Cisco Nexus 9000 Series NX-OS Release Notes, Release 10.4(7)M
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Note: The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.
This document describes the features, issues, and limitations of Cisco NX-OS software Release 10.4(7)M for use on the Cisco Nexus 9000 Series switches.
| Date |
Description |
| February 10, 2026 |
Release 10.4(7)M became available. |
There are no new software features introduced in Cisco NX-OS Release 10.4(7)M.
There are no new hardware features introduced in Cisco NX-OS Release 10.4(7)M.
Release Image
In Cisco NX-OS Release 10.4(7)M, the following two 64-bit images are supported:
● The 64-bit Cisco NX-OS image filename with “nxos64-cs” as the prefix (for example, nxos64-cs.10.4.7.M.bin) is supported on all Cisco Nexus 9000 series switches except Cisco Nexus 9500 -R and -R2 switches and cards.
● The 64-bit Cisco NX-OS image filename with "nxos64-msll” as the prefix (for example, nxos64-msll.10.4.7.M.bin) is supported on Cisco Nexus 9000 Series -R and -R2 modular switches.
Note: The 32-bit image is no longer supported.
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
| Identifier |
Headline |
| N9K-C9408 TOR - Telemetry ports 10/1 and 10/2, When we flap 10/1, the second interface also goes down |
|
| GRE traffic is dropped if it needs to cross the Peer-Link and a tunnel interface is configured on the switch |
Resolved Issues
Click the bug ID to access the Bug Search Tool and see additional information about the bug.
| Identifier |
Headline |
| mCast Traffic duplication on the BGW after the reload of the LC - PR1 |
|
| snmp returns wrong PS model cevPowerSupplyNXAPAC350WPI for NXA-PAC-350W-PI2. |
|
| DME has wrong data for 'Rx Power Sensor' and +10 offset is added. |
|
| Nexus 9000: DME inconsistency for NTP configuration |
|
| N9K H1/H2R system status LED is turning off after NX-OS bootup |
|
| VRF leaked Routes stuck with Stale flag leading to traffic loss |
|
| N9K: link incorrectly flaps when negotiated to DCBXP CIN TLV - DCX-No ACK in 100 PDUs |
|
| Add support for 'terminal prompt' command |
|
| N9400 can not display LEM online syslog |
|
| System core file storage usage is unexpectedly high |
|
| When the aaa group1 cannot access the TACACS Server but the source-interface remains up, the permissions obtained by the role are abnormal |
|
| Unknown Unicast Frames with Ethertype 0x0000 Flooded and Looped by vPC VTEPs in eVPN Fabric |
|
| flexcoh_SDK.log fills up /var/sysmgr/tmp_logs folder on the LC impacting ND-ISSU |
|
| STP scalability affected by debugs |
|
| after removing vlan configuration, not able to reuse those flow monitors for other type of interfaces |
|
| Link never comes up for connection between MACSec/retimer ports on N9K-X98900CD-A line cards |
|
| N9K - Interface changes may result in NFM process crash and switch reload |
|
| Route in peer missing after configuring address-family ipv4 unicast under neighbor |
|
| n9k is stuck during booting up |
|
| SPAN Session Not Mirroring Traffic from Port-Channels After Interface Bounces |
|
| SCP File Download Fails in Verbose Mode from NXOS Server |
|
| show ip route detail shows hex values when total routes are more than 1000 |
|
| Nexus 3000/9000: 'snmp-server source-interface informs <interface>' Missing from Running-Config with a Config Profile Present |
|
| STP crash while using private-vlan trunk promiscuous |
|
| Multiple Ports flaps on N9K-X96136YC-R when one port goes down |
|
| Routes Redistributed into RIP Have Metric 0 After RIP Instance Restart |
|
| Applying snmp configuration on a device with type 6 encryption enabled, makes the snmp process to crash |
|
| Micro-Burst Detection stops working after few minutes on N9K-C93180YC-FX3 |
|
