessions
TABLE_stats	(Optional) statistics table
sender-handle	(Optional) sender handle
last-clear-stats	(Optional) last clear time for statistics
TABLE_stats_attr	(Optional) Stats attributes table
stat-attr	(Optional) stats type
stat-value	(Optional) stats value
TABLE_summary	(Optional) statistics summary table
last-clear-summary-stats	(Optional) last clear time for summary statistics
tx	(Optional) summary request sent
rx	(Optional) summary reply received
timeout	(Optional) summary timeout
unsent	(Optional) summary unsent
resp-tx	(Optional) summary resp tx
resp-rx	(Optional) summary resp rx
resp-unsent	(Optional) summary resp unsent
resp-dup	(Optional) Duplicate responses received

Command Mode

/exec

show ngoam xconnect session

show ngoam xconnect session { <id> [ iodb ] | all [ dbdump ] }

Syntax Description


show	Show running system information
ngoam	ngoam information
xconnect	crossconnect info
session	xc session id
id	Vlan-id of the xc
iodb	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
all	show summary info for all sessions

Command Mode

/exec

show npiv status

Syntax Description


show	Show running system information
npiv	Show information about the npiv feature
status	Show the status of the npiv feature

Command Mode

/exec

show npv external-interface-usage

show npv external-interface-usage [ server-interface <if0> ]

Syntax Description


show	Show running system information
npv	Show information about NPV
external-interface-usage	Show external interface usage by server interfaces
server-interface	(Optional) Show external interface usage by a server interface
if0	(Optional)

Command Mode

/exec

show npv flogi-table

show npv flogi-table [ { interface <if0> | vsan <i0> } ]

Syntax Description


show	Show running system information
npv	Show information about NPV
flogi-table	Show information about FLOGI sessions
interface	(Optional) Show information about FLOGI sessions for a server interface
if0	(Optional)
vsan	(Optional) Show information about FLOGI sessions for a VSAN
i0	(Optional)

Command Mode

/exec

show npv status

show npv status [ vsan <i0> ]

Syntax Description


show	Show running system information
npv	Show information about NPV
status	Show NPV status
vsan	(Optional) Show NPV status for a specific VSAN
i0	(Optional)

Command Mode

/exec

show npv traffic-map

show npv traffic-map [ server-interface <if0> ]

Syntax Description


show	Show running system information
npv	Show information about NPV
traffic-map	Show information about Traffic Map
server-interface	(Optional) Show information about Traffic map for a server interface
if0	(Optional)

Command Mode

/exec

show ntp access-groups

Syntax Description


show	Show running system information
ntp	Show NTP information
access-groups	Display NTP access groups

Command Mode

/exec

show ntp authentication-keys

Syntax Description


show	Show running system information
ntp	Show NTP information
authentication-keys	Display authentication keys

Command Mode

/exec

show ntp authentication-status

Syntax Description


show	Show running system information
ntp	Show NTP information
authentication-status	NTP Authentication Status

Command Mode

/exec

show ntp information

Syntax Description


show	Show running system information
ntp	Show NTP information
information	Show ntp information

Command Mode

/exec

show ntp logging-status

Syntax Description


show	Show running system information
ntp	Show NTP information
logging-status	Display NTP logging status

Command Mode

/exec

show ntp peer-status

Syntax Description


show	Show running system information
ntp	Show NTP information
peer-status	Show the status for all the server/peers

Command Mode

/exec

show ntp peers

Syntax Description


show	Show running system information
ntp	Show NTP information
peers	Show all the peers.

Command Mode

/exec

show ntp rts-update

Syntax Description


show	Show running system information
ntp	Show NTP information
rts-update	Show if the RTS update is enabled

Command Mode

/exec

show ntp session status

Syntax Description


show	Show running system information
ntp	Show NTP information
session	Show the session information
status	Show the session status

Command Mode

/exec

show ntp source-interface

Syntax Description


show	Show running system information
ntp	Show NTP information
source-interface	Source interface configured

Command Mode

/exec

show ntp source

Syntax Description


show	Show running system information
ntp	Show NTP information
source	Source IP address configured

Command Mode

/exec

show ntp statistics

show ntp statistics { [ io ] | [ local ] | [ memory ] | peer { ipaddr { <ipv4_0> | <ipv6_1> } | name <s0> } }

Syntax Description


show	Show running system information
ntp	Show NTP information
statistics	Show the NTP statistics
io	(Optional) Show the input-output statistics.
local	(Optional) Show the counters maintained by the local NTP.
memory	(Optional) Show the statistics counters related to memory code.
peer	Show the per-peer statistics counter of a peer.
ipaddr	Peer's IP address
ipv4_0
name	Peer's Name
s0

