Virtual CME 12.5 Supported Firmware, Platforms, Memory, and Voice Products
Available Languages
Virtual CME 12.5 Supported Firmware, Platforms, Memory, and Voice Products
| About Virtual Cisco Unified Communications Manager Express (Virtual CME) Revised: November 30, 2018 |
|
| Feature Support |
For information on Virtual CME feature support across platforms and protocols, see Virtual CME Platform Protocol Compatibility Matrix. |
| Documentation |
|
| Cisco IOS Compatibility |
Other Cisco IOS software releases may inherit Virtual Unified CME 12.5. To get a list of Cisco IOS software releases that support Virtual Unified CME 12.5, go to Feature Navigator. |
| Downloads |
To download Virtual Unified CME software and phone firmware files, go to the Cisco Software Download site. |
| DDTS Information |
To find the latest Virtual Unified CME DDTS information, go to Bug Toolkit and search by product, for Cisco Unified Communications Manager Express (Unified CME). |
| Cisco Unified IP Phone Support* |
|||
| Device Type |
SCCP Firmware Filename |
SIP Firmware Filename |
Comments |
| Cisco ATA 191 |
-- |
12_0_1SR1-1 |
|
| Cisco ATA-190 |
-- |
ATA190.1-2-1(004) |
|
| Cisco ATA-187 |
-- |
9.2.2 |
|
| Cisco VG350 |
Cisco IOS Release 15.6(3)M2 |
-- |
|
| Cisco VG320 |
Cisco IOS Release 15.6(3)M2 |
-- |
|
| Cisco VG310 |
Cisco IOS Release 15.6(3)M2 |
-- |
|
| Cisco Unified IP Phone 3905 |
-- |
APP3905.9-2-1-0.zz |
|
| Cisco Unified IP Phone 3911/3951 |
-- |
BOOT3951.0-0-0-9.zz* |
|
| Cisco Unified IP Phone 6901/6911 |
-- |
APP6901SIP.9-2-1-0.zz.sgn |
|
| Cisco Unified IP Phone 6921/6941/6961 |
-- |
BOOT69xx.0-0-0-14.zz.sgn |
|
| Cisco Unified IP Phone 6945 |
-- |
SIP6945.9-2-1-0.bin1.sgn |
|
| Cisco Unified IP Phone 7811 |
|
kern2.78xx.12-0-1-11.sbn |
|
| Cisco Unified IP Phone 7821 |
|
kern2.78xx.12-0-1-11.sbn |
|
| Cisco IP Conference Phone 7832 |
|
kern7832.12-1-1-12.sbn |
Supported from Unified CME 12.3 (Cisco IOS XE Fuji 16.9.1) |
| Cisco Unified IP Phone 7841 |
|
kern2.78xx.12-0-1-11.sbn |
|
| Cisco Unified IP Phone 7861 |
|
kern2.78xx.12-0-1-11.sbn |
|
| Cisco Unified IP Phone 7905 |
-- |
-- CP7905080001SIP060412A.zup ( unsigned) |
|
| Cisco Unified IP Phone 7906 and 7911 |
-- |
SIP11.9-2-1S.loads |
|
| Cisco Unified IP Phone 7912 |
-- |
CP7912080001SIP060412A.sbin |
|
| Cisco Unified IP Phone 7940 and 7960 |
-- |
P003-8-12-00.bin |
|
| Cisco Unified IP Phone 7941G and 7941G-GE |
-- |
SIP41.9-2-1S.loads |
|
| Cisco Unified IP Phone 7942G and 7962G |
-- |
SIP42.9-2-1S.loads |
|
| Cisco Unified IP Phone 7945G and 7965G |
-- |
SIP45.9-2-1S.loads |
|
| Cisco Unified IP Phone 7961G and 7961G-GE |
-- |
SIP41.9-2-1S.loads |
|
| -- |
SIP70.9-2-1S.loads |
|
|
| Cisco Unified IP Phone 7975G |
-- |
SIP75.9-2-1S.loads |
|
| Cisco Unified IP Phone 8811 |
-- |
boot1288xx.BE-01-007.sbn |
|
| Cisco Unified IP Phone 8821 |
|
dtblob8821.HE-01-005.sbn |
|
| Cisco Unified IP Phone 8831 |
-- |
kern8831.10-3-1SR3-5.sbn |
|
| Cisco IP Conference Phone 8832 |
|
kern8832.12-1-1-23.sbn |
|
| Cisco Unified IP Phone 8841 |
-- |
boot1288xx.BE-01-007.sbn |
|
| Cisco Unified IP Phone 8845 |
|
fbi8845_65.BEV-01-006.sbn |
|
| Cisco Unified IP Phone 8851 |
-- |
sip88xx.12-1-1-12.loads |
|
| Cisco Unified IP Phone 8851NR |
-- |
sip88xx.12-1-1-12.loads |
|
| Cisco Unified IP Phone 8861 |
-- |
boot1288xx.BE-01-007.sbn |
|
| Cisco Unified IP Phone 8865 |
|
fbi8845_65.BEV-01-006.sbn |
|