| ePBR ACL policy not configured in the hardware after VRF membership change on policy interface |
|
| show flow monitor xxxx cache show empty output |
|
| BGP next-hop filtering does not properly match source protocol during next hop evaluation |
|
| Nexus 9000: Multiple Resets Due to nginx_dme Service Failure |
|
| Unexpected TCAM free space value when carving space to "egr-netflow". |
|
| Incorrect Redirect ACL programming leading to packet drop on Egress |
|
| CLI CR incorrectly fails because of error: Cannot give a peer's address as router-id |
|
| Links went down and did not come back up, TX NA, all ports affected |
|
| copy http bootflash should support FQDN with source-interface option |
|
| NX-OS: Prefix-List Name Auto-Completion Causes Incorrect List Selection When Multiple Similar Names Exist |
|
| VLAN mapping configuration removal disrupts translation for other mapped VLANs on the same interface |
|
| Egress QoS Policy on Eth1/1 causes L2ACLRedirect Diag failure and Kernel Panic |
|
| Upgrade/downgrade from NXOS 10.4(6) to 10.5(1), 10.5(2), and 10.5(3) fails or corrupts the configuration |
|
| N9K -R module: Multicast traffic drop after IGMP report/leave |
|
| Incorrect enforce-first-as behavior with ATTR_SET |
|
| Routes received from eBGP neighbors are not advertised to peers and advertisement timer is not running. |
|
| STP Interface Port ID/Prio.Nbr Changed Post-Upgrade |
|
| duplicate entries in NTP configuration, N9k |
|
| N9K - Micron 5100/5300/5400 Bootflash Read-Only |
|
| POED syslog improperly formatted |
|
| yum.plugin.pubkey_import.log consuming all filesystem space in /var/volatile/log |
|
| Clearing mac on one port lead to FLUSH for some MAC addresses in non-related VLAN |
|
| BGP sessions using type 6 encryption fail after device power-cycle |
|
| when one next-hop static route down the BGP default route learned will disappears |
|
| Compatibility check marks hidden ITD configuration "set ip next-hop verify-availability force-order" as incompatible |
|
| TACACS Not Receiving AV-Pair With Loopback Source |
|
| MACsec session drops causing CDP neighbor loss and traffic disruption on the system |
|
| n9k/ptp: Follow up packet not send out ot of "master" port |
|
| vPC Auto-Recovery does not immediately restore ports after peer-link loss followed by delayed keepalive link loss |
|
| N9300-FX3/FX3S may suddenly bring down all active connected interfaces |
|
| Not able to delete a invalid /0 network command under BGP address-family |
|
| Type-6: Radius/Tacacs AAA using type-6 with TAM is not working when reload due to internal file issue |
|
| n9k/ptp:After failover GM (between GMs or between different ports) MDP appear to stuck in same value |
|
| N9K - iftmc crash after removing vlan from trunk port and deleting the vlan |
|
| Nginx Crash in 10.4 in NXOS 9300 Switch |
|
| OTM Crash after reconfiguring track N9k running 10.3 |
|
| In Nexus NDB switches, tunnel termination with tunnel profile config + Redirect ACL leads to drops |
|
| N9K stops advertising BGP routes after flapping BGP sessions with low advertisement-interval |
|
| N9K FX3 VACL MAC ACL hardware miss programming with ipv6 underlay |
|
| N9k EOR | Block FTE configurations on EX/FX chassis |
|
| Unexpected reload due to memory allocation failure in pixmc |
|
| Switch tracebacks and reloads with "tahusd hap reset" repeatedly after changing TCAM template from l2-l3 to l3 |
|
| telemetry : arp process core with sys/arp/inst ephemeral sensor |
There are no general/known issues in this release.
Device Hardware
The following tables list the Cisco Nexus 9000 Series hardware that Cisco NX-OS Release 10.4(7)M supports. For additional information about the supported hardware, see the Hardware Installation Guide for your Cisco Nexus 9000 Series device.
