Cisco Catalyst SD-WAN Cloud Guide

PDF

Cisco Catalyst SD-WAN Cloud Guide

Add devices from your Smart Account to SD-WAN Manager

Want to summarize with AI?

Log in

Configure and synchronize devices from your Smart Account so they can be integrated and managed within your SD-WAN Cloud environment.


Integrate devices registered in your Smart Account with SD-WAN Manager for centralized management and configuration.
Use this process whenever you need to onboard new devices from your Software Assurance-enabled Smart Account to SD-WAN Manager, ensuring they can be managed as part of your SD-WAN fabric.

Before you begin

  • Ensure you have access credentials for both the SD-WAN Manager and your Smart Account.

  • Confirm the SD-WAN Manager instance is online and connected to the SD-WAN Cloud environment.

Procedure

  1. Log in to the Cisco Catalyst SD-WAN Portal.

  2. Select the appropriate fabric where you want to onboard devices. Then, click Manage Fabric.

  3. From the Cisco SD-WAN Manager menu, select Configuration > Devices.

  4. Click Sync Smart Account.

  5. In the Sync Smart Account pane, click Syncto initiate synchronization with your Smart Account.

After synchronization, devices from your Smart Account appear in the list of edge devices in Cisco SD-WAN Manager for the selected fabric.

What to do next

Review the imported devices, assign configurations or templates as needed, and verify device connectivity and status within your SD-WAN environment.