Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

Enable multitenancy on provider-level WAN edge devices using a template

Updated: September 25, 2026

Want to summarize with AI?

Log in

Describes how a provider admin enables multitenancy on a provider-level WAN edge device by editing its System feature template.

You can enable multitenancy on a provider-level WAN edge using the Multi Tenant parameter in the System template.

A provider-level WAN edge device can serve more than one tenant.

Before you begin

Follow these steps to enable multitenancy on provider-level WAN edge devices.

Procedure

  1. Log in to Cisco SD-WAN Manager as the provider admin user.

  2. From the Cisco SD-WAN Manager menu, choose Configuration > Templates.

  3. Click Feature.

  4. Find the System template of the provider-level WAN edge device for which you wish to enable multitenancy.

  5. For the System template, click … and click Edit.

  6. In the Basic Configuration area, find the Multi Tenant parameter. Initially, the parameter has a default scope and the default value Off. For the Multi Tenant parameter, do this:

    1. Click the scope drop-down list and choose Global scope.
    2. Click On to enable multitenancy.

  7. Click Update to save and apply the modified configuration.