Table 1. Cisco Nexus 9800 Switches
| Product ID |
Description |
| N9K-C9808 |
16-RU modular switch with slots for up to 8 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 3 power trays. |
| N9K-C9804 |
10-RU modular switch with slots for up to 4 Line Cards in addition to 2 supervisors, 8 fabric modules, 4 fan trays, and 2 power trays. |
Table 2. Cisco Nexus 9800 Series Line Cards
| Product ID |
Description |
| N9K-X9836DM-A |
Cisco Nexus 9800 36-port 400G QSFP-DD Line Card with MACsec. |
| N9K-X98900CD-A |
Cisco Nexus 9800 14-port 400G QSFP-DD + 34-port 100G QSFP28 Line Card. |
Table 3. Cisco Nexus 9800 Series Fabric Modules
| Product ID |
Description |
| N9K-C9808-FM-A |
Cisco Nexus 9800 Fabric Module for 8-slot Chassis |
| N9K-C9804-FM-A |
Cisco Nexus 9800 Fabric Module for 4-slot Chassis |
Table 4. Cisco Nexus 9800 Supervisor Module
| Product ID |
Description |
| N9K-C9800-SUP-A |
Cisco Nexus 9800 Platform Supervisor Module |
Table 5. Cisco Nexus 9800 Fans and Fan Trays
| Product ID |
Description |
| N9K-C9808-FAN-A |
Cisco Nexus 9800 8-slot chassis fan tray (1st Generation) |
| N9K-C9804-FAN-A |
Cisco Nexus 9800 4-slot chassis fan tray (1st Generation) |
Table 6. Cisco Nexus 9800 Power Supplies
| Product ID |
Description |
| NXK-HV6.3KW20A-A |
Cisco Nexus 9800 6,300W 20A AC and HV Power Supply |
Table 7. Cisco Nexus 9500 Switches
| Product ID |
Description |
| N9K-C9504 |
7-RU modular switch with slots for up to 4 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 4 power supplies. |
| N9K-C9508 |
13-RU modular switch with slots for up to 8 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 8 power supplies. |
| N9K-C9516 |
21-RU modular switch with slots for up to 16 Line Cards in addition to two supervisors, 2 system controllers, 3–6 fabric modules, 3 fan trays, and up to 10 power supplies. |
Table 8. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
Description |
Maximum Quantity |
||||
| Cisco Nexus 9504 |
Cisco Nexus 9508 |
Cisco Nexus 9516 |
||||
| N9K-X9716D-GX |
Cisco Nexus 9500 16-port 400G QSFP-DD Line Card |
4 |
8 |
N/A |
||
| N9K-X9736C-FX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9788TC-FX |
Cisco Nexus 9500 48-port 1/10-G BASE-T Ethernet and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X97160YC-EX |
Cisco Nexus 9500 48-port 10/25-Gigabit Ethernet SFP28 and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9732C-FX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9732C-EX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
| N9K-X9736C-EX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
||
Table 9. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
Description |
Maximum Quantity |
||
| Cisco Nexus 9504 |
Cisco Nexus 9508 |
|||
| N9K-X9636C-R |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
| N9K-X9636C-RX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
|
| N9K-X9636Q-R |
Cisco Nexus 9500 36-port 40-Gigabit Ethernet QSFP Line Card |
4 |
8 |
|
| N9K-X96136YC-R |
Cisco Nexus 9500 16-port 1/10 Gigabit, 32-port 10/25 Gigabit, and 4-port 40/100 Gigabit Ethernet Line Card |
4 |
8 |
|
| N9K-X9624D-R2 |
Cisco Nexus 9500 24-port 400-Gigabit QDD Line Card |
Not supported |
8 |
|
Table 10. Cisco Nexus 9500 Cloud Scale Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-E |
Cisco Nexus 9504 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9504-FM-G |
Cisco Nexus 9500 4-slot 1.6Tbps cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E2 |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-G |
Cisco Nexus 9500 8-slot 1.6Tbps cloud-scale fabric module |
4 |
5 |
| N9K-C9516-FM-E2 |
Cisco Nexus 9516 100-Gigabit cloud scale fabric module |
4 |
5 |
Table 11. Cisco Nexus 9500 R-Series Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-R |
Cisco Nexus 9504 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R |
Cisco Nexus 9508 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R2 |
Cisco Nexus 9508 400-Gigabit R-Series fabric module |
4 |
6 |
Table 12. Cisco Nexus 9500 Supervisor Modules
| Supervisor |
Description |
Maximum |
| N9K-SUP-A |
1.8-GHz supervisor module with 4 cores, 4 threads, and 16 GB of memory |
2 |
| N9K-SUP-A+ |
1.8-GHz supervisor module with 4 cores, 8 threads, and 16 GB of memory |
2 |
| N9K-SUP-B |
2.2-GHz supervisor module with 6 cores, 12 threads, and 24 GB of memory |
2 |
| N9K-SUP-B+ |
1.9-GHz supervisor module with 6 cores, 12 threads, and 32 GB of memory |
2 |
Note: N9K-SUP-A and N9K-SUP-A+ are not supported on Cisco Nexus 9504 and 9508 switches with -R and -R2 Line Cards.
