Access Points Memory Information

Access point memory information

Access point memory information is a feature that:

  • allows viewing the memory type of an access point (AP),

  • provides details about the CPU type of the AP, and

  • displays the memory size per AP after single sign-on authentication.

With the introduction of the Access Point Memory Information feature, APs share memory information with the controller during the join phase. This facilitates enhanced network management and can aid in troubleshooting by providing detailed hardware specifications.

Verify access point memory information

To verify the memory information of a specified AP, including the CPU type, memory type and memory size, use thia command: 

Device# show ap name AP-NAME  config general 
Cisco AP Name   : AP-NAME
=================================================
Cisco AP Identifier                             : 00XX.f1XX.e0XX
Country Code                                    : Multiple Countries : FR,IN,US
Regulatory Domain Allowed by Country            : 802.11bg:-AE   802.11a:-ABDEN
AP Country Code                                 : US  - United States
AP Regulatory Domain
  802.11bg                                      : -A
  802.11a                                       : -B
.
.
.
CPU Type                                        : ARMv7 Processor rev 1 (v7l)
Memory Type                                     : DDR4
Memory Size                                     : 1028096 KB
.
.
.