The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
show callhome
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
Command Mode
/exec
show callhome destination-profile
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
destination-profile |
Show callhome destination profile information |
Command Mode
/exec
show callhome destination-profile profile <s0>
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
destination-profile |
Show callhome destination profile information |
|
profile |
Specify the destination profile |
|
s0 |
Show information for user defined destination profile |
Command Mode
/exec
show callhome destination-profile profile CiscoTAC-1
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
destination-profile |
Show callhome destination profile information |
|
profile |
Specify the destination profile |
|
CiscoTAC-1 |
Show information for CiscoTAC-1 destination profile |
Command Mode
/exec
show callhome destination-profile profile full-txt-destination
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
destination-profile |
Show callhome destination profile information |
|
profile |
Specify the destination profile |
|
full-txt-destination |
Show information for full-txt-destination destination profile |
Command Mode
/exec
show callhome destination-profile profile short-txt-destination
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
destination-profile |
Show callhome destination profile information |
|
profile |
Specify the destination profile |
|
short-txt-destination |
Show information for short-txt-destination destination profile |
Command Mode
/exec
show callhome transport-email
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
transport |
Show callhome transport configuration (email) |
Command Mode
/exec
show callhome transport
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
transport |
Show callhome transport configuration (email and http) |
Command Mode
/exec
show callhome user-def-cmds
Syntax Description
|
show |
Show running system information |
|
callhome |
Show callhome information |
|
user-def-cmds |
Show the cli commands configured for each alert group |
Command Mode
/exec
show cdp { entry { all1 | name <s0> } }
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
entry |
Show CDP entries in database |
|
all1 |
Show all CDP entries in database |
|
name |
Show a specific CDP entry matching a name |
|
s0 |
Command Mode
/exec
show cdp { all | interface <if0> }
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
all |
Show all interfaces in CDP database |
|
interface |
Show CDP parameters for an interface |
|
if0 |
Command Mode
/exec
show cdp global
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
global |
Show CDP global parameters |
Command Mode
/exec
show cdp neighbors [ interface <if> ]
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
neighbors |
Show CDP neighbors |
|
interface |
(Optional) Show CDP neighbors on an interface |
|
if |
(Optional) Specify Interface |
Command Mode
/exec
show cdp neighbors [ interface <if> ] detail
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
neighbors |
Show CDP neighbors |
|
detail |
Show CDP neighbors detailed |
|
interface |
(Optional) Show CDP neighbors on an interface |
|
if |
(Optional) Specify Interface |
Command Mode
/exec
show cdp traffic interface2 <if2>
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
traffic |
Show CDP traffic statistics |
|
interface2 |
Show CDP traffic statistics on an interface |
|
if2 |
Command Mode
/exec
show cdp traffic interface2 all
Syntax Description
|
show |
Show running system information |
|
cdp |
Show Cisco Discovery Protocol information |
|
traffic |
Show CDP traffic statistics |
|
interface2 |
Show CDP traffic statistics on an interface |
|
all |
Display all interface traffic |
Command Mode
/exec
show cfs application [ { name <cfs-dyn-app-name> | sap <i0> } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
application |
Show locally registered applications |
|
name |
(Optional) Show local application information by name |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i0 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show cfs lock [ { name <cfs-dyn-app-name> | sap <i1> } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
lock |
Show state of application's logical/physical locks |
|
name |
(Optional) Application name for which the lock status is required |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show cfs lock [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
lock |
Show state of application's logical/physical locks |
|
name |
(Optional) Application name for which the lock status is required |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
vsan |
(Optional) Show application's locks per vsan |
|
i0 |
(Optional) Vsan Range |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
vsan1 |
(Optional) Show application's locks per vsan |
|
i2 |
(Optional) Vsan Range |
Command Mode
/exec
show cfs merge status [ { name <cfs-dyn-app-name> [ detail ] | sap <i1> [ detail2 ] } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
merge |
Show cfs merge information |
|
status |
Show status of merge |
|
name |
(Optional) Show merge status by name |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
detail |
(Optional) Show merge status by name in detail |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
detail2 |
(Optional) Show merge status by sap in detail |
Command Mode
/exec
show cfs merge status [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
merge |
Show cfs merge information |
|
status |
Show status of merge |
|
name |
(Optional) Show merge status by name |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
vsan |
(Optional) Show merge information based on vsan |
|
i0 |
(Optional) Vsan Range |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
vsan1 |
(Optional) Show merge information based on vsan |
|
i2 |
(Optional) Vsan Range |
Command Mode
/exec
show cfs peers [ { name <cfs-dyn-app-name> | sap <i1> } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
peers |
Show all the peers in the physical fabric |
|
name |
(Optional) Show peers for given application name |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show cfs peers [ { name <cfs-dyn-app-name> [ vsan <i0> ] | sap <i1> [ vsan1 <i2> ] } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
peers |
Show all the peers in the physical fabric |
|
name |
(Optional) Show peers for given application name |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
vsan |
(Optional) Show peers for a specified vsan(s) |
|
i0 |
(Optional) Vsan Range |
|
sap |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
i1 |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
vsan1 |
(Optional) Show peers for a specified vsan(s) |
|
i2 |
(Optional) Vsan Range |