Table 13. Cisco Nexus 9500 System Controller
| Product ID |
Description |
Quantity |
| N9K-SC-A |
Cisco Nexus 9500 Platform System Controller Module |
2 |
Table 14. Cisco Nexus 9500 Fans and Fan Trays
| Product ID |
Description |
Quantity |
| N9K-C9504-FAN |
Fan tray for 4-slot modular chassis |
3 |
| N9K-C9504-FAN2 |
Fan tray that supports the Cisco N9K-C9504-FM-G fabric module |
3 |
| N9K-C9508-FAN |
Fan tray for 8-slot modular chassis |
3 |
| N9K-C9508-FAN2 |
Fan tray that supports the Cisco N9K-C9508-FM-G fabric module |
3 |
| N9K-C9516-FAN |
Fan tray for 16-slot modular chassis |
3 |
Table 15. Cisco Nexus 9500 Fabric Module Blanks with Power Connector
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
| N9K-C9508-FAN-PWR |
Cisco Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
Table 16. Cisco Nexus 9500 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| N9K-PAC-3000W-B |
3-KW AC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PDC-3000W-B |
3-KW DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV-3000W-B |
3-KW Universal AC/DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV2-3000W-B |
3.15-KW Dual Input Universal AC/DC Power Supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
Table 17. Cisco Nexus 9400 Switches
| Product ID |
Description |
| N9K-C9408 |
4-RU, 8-slot centralized modular chassis switch, which is configurable with up to 128 200-Gigabit QSFP56 (256 100 Gigabit by breakout) ports or 64 400-Gigabit ports. |
| N9K-C9400-SUP-A |
Cisco Nexus 9400 Supervisor Card |
| N9K-C9400-SW-GX2A |
Cisco Nexus 9400 25.6Tbps Switch Card |
| N9K-X9400-8D |
Cisco Nexus 9400 8p 400G QSFP-DD LEM |
| N9K-X9400-16W |
Cisco Nexus 9400 16p 200G QSFP56 LEM |
| N9K-X9400-22L |
Cisco Nexus 9400 LEM with 22 10G/25G/50G ports. |
Table 18. Cisco Nexus 9200 and 9300 Switches
| Cisco Nexus Switch |
Description |
| N9K-C92348GC-X |
The Cisco Nexus 92348GC-X switch (N9K-C92348GC-X) is a 1-RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 1GBASE-T downlink ports on the 92348GC-X can be configured to work as 100 Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the two-ports of QSFP28 can be configured as 40- and 100-Gbps ports. The Cisco Nexus 92348GC-X is ideal for Big Data customers that require a Gigabit Ethernet ToR switch with local switching. |
| N9K-C93400LD-H1 |
1-RU fixed-port, L2/L3 switch with 48 50G SFP56 ports and 4 400G QSFP-DD uplink ports. |
| N9K-C93108TC-FX3 |
1 RU fixed-port switch Forty-eight 100M/1G/10GBASE-T ports (ports 1–48), Six 40/100-Gigabit ports QSFP28 (ports 49–54), Two management ports (one 10/100/1000BASE-T port and one SFP port), One console port (RS-232), and one USB port. |
| N9K-C9332D-H2R |
1-RU fixed-port switch with 400-Gigabit QSFP-DD ports (32), 10-Gigabit SFP+ ports (2), Management ports (one 10/100/1000BASE-T port and one SFP port), console port (RS-232), and USB port. |
| N9K-C9348GC-FX3 |
1 RU fixed-port switch 48 10/100/1000M copper RJ-45 downlink ports, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
| N9K-C9348GC-FX3PH |
1-RU fixed-port switch 40 10M/100M/1G copper RJ-45 downlink ports that support PoE/PoE+/PoE++ and 8 10M/100M copper RJ-45 downlink ports that support PoE/PoE+/PoE++, 4 10-/25G SFP28 uplink ports, and 2 40-/100G QSFP28 uplink ports. |
| N9K-C93180YC-FX3H |
1-RU fixed-port switch with 24 100M/1/10/25-Gigabit Ethernet SFP28 ports (ports 1–24), 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54), One management port (one 10/100/1000BASE-T port), and One console port (RS-232) |
| N9K-C9316D-GX |
1-RU switch with 16x400/100/40-Gbps ports. |
| N9K-C9364C-GX |
2-RU fixed-port switch with 64 100-Gigabit SFP28 ports. |
