View the command outputs of the show running-config service-acceleration and show service-acceleration high-availability status to understand the configuration of the service acceleration feature on the switch.
Run the show commands and verify the service-acceleration and High Availability configuration.
Use the show running-config service-acceleration command to view the configuration of the service acceleration feature on the switch.
switch# show running-config service-acceleration
feature service-acceleration
service system hypershield
source-interface loopback100
high-availability
source-interface loopback101
peer 192.168.10.2
no shutdown
service firewall
vrf blue module-affinity dynamic
vrf red module-affinity dynamic
vlan id 100 bridged-traffic module-affinity dynamic
in-service
Use the show service-acceleration high-availability status command to view the high-availability status of the service acceleration system.
switch# show service-acceleration high-availability status
Service System: hypershield
HA Source Interface: loopback101 (192.0.2.2)
HA Admin State: no-shutdown
Agent Status for Service Firewall: ready
Agent HA Status: ready
Peers:
PeerIP Peer Service State HA State with Peer Reason
------------------- ------------------ ------------------ --------------
192.168.10.2 ready ha-ok all criteria met