Command Mode
/exec
show cfs regions [ { brief [ region <i0> ] | name <cfs-dyn-app-name> | region1 <i1> } ]
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
regions |
Show all the applications with peers and region information |
|
brief |
(Optional) Show all configured regions and applications(no peers) |
|
region |
(Optional) Show all configured applications(no peers) |
|
i0 |
(Optional) Region Id |
|
name |
(Optional) Show peers and region information for a given application |
|
cfs-dyn-app-name |
(Optional) Registered name of the local application |
|
region1 |
(Optional) Show all configured applications with peers |
|
i1 |
(Optional) Region Id |
Command Mode
/exec
show cfs static peers
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
static |
Show all static peers with status |
|
peers |
Show all configured static peers with status |
Command Mode
/exec
show cfs status
Syntax Description
|
show |
Show running system information |
|
cfs |
CFS Show Command handler |
|
status |
Show current status of CFS |
Command Mode
/exec
show checkpoint <chkpoint_name> [ all ]
Syntax Description
|
show |
Show running system information |
|
checkpoint |
Show configuration rollback checkpoint contents |
|
chkpoint_name |
Checkpoint name |
|
all |
(Optional) Show default config |
Command Mode
/exec
show checkpoint [ all ] [ user | system ]
Syntax Description
|
show |
Show running system information |
|
checkpoint |
Show configuration rollback checkpoints |
|
all |
(Optional) Show default config |
|
user |
(Optional) Show only user configuration rollback checkpoints |
|
system |
(Optional) Show only system configuration rollback checkpoints |
Command Mode
/exec
show checkpoint summary [ user | system ]
Syntax Description
|
show |
Show running system information |
|
checkpoint |
Show configuration rollback checkpoints |
|
summary |
Show configuration rollback checkpoints summary |
|
user |
(Optional) Show only user configuration rollback checkpoints summary |
|
system |
(Optional) Show only system configuration rollback checkpoints summary |
Command Mode
/exec
show class-map [ { [ type qos ] [ <cmap-name> | xxx <color-map-enum-name> ] } | { type queuing [ yyy <cmap-enum-name> | zzz <default-cmap-enum-name> | <cmap-dce-name> | <cmap-name-hque> ] } ]
Syntax Description
|
xxx |
(Optional) xxx |
|
yyy |
(Optional) yyy |
|
zzz |
(Optional) zzz |
|
show |
Show running system information |
|
class-map |
Show class maps |
|
type |
(Optional) Type of the class-map |
|
qos |
(Optional) type qos |
|
queuing |
(Optional) type queuing |
|
cmap-name |
(Optional) class map name |
|
cmap-enum-name |
(Optional) |
|
default-cmap-enum-name |
(Optional) |
|
cmap-dce-name |
(Optional) Queuing class-map name |
|
cmap-name-hque |
(Optional) Hierarchical class-map name |
|
color-map-enum-name |
(Optional) |
Command Mode
/exec
show class-map type control-plane [ <cmap-name> ]
Syntax Description
|
show |
Show running system information |
|
class-map |
Show class maps |
|
type |
Type of the class-map |
|
control-plane |
This is for copp policy |
|
cmap-name |
(Optional) Name of the class-map |
Command Mode
/exec
show class-map type network-qos [ <cmap-name-nq> ]
Syntax Description
|
show |
Show running system information |
|
class-map |
Show class maps |
|
type |
Type of the class-map |
|
cmap-name-nq |
(Optional) Class-map name |
|
network-qos |
type network-qos |
Command Mode
/exec
show cli alias [ name <s0> ]
Syntax Description
|
show |
Show running system information |
|
cli |
Show CLI information |
|
alias |
Display the alias configuration |
|
name |
(Optional) Display a specific alias |
|
s0 |
(Optional) Specify the alias |
Command Mode
/exec
show cli dynamic integers [ <name> ]
Syntax Description
|
show |
Show running system information |
|
cli |
CLI commands |
|
dynamic |
Display current range of dynamic parameters |
|
integers |
Display current range of dynamic integer parameters |
|
name |
(Optional) name of the dynamic parameter |
Command Mode
/exec
show cli dynamic strings [ <name> ]
Syntax Description
|
show |
Show running system information |
|
cli |
CLI commands |
|
dynamic |
Display current range of dynamic parameters |
|
strings |
Display current range of dynamic string parameters |
|
name |
(Optional) name of the dynamic parameter |
Command Mode
/exec
show cli history [ this-mode-only | exec-mode | config-mode ] [ <count> | unformatted ] +
Syntax Description
|
show |
Show running system information |
|
cli |
debug cli |
|
history |
history of cli commands |
|
count |
(Optional) number of lines to display (from end) |
|
unformatted |
(Optional) display just the commands |
|
this-mode-only |
(Optional) display history from current mode only |
|
exec-mode |
(Optional) display history of exec commands only |
|
config-mode |
(Optional) display history of config commands only |
Command Mode
/exec
show cli interface table
Syntax Description
|
show |
show |
|
cli |
cli |
|
interface |
interface |
|
table |
table |
Command Mode
/exec
show cli list [ detail | recurse | <component> | <max-per-cmd> | has-xml-out ] +
Syntax Description
|
show |
Show running system information |
|
cli |
Show CLI information |
|
list |
show |
|
component |
(Optional) component |
|
max-per-cmd |
(Optional) max |
|
has-xml-out |
(Optional) show |
|
recurse |
(Optional) go |
|
detail |
(Optional) formats |
Command Mode
/exec
show cli syntax [ long | recurse ] + [ has-xml-out | has-no-xml-out | is-data-modeled | has-no-data-modeled | has-dme-exempt ] [ roles [ network-admin | network-operator | <roles-mask> ] ]
Syntax Description
|
show |
Show running system information |
|
cli |
Show CLI information |
|
syntax |
show |
|
long |
(Optional) use |
|
recurse |
(Optional) also |
|
has-xml-out |
(Optional) show |
|
has-no-xml-out |
(Optional) show |
|
is-data-modeled |
(Optional) show |
|
has-no-data-modeled |
(Optional) config |
|
has-dme-exempt |
(Optional) config |
|
roles |
(Optional) show |
|
network-admin |
(Optional) show |
|
network-operator |
(Optional) show |
|
roles-mask |
(Optional) show |
Command Mode
/exec
show cli variables
Syntax Description
|
show |
Show running system information |
|
cli |
Show CLI information |
|
variables |
Show CLI variables |
Command Mode
/exec
show clock-interface
Syntax Description
|
clock-interface |
Show clock-interface information |
Command Mode
/exec
show clock [ detail ]
Syntax Description
|
show |
Show running system information |
|
clock |
Display current Date |
|
detail |
(Optional) Display current date and summertime configuration |
Command Mode
/exec
show config-profile [ name <all_conf_profile_name> ]
Syntax Description
|
show |
Show running system information |
|
config-profile |
Show config-profiles |
|
name |
(Optional) config-profile name |
|
all_conf_profile_name |