Command Mode

/exec

show ntp status

Syntax Description


show	Show running system information
ntp	Show NTP information
status	Show the NTP distribution status

Command Mode

/exec

show ntp trusted-keys

Syntax Description


show	Show running system information
ntp	Show NTP information
trusted-keys	Display trusted keys

Command Mode

/exec

show nve adjacency mpls

Syntax Description


show	Display NVE information
nve	Configure NVE information
adjacency	Downstream Adjacencies
mpls	Segment routing

Command Mode

/exec

show nve bfd neighbors

Syntax Description


show	Display NVE information
nve	Configure NVE information
bfd	BFD
neighbors	neighbors

Command Mode

/exec

show nve core-links

Syntax Description


show	Display NVE information
nve	Configure NVE information
core-links	Core-links

Command Mode

/exec

show nve ethernet-segment

show nve ethernet-segment [ summary ] [ { esi <esi-id> } ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
ethernet-segment	Ethernet-segment
summary	(Optional) Ethernet-segment summary
esi	(Optional) ESI Value
esi-id	(Optional) ESI ID

Command Mode

/exec

show nve evi

Syntax Description


show	Display NVE information
nve	Configure NVE information
evi	Ethernet Virtual Identifier

Command Mode

/exec

show nve interface

show nve interface [ <nve-if> [ detail ] ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
interface	Interface
nve-if	(Optional) NVE interface
detail	(Optional) Detailed information

Command Mode

/exec

show nve mpls

Syntax Description


show	Display NVE information
nve	Configure NVE information
mpls	Segment routing

Command Mode

/exec

show nve multisite dci-links

Syntax Description


show	Display NVE information
nve	Configure NVE information
multisite	multisite
dci-links	dci-links

Command Mode

/exec

show nve multisite fabric-links

Syntax Description


show	Display NVE information
nve	Configure NVE information
multisite	multisite
fabric-links	fabric-links

Command Mode

/exec

show nve peers

show nve peers [ [ [ interface <nve-if> | peer-ip { <user-peer-ip> | <user-peer-ipv6> } | control-plane | data-plane ] [ detail ] ] | [ control-plane-vni [ vni <vni-id> | peer-ip { <user-peer-ip> | <user-peer-ipv6> } ] ] | [ controller ] ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
peers	Show peers
interface	(Optional) Interface
nve-if	(Optional) NVE interface
detail	(Optional) Detailed information
peer-ip	(Optional) Show a specific peer
user-peer-ip	(Optional) Remote Peer IP address
control-plane	(Optional) Show peers learned via control plane
data-plane	(Optional) Show peers learned via data plane
control-plane-vni	(Optional) Show details of control plane vnis
vni	(Optional) VNI ID
vni-id	(Optional) Virtual Network Identifier
controller	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

show nve peers interface counters

show nve peers { <addr> | <addr-v6> } interface <nve-if> counters

Syntax Description


show	Display NVE information
nve	Configure NVE information
peers	NVE Peer
addr	Remote Peer IP Address
counters	Counters
interface	Interface
nve-if	NVE interface

Command Mode

/exec

show nve peers mpls

show nve peers mpls [ peer-ip { <user-peer-ip> | <user-peer-ipv6> } ] [ detail ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
peers	Show peers
mpls	Segment routing peers
detail	(Optional) Detailed information
peer-ip	(Optional) Show a specific peer
user-peer-ip	(Optional) Remote Peer IP address

Command Mode

/exec

show nve peers vni interface counters

show nve peers { { <addr> | <addr-v6> } | all } vni { <vni-id> | all } interface <nve-if> counters

Syntax Description


show	Display NVE information
nve	Configure NVE information
peers	NVE Peer
addr	Remote Peer IP Address
all	Show counters for all peers/VNIs
vni	Virtual Network Identifier
vni-id	Virtual Network Identifier
counters	Counters
interface	Interface
nve-if	NVE interface

Command Mode

/exec

show nve replication-servers

Syntax Description


show	Display NVE information
nve	Configure NVE information
replication-servers	replication-servers

Command Mode

/exec

show nve resource-limits multicast

Syntax Description


show	Display NVE information
nve	Configure NVE information
resource-limits	Display resource use and maximums
multicast	Display underlay multicast group use and maximums

Command Mode

/exec

show nve vni

show nve vni [ { { interface <nve-if> | <vni-id> | all } [ detail ] } | control-plane | data-plane | summary | controller ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vni	Virtual Network Identifier
vni-id	(Optional) Virtual Network Identifier
interface	(Optional) Interface
nve-if	(Optional) NVE interface
all	(Optional) Display all VNIs
detail	(Optional) Detailed information
control-plane	(Optional) show vni learned via BGP
data-plane	(Optional) show vni learned via data plane
summary	(Optional) show vni summary
controller	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

show nve vni counters

show nve vni { <vni-id> | all } counters

Syntax Description


show	Display NVE information
nve	Configure NVE information
vni	Virtual Network Identifier
vni-id	Virtual Network Identifier
all	Show counters for all vnis
counters	Counters

