Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 10.4(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: April 3, 2024

W Show Commands

show wred-queue qos-group-map

Syntax Description


show	Show running system information
wred-queue	Show WRED qos-group information
qos-group-map	Display mapping of the qos-group information

Command Mode

/exec

show wrr-queue qos-group-map

Syntax Description


show	Show running system information
wrr-queue	Display mapping of traffic priority (CoS) values to L3 Multicast
qos-group-map	Show wrr-queue qos-group-map

Command Mode

/exec

show wrr unicast-bandwidth

Syntax Description


show	Show running system information
wrr	unicast bandwidth configuration
unicast-bandwidth	rate in precentage of data rate

Command Mode

/exec

show wwn oui

Syntax Description


show	Show running system information
wwn	show wwn information
oui	Show oui database

Command Mode

/exec

show wwn status

show wwn status [ { backplane-prom | block-id <i0> | non-volatile-pss | volatile-pss } ]

Syntax Description


show	Show running system information
wwn	show wwn information
status	Show overall WWN Usage and Alarm Status
backplane-prom	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
block-id	(Optional) Enter a block id.
i0	(Optional) Enter a block id.
non-volatile-pss	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED
volatile-pss	THIS KEYWORD OR VARIABLE IS NOT SUPPORTED

Command Mode

/exec

show wwn switch

Syntax Description


show	Show running system information
wwn	show wwn information
switch	Show switch WWN

Command Mode

/exec

show wwn test

show wwn test { get_swwn_from_pwwn <wwn0> | get_pwwn_from_swwn <wwn1> if_index <i0> | get_ifindex_from_fwwn <wwn2> | get_ifindex_from_pwwn <wwn3> | validate_pwwn_given_swwn <wwn4> pwwn <wwn5> | get_all_pwwn_for_slot <i1> | get_kc_type_given_swwn <wwn6> pwwn <wwn7> | get_ifindex_from_pwwn_swwn <wwn8> pwwn <wwn9> }

Syntax Description


show	show running system information
wwn	show wwn information
test	show wwn information for testing
get_swwn_from_pwwn	show switch wwn from port wwn
wwn0	port wwn
get_pwwn_from_swwn	show port wwn from switch wwn
wwn1	switch wwn
if_index	interface index
i0	Interface index
get_ifindex_from_fwwn	show ifindex from fabric wwn
wwn2	fabric wwn
get_ifindex_from_pwwn	show ifindex from port wwn
wwn3	port wwn
validate_pwwn_given_swwn	validate port wwn for given swwn
wwn4	switch wwn
pwwn	port wwn
wwn5	port wwn
get_all_pwwn_for_slot	show all port wwn for a given slot
i1	Slot number
get_kc_type_given_swwn	show KC type
wwn6	switch wwn
pwwn	port wwn
wwn7	port wwn
get_ifindex_from_pwwn_swwn	show ifindex for given pwwn and swwn
wwn8	switch wwn
pwwn	port wwn
wwn9	port wwn

Command Mode

/exec

show wwn vsan-wwn

Syntax Description


show	Show running system information
wwn	show wwn information
vsan-wwn	Show all user configured vsan wwn

Command Mode

/exec

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)