| N9K-C93600CD-GX |
1-RU fixed-port switch with 28 10/40/100-Gigabit QSFP28 ports (ports 1–28), 8 10/40/100/400-Gigabit QSFP-DD ports (ports 29–36) |
| N9K-C9364C |
2-RU Top-of-Rack switch with 64 40-/100-Gigabit QSFP28 ports and 2 1-/10-Gigabit SFP+ ports.
● Ports 1 to 64 support 40/100-Gigabit speeds.
● Ports 49–64 support MACsec encryption.
● Ports 651–64and66 support 1/10 Gigabit speeds.
|
| N9K-C9364C-H1 |
2-RU fixed-port switch with 64 100G SFP28 ports. |
| N9K-C9332C |
1-RU fixed switch with 32 40/100-Gigabit QSFP28 ports and 2 fixed 1/10-Gigabit SFP+ ports. |
| N9K-C9332D-GX2B |
1-Rack-unit (1-RU) spine switch with 32p 400/100-Gbps QSFP-DD ports and 2p 1/10 SFP+ ports. |
| N9K-C9348D-GX2A |
48p 40/100/400-Gigabit QSFP-DD ports and 2p 1/10G/10G SFP+ ports |
| N9K-C9364D-GX2A |
64p 400/100-Gigabit QSFP-DD ports and 2p 1/10 SFP+ ports |
| N9K-C93180YC-FX3 |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
| N9K-C93180YC-FX3S |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1–48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49–54) |
| N9K-C9336C-FX2-E |
1-RU switch with 36 40-/100-Gb QSFP28 ports |
| N9K-C9336C-FX2 |
1-RU switch with 36 40-/100-Gb Ethernet QSFP28 ports |
| N9K-C93360YC-FX2 |
2-RU switch with 96 10-/25-Gigabit SFP28 ports and 12 40/100-Gigabit QSFP28 ports |
| N9K-C93240YC-FX2 |
1.2-RU Top-of-Rack switch with 48 10-/25-Gigabit SFP28 fiber ports and 12 40-/100-Gigabit Ethernet QSFP28 ports. |
| N9K-C93216TC-FX2 |
2-RU switch with 96 100M/1G/10G RJ-45 ports, 12 40/100-Gigabit QSFP28 ports, 2 management ports (one RJ-45 and one SFP port), 1 console port, and 1 USB port. |
| N9K-C93180YC-FX |
1-RU Top-of-Rack switch with 10-/25-/32-Gigabit Ethernet/FC ports and 6 40-/100-Gigabit QSFP28 ports. You can configure the 48 ports as 1/10/25-Gigabit Ethernet ports or as FCoE ports or as 8-/16-/32-Gigabit Fibre Channel ports. |
| N9K-C93180YC-FX-24 |
1 RU 24 1/10/25-Gigabit Ethernet SFP28 front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. The SFP28 ports support 1-, 10-, and 25-Gigabit Ethernet connections and 8-, 16-, and 32-Gigabit Fibre Channel connections. |
| N9K-C93108TC-FX |
1-RU Top-of-Rack switch with 48 100M/1/10GBASE-T (copper) ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C93108TC-FX-24 |
1 RU 24 1/10GBASE-T (copper) front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. |
| N9K-C93108TC-FX3P |
1-RU fixed-port switch with 48 100M/1/2.5/5/10GBASE-T ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C9348GC-FXP0F[1] |
Cisco Nexus 9300 with 48p 100M/1 G, 4p 10/25 G SFP+ and 2p 100 G QSFP |
Table 19. Cisco Nexus 9200 and 9300 Fans and Fan Trays
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3 |
| NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3 |
| NXA-SFAN-30CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9348GC-FX3PH |
| NXA-SFAN-30CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9348GC-FX3PH |
| NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6
5
4 |
9332D-H2R
93400LD-H1
93108TC-FX3 |
| NXA-SFAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
6
5
4 |
9332D-GX2B
93400LD-H1
93108TC-FX3 |
| NXA-SFAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
6 |
9332D-GX2B |
| NXA-FAN-160CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
9364C [1F[2]] |
| NXA-FAN-160CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9364C [1] 93360YC-FX2 |
| NXA-FAN-160CFM2-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4 |
9364C-GX |
| NXA-FAN-160CFM2-PI |
Fan module with port-side intake airflow (burgundy coloring) |
4 |
9364C-GX |
| NXA-FAN-30CFM-B |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
