Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

Remove a tenant from a multitenant WAN edge device using a template

Updated: September 25, 2026

Want to summarize with AI?

Log in

Describes how a provider admin removes a tenant from a multitenant WAN edge device by detaching the tenant’s service VPN template from the device template, then deleting the tenant entry from the Tenant feature template.

To remove a tenant from a multitenant WAN Edge Device, you must detach the tenant service VPN template from the device template and delete the tenant from the Tenant template.

Before you begin

Follow these steps to remove a tenant from a multitenant WAN edge device.

Procedure

  1. Log in to Cisco SD-WAN Manager as the provider admin user.

  2. Remove the tenant service VPN template from the Device template.

    1. From the Cisco SD-WAN Manager menu, choose Configuration > Templates.
    2. Find the device template for the multitenant WAN edge device to which you wish to onboard tenants.
    3. For the device template, click … and click Edit.

      The device template is displayed.

    4. Click Service VPN.
    5. In the Service VPN area, check the check box for the VPN template to be removed.
    6. Click Remove VPN.
    7. Click Update to save and apply the modified configuration.

  3. Delete tenant from the Tenant template.

    1. From the Cisco SD-WAN Manager menu, choose Configuration > Templates.
    2. Click Feature.
    3. Find the Tenant template from which you should delete the tenant.
    4. For the Tenant template, click … and click Edit.
    5. In the Tenant section, find the organization name of the tenant you wish to delete.
    6. Click the Trash icon corresponding to the tenant organization name.
    7. Click Update to save and apply the modified configuration.