(Optional) Enter the name of configuration profile |
Command Mode
/exec
show config-profile { applied [ auto | manually ] | non-applied } [ match-name <profile_substring> ]
Syntax Description
|
show |
Show running system information |
|
config-profile |
Show config-profiles |
|
applied |
List of config-profiles that are applied |
|
auto |
(Optional) List of config-profiles that are applied via auto-config |
|
manually |
(Optional) List of all config-profiles which were applied directly from cli |
|
non-applied |
List of config-profiles that are not applied |
|
match-name |
(Optional) List of all config-profiles that have matching sub-string |
Command Mode
/exec
show config-replace log { exec | verify }
Syntax Description
|
show |
Show running system information |
|
config-replace |
Show config-replace |
|
log |
show config-replace log |
|
exec |
show config-replace execution log |
|
verify |
show config-replace verify log |
Command Mode
/exec
show config-replace status
Syntax Description
|
show |
Show running system information |
|
config-replace |
show config-replace |
|
status |
show status of last configure replace operation |
Command Mode
/exec
show configuration { commit list | dual-stage sessions }
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
commit |
commit information |
|
list |
Information about commit-id |
|
dual-stage |
Active dual stage session |
|
sessions |
Users with active configuration sessions |
Command Mode
/exec
show configuration
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
Command Mode
/exec
show configuration commit { changes <conf-commit-id> | <conf-commit-id> | log }
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
commit |
commit information |
|
changes |
difference in commited configs |
|
conf-commit-id |
commit ID |
|
log |
Displays execution logs of last commit |
Command Mode
/exec
show configuration failed [ noerrors ]
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
failed |
Contents of failed configuration |
|
noerrors |
(Optional) Failed items in last commit (exclude error reasons) |
Command Mode
/exec
show configuration file <uri0> [ clear-text ]
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
file |
Displays content of files |
|
uri0 |
Filename to be displayed |
|
clear-text |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show configuration session <s3>
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
|
s3 |
Shows configuration session given a name |
Command Mode
/exec
show configuration session
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
Command Mode
/exec
show configuration session global-info
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
|
global-info |
Show configuration sessions global-info |
Command Mode
/exec
show configuration session status [ <s3> ]
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
|
status |
Show configuration session-mgr status |
|
s3 |
(Optional) Shows configuration session status given a name |
Command Mode
/exec
show configuration session summary
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
|
summary |
Show summary of the active configuration sessions |
Command Mode
/exec
show configuration session <s3> vsh
Syntax Description
|
show |
Show running system information |
|
configuration |
Show information about configuration sessions |
|
session |
Show active configuration sessions |
|
s3 |
Shows configuration session given a name |
|
vsh |
Command Mode
/exec
show consistency-checker copp
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
copp |
Verify copp programming from software context |
Command Mode
/exec
show consistency-checker copp extended module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
copp |
Verify copp programming from software context |
|
extended |
extended |
|
module |
Limit display to this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker dme interfaces
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
dme |
DME (ObjectStore) |
|
interfaces |
interfaces oper data |
Command Mode
/exec
show consistency-checker dvif-sharing vlan <vlanid> [ group <group_ip> | destination-mac <dst_mac> ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
dvif-sharing |
Verifies dvif-sharing feature |
|
vlan |
Consistency check for vlan flood |
|
vlanid |
Enter vlan id |
|
group |
(Optional) Consistency check for a mcast group |
|
group_ip |
(Optional) Multicast IP address of single group to display |
|
destination-mac |
(Optional) Consistency check for a destination-mac |
|
dst_mac |
(Optional) Multicast Destination mac Address for Vlan to display |
Command Mode
/exec
show consistency-checker egress-xlate private-vlan <vlan>
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
egress-xlate |
Check PVLAN egress-xlate |
|
private-vlan |
Verifies private-vlan egress-xlate in the hardware |
|
vlan |
Enter private-vlan id |
Command Mode
/exec
show consistency-checker ehm interface { <intf> | all }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
ehm |
Show EHM Info |
|
interface |
Show interface status and information |
|
intf |
Virtual Interface |
|
all |
Display All Interfaces |
Command Mode
/exec
show consistency-checker epbr policy { <policyName> | all } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
epbr |
Enhanced Policy-Based Redirect |
|
policy |
Policy |
|
policyName |
EPBR policy name |
|
all |
Check all EPBR policies |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker fcoe [ { interface <if1> [ { exclude ping } ] } | { npv [ server-interface <svr_if1> external-interface <ext_if1> ] } | { hw-table { pif | vif | ucpccfg | vsan | acl | fib [ flogi | domain [ local | remote ] ] | fcf | zone | mac } } | { [ exclude ] ping } | { drop [ ingress | egress ] } | qos ] [ verbose [ detail ] ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
fcoe |
FCoE manager |
|
interface |
(Optional) Interface Test |
|
if1 |
(Optional) Interface name |
|
npv |
(Optional) NPV server to external interface pinning test |
|
server-interface |
(Optional) Server Interface Name |
|
svr_if1 |
(Optional) Server Interface name |
|
external-interface |
(Optional) External Interface Name |
|
ext_if1 |
(Optional) External Interface name |
|
hw-table |
(Optional) Consistency checker for Hardware Tables |
|
pif |
(Optional) PIF Table Test |
|
vif |
(Optional) VIF Table Test |
|
ucpccfg |
(Optional) Port-channel Program Table Test |
|
vsan |
(Optional) VSAN VLAN related tables |
|
acl |
(Optional) ACL Test |
|
fib |
(Optional) FIB Test |
|
flogi |
(Optional) FIB Test for FLOGIs |
|
domain |
(Optional) FIB Test for domains |
|
local |
(Optional) FIB Test for local domains |
|
remote |
(Optional) FIB Test for remote domains |
|
fcf |
(Optional) FCF Test |
|
zone |
(Optional) ZONE Test |
|
mac |
(Optional) MAC Table Test |
|
exclude |
(Optional) Exclude given test |
