Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Multitenancy Guide, Releases 26.x and Later

Enable multitenant WAN edge device deployment

Updated: September 25, 2026

Want to summarize with AI?

Log in

Describes the procedure for enabling a WAN edge device in a multitenant environment.

Before you begin

Ensure that every WAN edge device in the deployment, across tenants, is configured with a unique system IP address.

Follow these steps to enable multitenant WAN edge deployment.

Procedure

  1. Log in to Cisco SD-WAN Manager as the provider admin user.

  2. From the Cisco SD-WAN Manager menu, choose Administration > Settings.

  3. Find MT Edge Deployment Settings and click Edit.

  4. For Enable MT Edge Deployment, click Enabled.

    By default, Enable MT Edge Deployment is Disabled.

  5. Click Save.

What to do next

If two or more WAN edge devices in the deployment are configured with the same system IP address, Cisco SD-WAN Manager reports an error. Modify the configuration of the WAN edge devices and try to enable multitenant WAN edge deployment.