Cisco UCS X10c Pass Through Controller for E3.S Installation and Service Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 7, 2025

Technical Specifications

This chapter contains the following topics:

E3.S Drive Specifications

Physical Specifications


Specification	Value
Height	2.99 inches (76 mm)
Width	0.295 inches (7.5 mm)
Depth	4.94inches (125.5 mm)
Weight	The weight depends on the components installed. Drive weight: 0.26 lb (0.12 kg)

Environmental Specifications

The Cisco UCS X10c Front Mezzanine E3.S module installs into a supported compute node. Therefore, the E3.S module itself inherits the environmental and power specifications from the compute node that is hosting the module.

Front Mezzanine Module Specifications

Physical Specifications


Specification	Value
Height	1.76 inches (44.70 mm)
Width	11.28 inches (286.51 mm)
Depth	8.11 inches (205.99 mm)
Weight	The weight depends on the components installed. Minimally configured compute node weight: 1.96 lb (0.89 kg) Fully configured compute node weight: 3.86 lb (1.75 kg)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)