|
ping |
(Optional) FCPING Test |
|
drop |
(Optional) Hardware drops |
|
ingress |
(Optional) Ingress Drop Test |
|
egress |
(Optional) Egress Drop Test |
|
qos |
(Optional) QOS Test |
|
verbose |
(Optional) To get debugs |
|
detail |
(Optional) To get detailed debugs |
Command Mode
/exec
show consistency-checker fex-interfaces fabric <ch-id> [ membership { vlan <vlan-id> } | stp-state { vlan <vlan-id> } ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
fex-interfaces |
Compares software and hardware state of fex interfaces |
|
fabric |
Limits display for fabric port-channel |
|
ch-id |
Port-Channel name |
|
membership |
(Optional) Check various memberships |
|
stp-state |
(Optional) Verify spanning tree state in the hardware |
|
vlan |
(Optional) VLAN |
|
vlan-id |
(Optional) vlan number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker fex-interfaces fabric <fabric-po> egress-xlate private-vlan <vlan> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
fex-interfaces |
Compares software and hardware state of fex interfaces |
|
fabric |
Fex Fabric poort-channel |
|
fabric-po |
Port-Channel name |
|
egress-xlate |
Check PVLAN egress-xlate |
|
private-vlan |
Verifies private-vlan egress-xlate in the hardware |
|
vlan |
Enter private-vlan id |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker fex-interfaces { fex <id> | interface <ifid> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
fex-interfaces |
Compares software and hardware state of fex interfaces |
|
fex |
Limit display to interfaces on this fex |
|
id |
Enter module number |
|
interface |
Limit display to FEX interface |
|
ifid |
FEX interface name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker forwarding [ ip | ipv4 ] [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ]
Syntax Description
|
show |
show |
|
consistency-checker |
Consistency Checker |
|
forwarding |
Display Forwarding Information |
|
ip |
(Optional) ipv4 |
|
ipv4 |
(Optional) ipv4 |
|
unicast |
(Optional) unicast |
|
suppress-transient |
(Optional) Supress Transient state |
|
vrf |
(Optional) check routes for a specific VRF |
|
vrf-name |
(Optional) VRF name |
|
module |
(Optional) check routes for a specific module |
|
module |
(Optional) module number |
|
all_modules |
(Optional) all module's |
|
all_vrfs |
(Optional) all vrf's |
Command Mode
/exec
show consistency-checker forwarding ipv6 [ unicast ] [ suppress-transient ] [ vrf { <vrf-name> | all_vrfs } ] [ module { <module> | all_modules } ]
Syntax Description
|
show |
show |
|
consistency-checker |
Consistency Checker |
|
forwarding |
Display Forwarding Information |
|
ipv6 |
ipv6 |
|
unicast |
(Optional) unicast |
|
suppress-transient |
(Optional) Supress Transient state |
|
vrf |
(Optional) check routes for a specific VRF |
|
vrf-name |
(Optional) VRF name |
|
module |
(Optional) check routes for a specific module |
|
module |
(Optional) module number |
|
all_modules |
(Optional) all module's |
|
all_vrfs |
(Optional) all vrf's |
Command Mode
/exec
show consistency-checker forwarding single-route { ipv4 | ipv6 } <ip-prefix> vrf { <vrf-name> | <vrf-known-name> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
forwarding |
Display Forwarding Information |
|
single-route |
Run the consistency checker for a single route |
|
ipv4 |
IPv4 address |
|
ipv6 |
IPv6 address |
|
ip-prefix |
Specify an IP prefix/mask |
|
vrf |
check routes for a specific VRF |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker fsync [ debug-logs ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
fsync |
Do consistency check for frequnecy synchronization |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker gwmacdb [ interface { <int-id> | <ch-id> | <vlan-id> } ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
gwmacdb |
Check gateway mac table |
|
interface |
(Optional) interface |
|
int-id |
(Optional) Physical or Logical interface |
|
ch-id |
(Optional) Port-Channel name |
|
vlan-id |
(Optional) SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker hardware-telemetry inband { brief | detail }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
hardware-telemetry |
feature hardware-telemetry |
|
inband |
inband-telemetry version |
|
brief |
Show consistency checker structured output in brief |
|
detail |
Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker hardware-telemetry postcard { brief | detail }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
hardware-telemetry |
feature hardware-telemetry |
|
postcard |
postcard-telemetry version |
|
brief |
Show consistency checker structured output in brief |
|
detail |
Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker itd { <svcName> | all } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
itd |
Intelligent traffic director |
|
svcName |
ITD service name |
|
all |
check all ITD services |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker itd ingress interface <intf> source { <src-address> | <src-ipv6-address> } destination { <dst-address> | <dst-ipv6-address> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
itd |
Intelligent traffic director |
|
ingress |
ingress direction |
|
interface |
ITD ingress interface |
|
intf |
|
|
source |
Do consistency check for source |
|
src-address |
source IP address |
|
destination |
Do consistency check for destination |
|
dst-address |
destination IP address |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker itd ingress vlan <vlanId> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
itd |
Intelligent traffic director |
|
ingress |
ingress direction |
|
vlan |
vlan ID |
|
vlanId |
Enter vlan id |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker kim
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
kim |
Kernel Interface |
Command Mode
/exec
show consistency-checker kim { interface <ifid> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
kim |
kernel interface |
|
interface |
Limit display to interface |
|
ifid |
Interface |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l2-tahoe mac-address <mac-addr> [ module <module> ] [ unit <unit> ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2-tahoe |
Verify l2 mac programming in the hardware |
|
mac-address |
MAC address |
|
mac-addr |
address |
|
module |
(Optional) Module to run the consistency-checker on |
|
module |
(Optional) Module number |
|
unit |
(Optional) Unit to run the consistency checker on |
|
unit |
(Optional) Enter Unit Number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l2-tahoe sub-interface { <if_name> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2-tahoe |
Verify l2 sub-interface programming in the hardware |
|
sub-interface |
sub-interface |
|
if_name |
Physical or Logical interface |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l2-tahoe sub-interface vlan <vlan-id>
