mac address-table notification

To configure a log message notification of MAC address table events, use the mac address-table notification command. To disable log message notifications, use the no form of this command.

mac address-table notification {mac-move | threshold [limit percentage interval seconds]}

no mac address-table notification {mac-move | threshold}

Syntax Description

mac-move

Sends a notification message if the MAC address is moved.

threshold

Sends a notification message if the MAC address table threshold is exceeded.

limit percentage

(Optional) Specifies the percentage limit (1 to 100) beyond which threshold notifications are enabled.

interval seconds

(Optional) Specifies the minimum time in seconds (10 to 10000) between two notifications.


Command Default

None

Command Modes

Global configuration mode

Command History

Release
Modification

4.0(0)N1(1a)

This command was introduced.

4.2(1)N1(1)

The command syntax is changed to mac address-table notification.


Examples

This example shows how to configure a log message notification when the threshold exceeds 45 percent, restricting the update interval to once every 1024 seconds:

switch(config)# mac address-table notification threshold limit 45 interval 1024  

Related Commands

Command
Description

show mac address-table

Displays information about the MAC address table.