|
| NXA-FAN-30CFM-F |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4
6 |
92300YC [1] 9336C-FX2-E
|
| NXA-FAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring)
Fan module with port-side exhaust airflow (blue coloring) |
4
6
6 |
92300YC [1] 9316D-GX
9336C-FX2-E |
| NXA-FAN-65CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-65CFM-PI |
Fan module with port-side exhaust airflow (burgundy coloring) |
3 |
93240YC-FX2 |
Table 20. Cisco Nexus 9200 and 9300 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-PDC-715W-PI |
715-W DC power supply with port-side intake airflow (blue coloring) |
2 |
93108TC-FX3P |
| NXA-PDC-440W-PE |
440-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PDC-440W-PI |
440-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PHV-350W-PE |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PHV-350W-PI |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-350W-PE2 |
350-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 |
| NXA-PAC-350W-PI2 |
350-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-1900W-PE |
1900-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PAC-1900W-PI |
1900-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9348GC-FX3 9348GC-FX3PH |
| NXA-PHV-2KW-PI |
2000-W HVDC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-H2R 93400LD-H1 |
| NXA-PAC-1500W-PE |
1500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9332D-GX2B |
| NXA-PAC-1500W-PI |
1500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9332D-GX2B |
| NXA-PAC-500W-PE |
500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93180YC-FX |
| NXA-PAC-500W-PI |
500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93180YC-FX |
| NXA-PAC-650W-PE |
650-W AC power supply with port-side exhaust (blue coloring) |
2 |
92300YC 93180YC-FX3H |
| NXA-PAC-650W-PI |
650-W AC power supply with port-side intake (burgundy coloring) |
2 |
92300YC 93180YC-FX3H |
| NXA-PAC-750W-PE |
750-W AC power supply with port-side exhaust airflow (blue coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-750W-PI |
750-W AC power supply with port-side intake airflow (burgundy coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-1100W-PE2 |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI2 |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI |
Cisco Nexus 9000 PoE 1100W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1100W-PE |
Cisco Nexus 9000 PoE 1100W AC PS, port-side exhaust |
2 |
93108TC-FX3P |
| NXA-PAC-1900W-PI |
Cisco Nexus 9000 PoE 1900W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1200W-PE |
1200-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
| NXA-PAC-1200W-PI |
1200-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
| NXA-PAC-1400W-PE |
1400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93400LD-H1 |
| NXA-PAC-1400W-PI |
1400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93400LD-H1 |
| N9K-PUV-1200W |
1200-W Universal AC/DC power supply with bidirectional airflow (white coloring) |
2 |
92300YC |
| NXA-PDC-930W-PE |
930-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
| NXA-PDC-930W-PI |
930-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
| NXA-PDC-1100W-PE |
1100-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PDC-1100W-PI |
1100-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PHV-1100W-PE |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PHV-1100W-PI |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-2KW-PE |
2000-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9364C-GX
|
| NXA-PAC-2KW-PI |
2000-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX |
| NXA-PDC-2KW-PE |
