Verify protocol pack compliance by manually initiating a check so devices and policies are assessed against the latest available protocol pack. Use this when protocol packs have been uploaded or upgraded and you want an immediate, up-to-date compliance status.
Before you begin
When you upload a new Protocol Pack, Cisco SD-WAN Manager automatically checks whether each device in the network is using the latest available Protocol Pack—called compliance. In addition, it checks policy and device Protocol Pack compliance at regular intervals.
You can trigger the compliance check manually using this procedure. This may be helpful, for example, to check compliance after upgrading the Protocol Pack on one or more devices.
Procedure
| 1. | From the Cisco SD-WAN Manager menu, choose and click Application Source Settings. |
|
| 2. | Locate the SD-WAN Manager Protocol Pack section of the page. |
|
| 3. | Click Sync Compliance. |