Provides reference information on migration prerequisites, compatibility, feature changes, and best practices for moving from Cloud-Pro to Cloud.
Overview
For organizations using Cisco SD-WAN Cloud-Pro with a dedicated fabric and fewer than 800 devices, migrating to Cisco SD-WAN Cloud simplifies operations, reduces daily network management workloads, and ensures compliance with Cisco Catalyst SD-WAN controller policy.
If you do not choose to migrate, the purchase of control component SKUs or a management add-on is required for a dedicated Cisco SD-WAN Cloud-Pro fabric.
Migration process
Eligible customers are contacted to confirm eligibility and provide the necessary information to complete the migration.
Alternatively, you can open a case with the Technical Assistance Center (TAC) to request migration by the Cloud Operations team.
After you provide the required information, a maintenance window is scheduled within 48 hours. Migration duration depends on the fabric device count and can take up to 6 hours (360 minutes).
The Cloud Operations team performs the migration remotely. Any issues that prevent successful migration are resolved and you are contacted as needed.
The network's data plane remains minimally affected because the control connection automatically re-establishes after migration.
Key feature and compatibility changes
-
Enterprise certificates are not supported in Cisco SD-WAN Cloud.
-
Custom subnets are not supported. Any custom subnets configured for your Cisco SD-WAN Cloud-Pro dedicated fabric are removed during migration.
-
A new URL is generated for accessing Cisco Catalyst SD-WAN Manager.
-
This URL is accessed via the Cisco Catalyst SD-WAN Portal.
-
Previous URLs for Cisco Catalyst SD-WAN Manager are not retained.
-
-
Proxy settings from the Cisco SD-WAN Cloud-Pro dedicated fabric are disabled.
-
Statistics and analytics data from your Cisco SD-WAN Cloud-Pro dedicated fabric are not retained.
-
Identity provider information from your Cisco SD-WAN Cloud-Pro dedicated fabric is not retained.
-
Configuring customer identity provider information is not supported.
-
No inbound rules setting is required in Cisco SD-WAN Cloud.
Migration prerequisites
Before migrating from Cisco SD-WAN Cloud-Pro to Cisco SD-WAN Cloud:
-
Valid Cisco SD-WAN Cloud licenses must be available in the Cisco Smart Account and Virtual Account for the current dedicated fabric. Contact your Cisco representative for licensing details.
-
Upgrade the Cisco SD-WAN Cloud-Pro fabric to match the current Cisco SD-WAN Cloud version. The required version will be provided.
For upgrade instructions, refer to the Upgrade SD-WAN Controllers with the Use of vManage GUI or CLI documentation.
-
Provide netadmin credentials for the existing Cisco SD-WAN Cloud-Pro fabric upon request.
-
Verify that all edge devices run on IOS XE SD-WAN ("cEdge"). Viptela OS ("vEdge") devices are not supported for Cisco SD-WAN Cloud fabrics.
-
Cisco Catalyst 8000 Edge Platforms used as cloud gateways for TACACS can be deleted. The system does not support cloud gateways for TACACS. If retained, these platforms remain after migration but are non-functional.
After migration
Once migration completes, the old Cisco SD-WAN Cloud-Pro fabric is no longer operational. Access the new Cisco SD-WAN Cloud fabric using the Cisco Catalyst SD-WAN Portal. For more information, refer to the Cisco Catalyst SD-WAN Portal Configuration Guide document.