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2-tahoe |
Verify l2 sub-interface programming in the hardware |
|
sub-interface |
sub-interface |
|
vlan |
Do consistency check for vlan |
|
vlan-id |
vlan number |
Command Mode
/exec
show consistency-checker l2-tahoe switchport { interface { <if_name> | all } | module { <module> | all } } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2-tahoe |
Verify l2 mac programming in the hardware |
|
switchport |
Switchport Interface |
|
interface |
interface |
|
if_name |
Physical or Logical interface |
|
all |
All switchport interfaces |
|
module |
Module to run the consistency-checker on |
|
module |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker { l2-tahoe | l2-mtc } module <module> [ unit <unit> ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2-tahoe |
Verify l2 mac programming in the hardware |
|
l2-mtc |
Verify l2 mac programming in the hardware |
|
module |
Module to run the consistency-checker on |
|
module |
Enter module number |
|
unit |
(Optional) Unit to run the consistency checker on |
|
unit |
(Optional) Enter unit number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l2 multicast group { <grp-address> | <grp-ipv6-address> } source { <src-address> | <src-ipv6-address> } vlan <vlan-id> [ debug-logs | display-cc-time ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2 |
Verify l2 mac programming in the hardware |
|
multicast |
multicast related information |
|
group |
Do consistency check for group |
|
grp-address |
group IP address |
|
source |
Do consistency check for source |
|
src-address |
source IP address |
|
vlan |
Do consistency check for vlan |
|
vlan-id |
vlan number |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
display-cc-time |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l2 multicast mac <mac-address> vlan <vlan-id> [ debug-logs ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l2 |
Verify l2 mac programming in the hardware |
|
multicast |
multicast related information |
|
mac |
Do consistency check for multicast mac address lookup |
|
mac-address |
mac address |
|
vlan |
Do consistency check for vlan |
|
vlan-id |
vlan number |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l3-interface { all | module <moduleid> [ brief | detail ] | interface { <ifid> | <ch-id> | <vlan-id> } [ brief | detail ] }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l3-interface |
Compares software and hardware properties of L3 interfaces |
|
all |
Run on all modules on the switch |
|
module |
Limit display to interfaces on module |
|
moduleid |
Module number |
|
interface |
Limit display to interface |
|
ifid |
Interface name |
|
ch-id |
Port-Channel name |
|
vlan-id |
SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker l3 multicast [ overlay-only ] group { <grp-address> [ <mask> ] | <gprefix> | <grp-ipv6-address> } source { <src-address> | <src-ipv6-address> } vrf { <vrf-name> | <vrf-known-name> } [ debug-logs | display-cc-time ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
l3 |
l3 consistency |
|
multicast |
multicast related information |
|
overlay-only |
(Optional) perform cc for trm overlay info only |
|
group |
Do consistency check for group |
|
grp-address |
group IP address |
|
mask |
(Optional) mask for group ip address |
|
gprefix |
IPv4 Multicast Group Prefix |
|
source |
Do consistency check for source |
|
src-address |
source IP address |
|
vrf |
Do consistancy check for vrf |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
display-cc-time |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker link-state fabric-ieth { [ module <module> ] } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
link-state |
Compares software and hardware link state of interfaces |
|
fabric-ieth |
Internal Fabric ports |
|
module |
(Optional) Limit display to interfaces on module |
|
module |
(Optional) Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker link-state { module <module> | interface <ifid> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
link-state |
Compares software and hardware link state of interfaces |
|
module |
Limit display to interfaces on module |
|
module |
Module number |
|
interface |
Limit display to interface |
|
ifid |
Interface name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker macsec interface { <if_name> | all } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
macsec |
Check macsec |
|
interface |
interface info |
|
if_name |
Physical or Logical interface |
|
all |
All switchport interfaces |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker membership port-channels [ interface <ch-id> ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
membership |
Check various memberships |
|
port-channels |
Verifies port channel membership in the hardware |
|
interface |
(Optional) Port-channel number |
|
ch-id |
(Optional) Port-Channel name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker membership vlan <vlanid> [ [ interface [ <intf-id> | <ch-id> ] ] | [ private-vlan [ interface [ <int-id> | <ch-id> ] ] ] ] [ native-vlan ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
vlan |
Verifies vlan membership in the hardware |
|
vlanid |
Enter vlan id |
|
consistency-checker |
Consistency Checker |
|
membership |
Check various memberships |
|
interface |
(Optional) Interface |
|
intf-id |
(Optional) Interface |
|
ch-id |
(Optional) Port-Channel name |
|
private-vlan |
(Optional) Check private-vlan primary vlan |
|
interface |
(Optional) Interface |
|
int-id |
(Optional) Interface name |
|
ch-id |
(Optional) Port-Channel name |
|
native-vlan |
(Optional) Check for native vlans |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker monitor session { <session-id> | all } [ debug ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
monitor |
Configure Ethernet SPAN sessions |
|
session |
Configure session preferences |
|
session-id |
Enter monitor session id |
|
all |
All sessions |
|
debug |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
Command Mode
/exec
show consistency-checker multicast nlb cluster-ip <ip-address> vrf { <vrf-name> | <vrf-known-name> } [ debug-logs ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
multicast |
multicast related information |
|
nlb |
Do consistency check for Multicast NLB |
|
cluster-ip |
Cluster virtual unicast IP address |
|
ip-address |
Cluster IP address |
|
vrf |
Do consistancy check for vrf |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker multicast vlan <vlanid> [ group <group_ip> | destination-mac <dst_mac> ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
multicast |
Verify Multicast |
|
vlan |
Verifies vlan flood sharing |
|
vlanid |
Enter vlan id |
|
group |
(Optional) Do consistency check for a group |
|
group_ip |
