System Management Configuration Guide, Cisco Catalyst IE3x00 Rugged, IE3400 Heavy Duty, and ESS3300 Series Switches

PDF

System Management Configuration Guide, Cisco Catalyst IE3x00 Rugged, IE3400 Heavy Duty, and ESS3300 Series Switches

Configure an FPGA profile

Updated: June 26, 2026

Want to summarize with AI?

Log in

Activates a specific FPGA profile on the switch to enable required feature sets. This procedure requires a system reload to apply the changes.

Configure and activate the required field-programmable gate array (FPGA) profile on the switch. The selected profile becomes active after the switch reloads.

Follow these steps to configure the FPGA Profile:

Procedure

1.

(Optional) Use the show platform fpga-profile command to display the currently active FPGA profile and the profile that will become active after the next reload.

Example:

Switch# show platform fpga-profile active
Active FPGA profile       : CTS-IPv6
Active feature set        : CTS IPv4 and IPv6 SGT, VRF, SGACL Logging

FPGA profile upon reload  : CTS-IPv6
Feature set upon reload   : CTS IPv4 and IPv6 SGT, VRF, SGACL Logging
2.

Use the fpga-profile activate { cts-ipv6 | default | redundancy } command to select the FPGA profile to activate after the next reload.

  • ctc-ipv6: Activates the profile that supports CTS IPv4 and IPv6 SGT with VRF and SGACL logging.
  • default: Activates the profile that supports CTS IPv4 SGT with VRF and SGACL logging, PRP, and DLR.
  • redundancy: Activates the profile that supports PRP and DLR.

Example:

Switch# fpga-profile activate redundancy
3.

Use the reload command to reload the switch and activate the selected FPGA profile.

Example:

Switch# reload