Command Mode

/exec

show nve vni ingress-replication

show nve vni ingress-replication [ { interface <nve-if> | <vni-id> } ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vni	Virtual Network Identifier
ingress-replication	ingress-replication
vni-id	(Optional) Virtual Network Identifier
interface	(Optional) Interface
nve-if	(Optional) NVE interface

Command Mode

/exec

show nve vni mdt

show nve vni { <vni-id> | all } mdt [ { local | remote | peer-sync } ] [ { <cs> <cg> } | { <cs6> <cg6> } ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vni	Virtual Network Identifier
vni-id	Virtual Network Identifier
all	Display MDT info for all vnis
mdt	Data MDT(Multicast Distribution Tree)
local	(Optional) Show MDT info for multicast traffic which are learnt locally
remote	(Optional) Show MDT info for multicast traffic which are learnt from remote
peer-sync	(Optional) Show MDT info for multicast traffic which are synced from VPC peers
cs	(Optional) Customer Source IP address
cg	(Optional) Customer Group IPi address

Command Mode

/exec

show nve vni peer-vtep

show nve vni peer-vtep [ { interface <nve-if> | <vni-id> } ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vni	Virtual Network Identifier
peer-vtep	Show static peer-vtep configured per vni
vni-id	(Optional) Virtual Network Identifier
interface	(Optional) Interface
nve-if	(Optional) NVE interface

Command Mode

/exec

show nve vrf

show nve vrf [ vrf-name ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vrf	VRF name
vrf-name	(Optional) vrf name

Command Mode

/exec

show nve vrf mdt

show nve vrf { <vrfname> | all } mdt [ { local | remote | peer-sync } ] [ { <cs> <cg> } | { <cs6> <cg6> } ]

Syntax Description


show	Display NVE information
nve	Configure NVE information
vrf	VRF name
vrfname	VRF name
all	Display MDT info for all VRFs
mdt	Data MDT(Multicast Distribution Tree)
local	(Optional) Show MDT info for multicast traffic which are learnt locally
remote	(Optional) Show MDT info for multicast traffic which are learnt from remote
peer-sync	(Optional) Show MDT info for multicast traffic which are synced from VPC peers
cs	(Optional) Customer Source IP address
cg	(Optional) Customer Group IP address

Command Mode

/exec

show nve vxlan-params

Syntax Description


show	Display NVE information
nve	Configure NVE information
vxlan-params	VxLAN Parameters

Command Mode

/exec

show nxapi-server logs

Syntax Description


show	Show running system information
nxapi-server	Show NX-API Server
logs	Show NX-API Server logs

Command Mode

/exec

show nxapi

Syntax Description


show	Show running system information
nxapi	Show nxapi status

Command Mode

/exec

Bias-Free Language

Results

Chapter: N Show Commands

N Show Commands

show nat itd

show nbm defaults

show nbm flow-policy

show nbm flows

show nbm flows pending-stitch

show nbm flows static

show nbm flows statistics

show nbm flows summary

show nbm host-policy all

show nbm host-policy applied receiver

show nbm host-policy applied sender

show nbm info shm table flow-detail vrf

show nbm interface

show nbm interface bandwidth

show ngoam interface statistics

show ngoam loop-detection status

show ngoam loop-detection summary

show ngoam loopback

show ngoam pathtrace

show ngoam probe

show ngoam traceroute statistics

show ngoam xconnect session

show npiv status

show npv external-interface-usage

show npv flogi-table

show npv status

show npv traffic-map

show ntp access-groups

show ntp authentication-keys

show ntp authentication-status

show ntp information

show ntp logging-status

show ntp peer-status

show ntp peers

show ntp rts-update

show ntp session status

show ntp source-interface

show ntp source

show ntp statistics

show ntp status

show ntp trusted-keys

show nve adjacency mpls

show nve bfd neighbors

show nve core-links

show nve ethernet-segment

show nve evi

show nve interface

show nve mpls

show nve multisite dci-links

show nve multisite fabric-links

show nve peers

show nve peers interface counters

show nve peers mpls

show nve peers vni interface counters

show nve replication-servers

show nve resource-limits multicast

show nve vni

show nve vni counters

show nve vni ingress-replication

show nve vni mdt

show nve vni peer-vtep

show nve vrf

show nve vrf mdt

show nve vxlan-params

show nxapi-server logs

show nxapi

Was this Document Helpful?

Contact Cisco