(Optional) Multicast IP address of single group to display |
|
destination-mac |
(Optional) Do consistency check for a destination-mac |
|
dst_mac |
(Optional) Multicast Destination mac Address for Vlan to display |
Command Mode
/exec
show consistency-checker niv-datapath interface [ <intf> | veth-all ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
niv-datapath |
Verify NIV Datapath for a given interface |
|
interface |
Show interface status and information |
|
intf |
(Optional) Virtual interface |
|
veth-all |
(Optional) Run consistency-checker for all Veths |
Command Mode
/exec
show consistency-checker pacl extended ingress ip interface { <int-id> | <ch-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ip |
ip protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended ingress ip module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ip |
ip protocol |
|
module |
Limit display to L2 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended ingress ipv6 module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ipv6 |
ipv6 protocol |
|
module |
Limit display to L2 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended ingress ipv6 interface { <int-id> | <ch-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ipv6 |
ipv6 protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended ingress mac interface { <int-id> | <ch-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
mac |
ethernet protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended ingress mac module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
mac |
ethernet protocol |
|
module |
Limit display to L2 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl extended module { all | <module-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
extended |
extended |
|
module |
Limit display to L2 interfaces on this module |
|
all |
To run cc across all the modules |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pacl module <module>
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
module |
Limit display to L2 interfaces on this module |
|
module |
Enter module number |
Command Mode
/exec
show consistency-checker pacl port-channels [ interface <ch-id> ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pacl |
Verify pacl programming in the hardware |
|
port-channels |
Verifies port channel pacl programming in the hardware |
|
interface |
(Optional) Port-channel number |
|
ch-id |
(Optional) Port-Channel name |
Command Mode
/exec
show consistency-checker port-state [ { module <module> | interface <ifid> } ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
port-state |
Validates SI, MTU and IPG Settings |
|
module |
(Optional) Limit display to interfaces on module |
|
module |
(Optional) Enter module number |
|
interface |
(Optional) Limit display to interface |
|
ifid |
(Optional) Interface name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker port-state fabric-ieth [ module <module> [ ieth-port <ieth-port> ] ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
port-state |
Validates SI, FEC and MTU Settings |
|
fabric-ieth |
Internal Fabric ports |
|
module |
(Optional) Limit display to interfaces on module |
|
module |
(Optional) Enter module number |
|
ieth-port |
(Optional) Enter ieth-port number |
|
ieth-port |
(Optional) Enter ieth-port number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker pv-mapping
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pv-mapping |
pv-mapping consistency checker |
Command Mode
/exec
show consistency-checker pv-mapping interface { <int-id> | <ch-id> }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
pv-mapping |
pv-mapping consistency checker |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
Command Mode
/exec
show consistency-checker qinq [ interface [ <int-id> | <ch-id> ] ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
qinq |
QinQ consistency checker |
|
interface |
(Optional) Interface |
|
int-id |
(Optional) Eth Interface |
|
ch-id |
(Optional) Port-Channel |
Command Mode
/exec
show consistency-checker racl extended egress ipv6 module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
egress |
egress direction |
|
ipv6 |
ipv6 protocol |
|
module |
Limit display to L3 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended egress ip module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
egress |
egress direction |
|
ip |
ip protocol |
|
module |
Limit display to L3 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended egress ip interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
egress |
egress direction |
|
ip |
ip protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
vlan-id |
SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended egress ipv6 interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
egress |
egress direction |
|
ipv6 |
ipv6 protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
vlan-id |
SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended ingress ip interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ip |
ip protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
vlan-id |
SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended ingress ip module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ip |
ip protocol |
|
module |
Limit display to L3 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended ingress ipv6 module <module-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ipv6 |
ipv6 protocol |
|
module |
Limit display to L3 interfaces on this module |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended ingress ipv6 interface { <int-id> | <ch-id> | <vlan-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ipv6 |
ipv6 protocol |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
|
vlan-id |
SVI VLAN |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl extended module { all | <module-id> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
extended |
extended |
|
module |
Limit display to L3 interfaces on this module |
|
all |
To run CC across all the modules |
|
module-id |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker racl module <module>
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
module |
Limit display to L3 interfaces on this module |
|
module |
Enter module number |
Command Mode
/exec
show consistency-checker racl port-channels [ interface <ch-id> ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
port-channels |
Verifies port channel racl programming in the hardware |
|
interface |
(Optional) Port-channel number |
|
ch-id |
(Optional) Port-Channel name |
Command Mode
/exec
show consistency-checker racl svi interface <vlan-id>
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
racl |
Verify racl programming in the hardware |
|
svi |
Verifies SVI racl programming in the hardware |
|
interface |
SVI number |
|
vlan-id |
