Explains NCS 1000 device bringup for the Optical Automation Solution, including hardware installation, initial configuration, validation, and troubleshooting.
Device bringup is the stage where NCS 1000 platforms are installed, powered, configured, and validated so they are ready for site-level automation.
NCS 1014 overview
This section explains NCS 1014 overview. Use it to understand the purpose, behavior, and dependencies that support the related NCS 1000 platform workflow.
NCS 1004 overview
This section explains NCS 1004 overview. Use it to understand the purpose, behavior, and dependencies that support the related NCS 1000 platform workflow.
NCS 1001 overview
This section explains the setup, initial configuration, and software upgrade processes for the Cisco NCS 1001 platform used as the Optical Line System (OLS) in this OAS solution.
Install Cisco NCS 1014, NCS 1004, and NCS 1001 hardware
Use this procedure to install NCS 1014, NCS 1004, and NCS 1001 hardware. It helps you complete power, fiber, and passive connections for the Optical Access System workflow.
NCS 1001 setup and initial configuration
Prepare Cisco NCS 1001 for operation by completing bootup, Day 0 configuration, and validation.