Cisco Catalyst SD-WAN Cloud Guide

PDF

Cisco Catalyst SD-WAN Cloud Guide

Configure Cisco ISE integration in SD-WAN Manager

Want to summarize with AI?

Log in

Configure Cisco Identity Services Engine (ISE) integration within SD-WAN Manager to enable secure access and seamless policy management for your SD-WAN fabric.


Integrate Cisco ISE with SD-WAN Manager to centrally manage identity services, enforce policies, and improve security in your SD-WAN environment.
Use this task when you need to enable Cisco ISE integration for a fabric in SD-WAN Manager, which allows for unified access control and policy enforcement across your SD-WAN deployment.

Before you begin

  • Ensure you have administrative access to SD-WAN Manager.

  • Obtain the Cisco ISE server IP address, username, and password.

  • Verify that required CA certificates are available in the correct format (.cer).

  • Confirm that VPN and firewall rules allow communication between SD-WAN Manager and the Cisco ISE server, including necessary ports (HTTPS/443 and pxGrid).

Procedure

  1. Log in to your SD-WAN Manager dashboard.

  2. Go to Administration > Integration Management.

  3. Select the Identity Services Engine tab.

  4. Click Add Connection.

  5. In the Add ISE Server panel, enter this required information:

    • ISE Server IP Address: Enter your Cisco ISE server's IP address.

    • Username: Enter the administrative username for ISE.

    • Password: Enter the corresponding password.

    • VPN: Select the appropriate VPN to ensure network connectivity between SD-WAN Manager and Cisco ISE server.

  6. Upload the trusted CA certificates to establish a secure connection:

    1. Under the ISE Server CA section. upload the Cisco ISE Server CA certificate.
    2. Under the pxGrid Server CA section, upload the pxGrid Server CA certificate for pxGrid communication.
  7. Review all entered information for accuracy, then click Submit.

SD-WAN Manager attempts to authenticate and establish a connection with the Cisco ISE server. If successful, the server status updates to “Connected” or “Active” in the Integration Management list.

If you encounter errors:

  • Field Required Errors: Ensure all required fields are completed.

  • Certificate Errors: Check certificate formats and expiry dates.

  • Connectivity Issues: Confirm VPN routing and firewall rules are correctly configured.

What to do next

Ensure Cisco ISE integration is enabled for the SD-WAN fabric in the SD-WAN Portal. If not done during fabric creation, follow the steps in Enable Cisco ISE integration for a fabric to enable ISE integration for the fabric.


Enable Cisco ISE integration for a fabric

Note
You can enable ISE Integration when creating a fabric. For more information, refer to Create a Cloud fabric in the SD-WAN Portal.

Procedure

  1. Log in to your SD-WAN Portal.

  2. Select the desired fabric.

  3. From the Actions menu, select Enable ISE Integration.

  4. Enter the VPN ID and click OK.