| Cisco Unified IP Phone 8941/8945 |
-- |
BOOT894x.0-0-0-9.bin.sgn |
|
| Cisco Unified IP Phone 8961 |
-- |
dkern8961.100609R2-9-2-2SR1-9.sebn |
|
| Cisco Unified IP Phone 9951 |
-- |
dkern9951.100609R2-9-2-2SR1-9.sebn |
|
| Cisco Unified IP Phone 9971 |
-- |
dkern9971.100609R2-9-2-2SR1-9.sebn |
|
| Cisco DX650 |
-- |
10.1(2.41) |
|
| KEM Module** |
-- |
SIP9971.9-2-3-27.loads
For 8851/8851NR/8861/8865 support of KEM, refer the firmware information provided against the respective device type. |
|
| Cisco Unified Video Advantage |
Cisco Unified Video Advantage 1.0(2), 2.0 and higher supported with Cisco Unified IP Phone 7931, 794X, 796X, and 797X, and Cisco IP Communicator. |
||
| * The firmware information provided in the table specifies the minimum recommended version supported for the release. Later verisons are also supported, unless otherwise specified.
** For more information on KEM Module Support on Unified CME, see KEM Support for Cisco Unified SIP IP Phones. |
|||
| Supported Platforms and Memory Specifications: SIP IP Phones* |
|||||||||
| Cisco Platform |
Resource Profile |
Hypervisor |
vCPU |
Maximum Total IP Phones1 |
Maximum SIP IP Phones |
Active Calls Supported |
Hard Disk |
Recommended Memory |
Recommended Flash Memory |
| Cisco CSR 1000V Series Routers |
Small |
ESXi 6.5.0 |
1 |
450 |
450 |
120 |
8 GB |
4 GB |
8 GB |
| Medium |
ESXi 6.5.0 |
2 |
450 |
450 |
120 |
8 GB |
4 GB |
8 GB |
|
| Large |
ESXi 6.5.0 |
4 |
450 |
450 |
120 |
8 GB |
4 GB |
8 GB |
|
| Large plus Extra RAM |
ESXi 6.5.0 |
4 |
450 |
450 |
120 |
8 GB |
8 GB |
8 GB |
|
| * These memory recommendations and maximum numbers of IP phones are for common Virtual CME configurations only. Systems with large numbers of phones and complex configurations may require additional memory or a higher performance platform. 1. Total number of connected IP phones cannot exceed Maximum Total listed including SCCP and SIP phones on the same router. |
|||||||||
Note: The CPU utilization for Virtual CME with 120 calls for basic call, hold/resume as well as supplementary service scenarios is within the 70 percentage range.
Note: The SCCP endpoints supported on Virtual CME (Cisco VG 350, 320 and 310) are validated only for registration (450) with Virtual CME.
Note: For Virtual CME, you will have to configure a maximum throughput value of 100 Mbps. This value could be lesser based on the number of active calls and system codecs applicable. For information on throughput licenses, see Changing Throughput Licenses.
| Compatible Voice Products |
||
| Product Name |
Version |
Comments |
| Cisco Unified Communications Manager |
-- |
See the Cisco Unified Communications Manager compatibility information. |
| Unified CME Telephony Service Provider (TSP) |
2.2.0.4 |
Compatible with Unified CME 7.0 using Cisco IOS Release 12.4(20)T1 or a later release. Provides support for Windows Vista. |
| Cisco Unity Connection |
-- |
|
| Cisco Unity Express |
-- |
|
| Cisco VG310, VG320, VG350 |
Cisco IOS XE Gibraltar 16.10.1a Release
|
Verified with SCCP analog ports. |
Obtain Documentation and Submit a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What’s New in Cisco Product Documentation RSS feed. The RSS feeds are a free service.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Copyright ©2018, Cisco Systems, Inc.
All rights reserved. Printed in USA.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)