Obtaining Hardware
Each Cisco UCS X580p PCIe Node interoperates with other required hardware to provide GPU processing offload and acceleration for the Cisco UCS X-Series M8 compute node that is paired with it.
The following table shows the required hardware to support a fully functioning PCIe node. Use the following table when you want to order spares or additional PCIe nodes to scale out your Cisco UCS X-Fabric deployment.
 Note |
Power cables are required and ship with the GPU cages. |
|
Hardware Component |
Description |
Cisco PID |
|---|---|---|
|
Chassis |
UCS X-Series Server Chassis, for example the Cisco UCS X9508 Server Chassis |
UCSX-9508 |
|
Compute Nodes |
UCS X-Series M8 Compute Nodes, for example, the Cisco UCS X210c M8 Compute Node |
UCSX-215C-M8 UCSX-210C-M8 |
|
PCIe Nodes |
UCS X-Series Gen5 PCIe node, for example the Cisco UCS X580p PCIe Node |
UCSX-580P |
|
GPU Cage Riser Blank (filler panel) |
PCIe blank for UCS X-series 580p PCIe node |
UCSX-PCIF-GPU |
|
PCIe Node GPUs, FHFL |
NVIDIA RTX Pro 6000, PCIe, 600W, 96GB, 2-Slot, FHFL GPU |
UCSX-GPU-RTXP6000 This PID comes with a power cable included. |
|
NVIDIA H200 NVL, PCIe, 600W, 141 GB, 2-Slot NVL2, FHFL GPU |
UCSX-GPU-H200-NVL Required cable, 1 (CBL-X580p-GPU-N) is included with each GPU |
|
|
NVIDIA L40S 350W, 48GB, 2-Slot, FHFL GPU |
UCSX-GPU-L40S This PID comes with a power cable included. |
|
|
Cisco UCS X-Fabric Modules (XFMs) |
UCS X9516 X-Fabric PCIe Gen5 switch module for 9508 chassis Must be deployed as a pair, so two are required per Cisco X-Series Server chassis |
UCSX-FS-9516 |
|
Rear Mezzanine Card |
UCS PCI Gen5 Mezz card for X-Fabric Connectivity Required for Cisco UCS X-Series M8 compute nodes (for example, the Cisco UCS X210c M8 Compute Node) |
UCSX-V5-PCIME |
Feedback