2000-W DC power supply with port-side exhaust airflow (blue coloring |
2 |
9364C-GX 93400LD-H1 |
| NXA-PDC-2KW-PI |
2000-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX 9332D-H2R 93400LD-H1 |
| N2200-PAC-400W |
400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
| N2200-PAC-400W-B |
400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
92348GC-X |
| N2200-PDC-350W-B |
350-W DC power supply with port-side intake airflow |
2 |
92348GC-X |
| N2200-PDC-400W |
400-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
Fabric Module and Line Card compatibility details are listed below:
Table 21. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
N9K-C9504-FM-G |
N9K-C9508-FM-G |
N9K-C9504-FM-E |
N9K-C9508-FM-E |
N9K-C9508-FM-E2 |
N9K-C9516-FM-E2 |
| N9K-X9716D-GX |
4 |
4 |
No |
No |
No |
No |
| N9K-X9736C-FX |
5 |
5 |
5 |
5 |
5 |
5 |
| N9K-X97160YC-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9788TC-FX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-FX |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
Table 22. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
N9K-C9504-FM-R |
N9K-C9508-FM-R |
| N9K-X9636C-RX |
6 |
6 |
| N9K-X9636Q-R |
4 6 (n+2 redundancy) |
4 6 (n+2 redundancy) |
| N9K-X9636C-R |
5 6 (n+1 redundancy) |
5 6 (n+1 redundancy) |
| N9K-X96136YC-R |
6 |
6 |
Table 23. Cisco Nexus 9500 R2-Series Line Cards
| Product ID |
N9K-C9508-FM-R2 |
| N9K-X9624D-R2 |
6 |
For information about transceivers and cables supported on a switch, see the Transceiver Module (TMG) Compatibility Matrix. For the transceiver specifications and installation information, see the Install and Upgrade Guides.
Cisco Nexus Dashboard Insights for Data Center
Cisco NX-OS Release 10.4(7)M supports the Cisco Nexus Dashboard Insights on Cisco Nexus 9300-FX, 9300-FX2, 9300-FX3, 9300-GX, 9300-GX2, 9400, and 9800 platform switches and 9500 platform switches with -EX/FX/GX Line Cards. See the Cisco Nexus Insights documentation.
To perform a software upgrade or downgrade, follow the instructions in the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.4(x). For information about an In Service Software Upgrade (ISSU), see the Cisco NX-OS ISSU Support Matrix.
| Document Title |
Description |
| Cisco Nexus 9000 Series Switches documentation |
|
| Cisco NX-OS Software Release and Image-naming Convention |
|
| Cisco Nexus 3000 and 9000 Series NXAPI REST SDK User Guide and API Reference |
Cisco Nexus 3000 and 9000 Series NX-NX-API REST SDK User Guide and API Reference |
| · Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator |
Licensing Information Note: When you downgrade from Cisco NX-OS Release 10.4(7)M to an earlier release, the features that use the ACI+NX-OS Essentials, Advantage, and add-on licenses or the Hardware Streaming Telemetry license continue to work in honor mode in the downgraded version. In addition, the output of the show license usage command continues to include entries for these unsupported licenses. |
| Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide |
Cisco Nexus 9000 Series Software Upgrade and Downgrade Guide, Release 10.4(x) |
| Cisco Nexus 9000 Series FPGA/EPLD Upgrade Release Notes, Release 10.4(7)M |
|
| https://cisco.github.io/cisco-mibs/supportlists/nexus9000/Nexus9000MIBSupportList.html |
Cisco NX-OS Supported MIBs |
| Supported FEX modules |
|
| Cisco Nexus 9000 Series Hardware Installation Guides |
To provide technical feedback on this document, or to report an error or omission, please send your comments to nexus9k-docfeedback@cisco.com. We appreciate your feedback.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2026 Cisco Systems, Inc. All rights reserved.