SVI VLAN |
Command Mode
/exec
show consistency-checker segment-routing mpls { ip <ip-address> mask <ip-mask> vrf <vrf-name> | label <label> } [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
segment-routing |
Segment-routing |
|
mpls |
MPLS Information |
|
ip |
IP Information |
|
ip-address |
IP Address |
|
mask |
Mask Information |
|
ip-mask |
Mask Length |
|
vrf |
VRF Information |
|
vrf-name |
VRF Name |
|
label |
Label Information |
|
label |
Label Name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker selective-qinq
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
selective-qinq |
Selective QinQ consistency checker |
Command Mode
/exec
show consistency-checker selective-qinq interface { <int-id> | <ch-id> }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
selective-qinq |
Selective QinQ consistency checker |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
Command Mode
/exec
show consistency-checker sflow [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
sflow |
Compares software and hardware sflow details |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker storm-control
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
storm-control |
Storm control consistency checker |
Command Mode
/exec
show consistency-checker stp-state vlan <vlan> [ interface <int-id> ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
vlan |
Verifies spanning tree state in the hardware for all interfaces in the vlan |
|
vlan |
Enter vlan id |
|
interface |
(Optional) Interface |
|
int-id |
(Optional) Interface |
|
consistency-checker |
Consistency Checker |
|
stp-state |
Verify spanning tree state in the hardware |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker tap-aggregation qinq
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
tap-aggregation |
Tap Aggregation Feature |
|
qinq |
QinQ consistency checker |
Command Mode
/exec
show consistency-checker tap-aggregation qinq interface { <int-id> | <ch-id> }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
tap-aggregation |
Tap Aggregation Feature |
|
qinq |
QinQ consistency checker |
|
interface |
Interface |
|
int-id |
Eth Interface |
|
ch-id |
Port-Channel |
Command Mode
/exec
show consistency-checker transceiver [ { module <module> | interface <ifid> } ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
transceiver |
Validates transceiver Settings |
|
module |
(Optional) Limit display to interfaces on module |
|
module |
(Optional) Enter module number |
|
interface |
(Optional) Limit display to interface |
|
ifid |
(Optional) Interface name |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vacl
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vacl |
Verify vacl programming in the hardware |
Command Mode
/exec
show consistency-checker vacl extended ingress ipv6 vlan <vlan-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vacl |
Verify vacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ipv6 |
ipv6 protocol |
|
vlan |
VLAN |
|
vlan-id |
vlan number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vacl extended ingress ip vlan <vlan-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vacl |
Verify vacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
ip |
ip protocol |
|
vlan |
VLAN |
|
vlan-id |
vlan number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vacl extended ingress mac vlan <vlan-id> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vacl |
Verify vacl programming in the hardware |
|
extended |
extended |
|
ingress |
ingress direction |
|
mac |
ethernet protocol |
|
vlan |
VLAN |
|
vlan-id |
vlan number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vpc [ source-interface [ <int-id> | <ch-id> ] ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vpc |
vPC related information |
|
source-interface |
(Optional) Source vPC member |
|
int-id |
(Optional) Eth Interface |
|
ch-id |
(Optional) Port-Channel |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vpgrouping interface { <intf> | all }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vpgrouping |
Show VP Grouping Info |
|
interface |
Show interface status and information |
|
intf |
Physical or Logical Interface |
|
all |
Display All Interfaces |
Command Mode
/exec
show consistency-checker vxlan config-check [ verbose-mode ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
config-check |
Check the inconsistencies in the config |
|
verbose-mode |
(Optional) config-check verbose |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan infra [ verbose-mode ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
vxlan |
VxLAN consistency checker |
|
consistency-checker |
Consistency Checker |
|
infra |
infra |
|
verbose-mode |
(Optional) detailed CC output |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan l2 mac-address <mac-addr> module <module> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
l2 |
l2 |
|
mac-address |
MAC address |
|
mac-addr |
address |
|
module |
Module to run the consistency-checker on |
|
module |
Module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan l2 module <module> [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
l2 |
Check L2 inconsistencies |
|
module |
Module to run the consistency-checker on |
|
module |
Enter module number |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan l2pt
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
l2pt |
L2pt consistency checker |
Command Mode
/exec
show consistency-checker vxlan l3 single-route { ipv4 | ipv6 } <ip-prefix> vrf { <vrf-name> | <vrf-known-name> } [ debug-logs ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
l3 |
l3 |
|
single-route |
Run the consistency checker for a single route |
|
ipv4 |
IPv4 address |
|
ipv6 |
IPv6 address |
|
ip-prefix |
Overlay L3 Route IP Address in prefix/mask format |
|
vrf |
Do consistancy check for vrf |
|
vrf-name |
VRF name |
|
vrf-known-name |
Known VRF name |
|
debug-logs |
THIS KEYWORD OR VARIABLE IS NOT SUPPORTED |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan l3 vrf { <vrf-name> | all } { start-scan | report }
Syntax Description
|
show |
Show running system information |
|
vxlan |
VxLAN consistency checker |
|
consistency-checker |
Consistency Checker |
|
l3 |
l3 |
|
vrf |
VRF |
|
vrf-name |
vrf name |
|
all |
All VRFs |
|
start-scan |
Start Route CC |
|
report |
Show Route CC report |
Command Mode
/exec
show consistency-checker vxlan mh mac-addresses [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
mh |
VxLAN BGP EVPN Multi Homing CC commands |
|
mac-addresses |
Check mac address consistency between L2RIB and L2FM |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan mh pathlist [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
mh |
VxLAN BGP EVPN Multi Homing CC commands |
|
pathlist |
