Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.2.x

PDF

Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.2.x

Enable GNSS

Updated: September 28, 2026

Want to summarize with AI?

Log in

Guides how to re-enable GNSS service on a specific access point from the controller using the appropriate geolocation command.

Use this procedure on the controller to enable the GNSS service.

Procedure

Use the ap name ap-name no geolocation gnss shutdown command to specify the AP and enable the GNSS service on that AP.

Example:

Device# ap name AP-BLR-01 no geolocation gnss shutdown