パフォーマンス グラフの作成
手順
ステップ 1 |
を選択します。 このページに初めてアクセスしたときに、オーバーレイ ヘルプ ウィンドウに有用な情報が表示されます。 |
ステップ 2 |
左フレームの上部にある次のいずれかのタブを選択します。
選択内容に応じて、そのデバイス タイプまたはインターフェイス タイプの使用可能なメトリックが [Metrics] パネルに表示されます。 |
ステップ 3 |
パフォーマンスを測定するメトリックの上にカーソルを移動し、メトリックをクリックしてウィンドウの [Graphs] 部分にドラッグします。 オーバーレイ ヘルプ ウィンドウに、アイコン、日付範囲、その他の情報に関する説明が表示されます。 |
1 つのパフォーマンス グラフにおける複数のメトリックの表示
1 つのパフォーマンス グラフに複数のメトリックを表示したい場合もあります。たとえば、CPU 使用率のスパイクを表示する際に、パフォーマンス グラフにメモリ使用率を追加し、CPU 使用率の変化によりメモリ使用率が影響を受けたかどうか確認する場合などです。
(注) |
Prime Infrastructure は、ファブリック インターコネクトを使用する UCS デバイスのインターフェイスをモニタしません。したがって、Tx および Rx の使用率の詳細は、[パフォーマンス グラフ(Performance details)] 画面に表示されません。 |
手順
ステップ 1 |
を選択します。 |
ステップ 2 |
左フレームの上部にある次のいずれかのタブを選択します。
|
ステップ 3 |
パフォーマンスを測定するメトリックの上にカーソルを移動し、メトリックをクリックしてウィンドウの [Graphs] 部分にドラッグします。 |
ステップ 4 |
同じグラフに 2 つ目のメトリックを追加するには、追加するメトリックの上にカーソルを移動し、メトリックをクリックして、前のステップでメトリックを追加した同じグラフまでドラッグします。 1 つのグラフで複数のメトリックを使用したくない場合は、[Graphs] ウィンドウ下部の [Drop item here] と表示されている個所にメトリックをドラッグすると、同じページに新しいグラフを作成できます。 |
ステップ 5 |
[Device 360° View] を起動するには、グラフの上部にある IP アドレスのハイパーリンクをクリックします。 |