Check Vxlan BGP EVPN MH Control plane and resultant pathlists consistency |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan pv
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
pv |
PV consistency checker |
Command Mode
/exec
show consistency-checker vxlan pv interface { <int-id> | <ch-id> }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
pv |
PV consistency checker |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
Command Mode
/exec
show consistency-checker vxlan qinq-qinvni
Syntax Description
|
show |
Show running system information |
|
vxlan |
VxLAN consistency checker |
|
consistency-checker |
Consistency Checker |
|
qinq-qinvni |
QinQ consistency checker |
Command Mode
/exec
show consistency-checker vxlan qinvni
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
qinvni |
QinVNI consistency checker |
Command Mode
/exec
show consistency-checker vxlan selective-qinvni
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
selective-qinvni |
Selective QinVNI consistency checker |
Command Mode
/exec
show consistency-checker vxlan selective-qinvni interface { <int-id> | <ch-id> }
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
selective-qinvni |
Selective QinVNI consistency checker |
|
interface |
Interface |
|
int-id |
Interface |
|
ch-id |
Port-Channel name |
Command Mode
/exec
show consistency-checker vxlan vlan { <vlanid> | all } [ verbose-mode ] [ brief | detail ]
Syntax Description
|
show |
Show running system information |
|
vxlan |
VxLAN consistency checker |
|
vlan |
Verifies flood list programming for vxlan vlans |
|
consistency-checker |
Consistency Checker |
|
vlanid |
Enter vlan id |
|
all |
Check CC for all vxlans |
|
verbose-mode |
(Optional) detailed CC output |
|
brief |
(Optional) Show consistency checker structured output in brief |
|
detail |
(Optional) Show consistency checker structured output in detail |
Command Mode
/exec
show consistency-checker vxlan xconnect
Syntax Description
|
show |
Show running system information |
|
consistency-checker |
Consistency Checker |
|
vxlan |
VxLAN consistency checker |
|
xconnect |
Cross-Connect consistency checker |
Command Mode
/exec
show controller <ctrl-id> accounting log
Syntax Description
|
show |
Show running system information |
|
controller |
Controller command |
|
ctrl-id |
Controller id value |
|
accounting |
Accounting |
|
log |
Show log information |
Command Mode
/exec
show copp diff profile <profile_type> [ prior-ver ] profile2 <profile_type2>
Syntax Description
|
show |
Show running system information |
|
copp |
Control-Plane Policing |
|
diff |
Difference between CoPP Profiles |
|
profile |
CoPP Profile |
|
profile_type |
CoPP Profile Types |
|
prior-ver |
(Optional) Previous Configured Version |
|
profile2 |
CoPP Profile |
|
profile_type2 |
CoPP Profile Types |
Command Mode
/exec
show copp profile { strict | moderate | lenient | dense }
Syntax Description
|
show |
Show running system information |
|
copp |
Control-Plane Policing |
|
profile |
CoPP Profile |
|
strict |
display strict profile |
|
moderate |
display moderate profile |
|
lenient |
display lenient profile |
|
dense |
display dense profile |
Command Mode
/exec
show copp status
Syntax Description
|
show |
Show running system information |
|
copp |
Control-Plane Policing |
|
status |
Show the internal status of CoPP |
Command Mode
/exec
show copyright
Syntax Description
|
show |
Show running system information |
|
copyright |
Copyright information |
Command Mode
/exec
show cores [ vdc-all | { vdc [ <e-vdc2> | <vdc-id> ] } ]
Syntax Description
|
show |
Show running system information |
|
cores |
show all core dumps for the current vdc |
|
vdc-all |
(Optional) show core dumps from all vdcs |
|
vdc |
(Optional) show all core dumps for the vdc |
Command Mode
/exec
show crypto ca certificates
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
ca |
show trustpoint configuration |
|
certificates |
show various certificates |
Command Mode
/exec
show crypto ca certificates <s0>
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
ca |
show trustpoint configuration |
|
certificates |
show various certificates |
|
s0 |
trustpoint label |
Command Mode
/exec
show crypto ca certstore
Syntax Description
|
show |
Show running system information |
|
crypto |
Show crypto configuration |
|
ca |
show crypto ca configuration |
|
certstore |
Show the configured certstore |
Command Mode
/exec
show crypto ca crl <s0>
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
ca |
show trustpoint configuration |
|
crl |
show CRL |
|
s0 |
trustpoint label |
Command Mode
/exec
show crypto ca remote-certstore
Syntax Description
|
show |
Show running system information |
|
crypto |
Show crypto configuration |
|
ca |
show crypto ca configuration |
|
remote-certstore |
Show remote certstore configuration |
Command Mode
/exec
show crypto ca trustpoints
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
ca |
show trustpoint configuration |
|
trustpoints |
show trustpoint configuration |
Command Mode
/exec
show crypto ca trustpool
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto information |
|
ca |
show trustpool data |
|
trustpool |
trustpool contents |
Command Mode
/exec
show crypto ca trustpool last download status
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto information |
|
ca |
show trustpool data |
|
trustpool |
trustpool data |
|
last |
last trustpool download status |
|
download |
download of trustpool |
|
status |
download status |
Command Mode
/exec
show crypto ca trustpool policy
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto information |
|
ca |
show Certificate authority related config |
|
trustpool |
show trustpool policy |
|
policy |
trustpool configuration |
Command Mode
/exec
show crypto certificatemap
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
certificatemap |
show certificatemap filters |
Command Mode
/exec
show crypto key mypubkey ecc
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
key |
show key configuration |
|
mypubkey |
show my public keys configuration |
|
ecc |
show my ecc public keys configuration |
Command Mode
/exec
show crypto key mypubkey rsa
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
key |
show key configuration |
|
mypubkey |
show my public keys configuration |
|
rsa |
show my rsa public keys configuration |
Command Mode
/exec
show crypto ssh-auth-map
Syntax Description
|
show |
Show running system information |
|
crypto |
show crypto configuration |
|
ssh-auth-map |
show mapping filters applied for ssh authentication |
Command Mode
/exec
show cts
Syntax Description
|
cts |
Show CTS global configuration |
Command Mode
/exec
show current
Syntax Description
|
show |
Display region configurations |
|
current |
Display mst configuration currently used |
Command Mode
/exec/configure/spanning-tree/mst/configuration
Feedback