Cisco Catalyst SD-WAN Cloud Guide

PDF

Cisco Catalyst SD-WAN Cloud Guide

Create a Cloud fabric in the SD-WAN Portal

Want to summarize with AI?

Log in

Configure a Cloud fabric in the SD-WAN Portal by following step-by-step instructions for essential initial deployment.


Set up a Cloud fabric in your Cisco Catalyst SD-WAN environment for network management and deployment.
Use this task to deploy a new Cloud fabric using Cisco Catalyst SD-WAN Portal. Only Cloud fabrics (not dedicated fabrics) are supported in these steps. A valid Smart Account and Virtual Account are required.

Before you begin

  • Log in to Cisco Catalyst SD-WAN Portal.

  • Confirm you have a valid Smart Account and Virtual Account.

Note

The Cisco SD-WAN Cloud fabric is only available in limited locations in the United States, European Union, and Asia-Pacific regions. For other locations, use a dedicated Cisco SD-WAN Cloud-Pro fabric.

Follow these steps to create a Cisco SD-WAN Cloud fabric in the SD-WAN Portal.

Procedure

  1. Log in to the Cisco Catalyst SD-WAN Portal at https://ssp.sdwan.cisco.com using your account username and password.

  2. Select the SD-WAN Customer role.

  3. In the Portal dashboard, choose Create Fabric and select the SD-WAN Cloud fabric type.

  4. Choose your Smart Account and Virtual Account.

  5. If you have unused SD-WAN control component licenses, decide whether to use them to create your fabric. Select Yes to assign the licenses, specify the quantity for each type and confirm the assignment. Otherwise, selectNo and continue.

  6. Enter or select the Fabric Name, Fabric Location, and Fabric Admin(s).

  7. Select a Release Category:

    • Recommended: Preferred for most deployments; emphasizes stability and reliability. The releases in this category are selected based on rigorous quality and stability standards and supported by metrics, customer feedback, and extensive testing. Recommended releases are classified as long-lived and are widely adopted across the customer base.

    • Early Adopter: The newest software versions available; required to access the latest features and platform updates. Required for support of Cisco 8000 Series Secure Routers. You cannot downgrade from Early Adopter to Recommended. When an Early Adopter version is reclassified as Recommended, your system will be upgraded accordingly.

      Early Adopter releases are ideal for deployments that require capabilities not yet available in the Recommended release. They continue to receive patches and bug fixes as they mature. Over time, they may be reclassified as Recommended releases.

      Note

      Early Adopter is the default Release Category option for sites with UNX licenses.

  8. If the selected Release Category supports Cisco Identity Services Engine (Cisco ISE), an option appears to enable it. To enable Cisco ISE, select the option and enter the VPN ID.

    For more information on ISE, refer to Cisco ISE features.

  9. Review all entered information in the preview section. Accept the Terms and Conditions, then select Create Fabric.

An email notification confirms the fabric has been created.

What to do next

Log in to the Cisco Catalyst SD-WAN Portal again to access the new fabric.