Cisco Catalyst SD-WAN Application Management Guide, Releases 26.x and Later

PDF

Cisco Catalyst SD-WAN Application Management Guide, Releases 26.x and Later

Delete Protocol Packs

Updated: October 5, 2026

Want to summarize with AI?

Log in

Verify and delete unused Protocol Packs in the Application Catalog from Application Source Settings. Configure removals only for packs not deployed, scheduled, or used as the reference Protocol Pack.

Before you begin

Follow these steps to delete protocol packs:

Procedure

  1. From the Cisco SD-WAN Manager menu, choose Configuration > Application Catalog.

  2. Open Application Source Settings.

  3. Click Delete Protocol Pack.

    SD-WAN Manager shows a list of the loaded Protocol Packs. The list provides an option to delete Protocol Packs that are not in use in the network, and that don’t meet other conditions that require them to remain available. The conditions include, but are not limited to:

    • Protocol Packs that are currently deployed or scheduled for deployment

    • The Protocol Pack that SD-WAN Manager is using as its reference Protocol Pack

  4. From the list of loaded Protocol Packs, delete any desired Protocol Pack that has the delete option available.