Outlines the Quick Connect Workflow, including feature history, SD-WAN Manager integration, prerequisites, restrictions, step-by-step procedures for accessing the workflow, and comprehensive methods for uploading devices using Auto Sync or manual processes.
Feature history for the Quick Connect workflow
Explains the Quick Connect Workflow, which provides a guided method for onboarding supported WAN edge devices into the Cisco Catalyst SD-WAN fabric.
Quick Connect workflow for SD-WAN Manager
This topic explains the Quick Connect workflow in SD-WAN Manager, which creates a basic day-0 configuration profile for Cisco IOS XE SD-WAN devices and establishes control and data plane access in your WAN.
Prerequisites for using the Quick Connect Workflow
This topic explains the prerequisites and configuration steps that you must perform before you use Quick Connect.
Restrictions for the Quick Connect Workflow
Use these guidelines when configuring the Quick Connect workflow to understand its limitations, supported platforms, and device count restrictions.
Run the Quick Connect Workflow
Learn how to access the Quick Connect Workflow from the SD-WAN Manager menu to start or resume device onboarding.
Auto Sync for uploading devices
This topic explains how Quick Connect behaves when you upload devices using auto sync, including registration and synchronization requirements for Plug-and-Play services in single-tenant environments.
Upload devices manually to SD-WAN Manager
Upload devices manually to SD-WAN Manager.