Cisco Catalyst IW9167E Heavy Duty Access Point Configuration Guide, Release 26.1.x

Enable GNSS

Updated: April 10, 2026

Want to summarize with AI?

Guides how to re-enable GNSS service on a specific access point from the controller using the appropriate geolocation command.

Use this procedure on the controller to enable the GNSS service.

Procedure

Use the ap name ap-name no geolocation gnss shutdown command to specify the AP and enable the GNSS service on that AP.

Example:

Device# ap name AP-BLR-01 no geolocation gnss shutdown

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.