Create Performance Graphs
Procedure
Step 1 |
Choose .The first time you access this page, an overlay help window appears with helpful tips. |
Step 2 |
Select one of the tabs at the top of the left frame:
Depending on what you select, the Metrics panel displays the available metrics for the device or interface type. |
Step 3 |
Hover your cursor over a metric for which you want to measure performance, then click and drag the metric on to the Graphs portion of the window. An overlay help window appears explaining the icons, date range, and other information. |
View Multiple Metrics on a Single Performance Graph
You might want to view more than one metric on a single performance graph. For example, if you see a spike in CPU utilization, you might to add the memory utilization metric to the performance graph to see if the memory was impacted by change in CPU utilization.
Note |
Prime Infrastructure does not monitor the interface of the UCS devices with fabric interconnect. Hence, the Tx and Rx utilization details will not be displayed in the Performance Graphs screen. |
Procedure
Step 1 |
Choose . |
Step 2 |
Select one of the tabs at the top of the left frame:
|
Step 3 |
Hover your cursor over a metric for which you want to measure performance, then click and drag the metric on to the Graphs portion of the window. |
Step 4 |
To add a second metric to the same graph, hover your cursor over the metric you want to add, then click and drag the metric on to the same graph that has the metric you added in the previous step. If you don’t want multiple metrics in a single graph, you can create a new graph on the same page by dragging the metric on to the lower portion of the Graphs window where Drop item here is displayed. |
Step 5 |
To launch the Device 360° View, click on the IP address hyperlink at the top of the graph. |