Overview
The Cisco UCS C220 M6 server is a one-rack unit server that can be used standalone, or as part of the Cisco Unified Computing System, which unifies computing, networking, management, virtualization, and storage access into a single integrated architecture. Cisco UCS also enables end-to-end server visibility, management, and control in both bare metal and virtualized environments. Each Cisco UCS C220 M6 server supports:
-
a maximum of two 3rd Generation Intel Xeon processors.
-
32 DDR4 DIMMs (16 per CPU) for a total system memory of either 8 TB (32 256 GB DDR4 DIMMs) or 12 TB (16 x 256 GB DDR4 DIMMs1 and 16 x 512 GB Intel® Optane™ Persistent Memory Module.
(PMEMs)).
-
3 PCI Express riser connectors, which provide slots for “full height” and “half height” PCI-e adapters.
-
Two Titanium (80 PLUS rated) power supplies with support for N and N+1 power redundancy modes.
-
2 10GBase-T Ethernet LAN over Motherboard (LOM) ports for network connectivity, plus one 1 Gigabit Ethernet dedicated management port
-
One mLOM/VIC card provides 10G/25G/40G/50G/100G/200G connectivity. Supported cards are:
-
Cisco UCS VIC 15428 Quad Port CNA MLOM (UCSC-M-V5Q50G) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
four 10G/25G/50G SFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
-
Cisco UCS VIC 15427 Quad Port CNA MLOM (UCSC-M-V5Q50GV2) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
four 10G/25G/50G SFP+/SFP28/SFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15425 Quad Port 10G/25G/50G SFP56 CNA PCIe (UCSC-P-V5Q50G)
-
a x16 PCIe Gen4 Host Interface to the rack server
-
Four 10G/25G/50G SFP+/SFP28/SFP56 ports
-
4GB DDR4 Memory, 3200MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15238 Dual Port 40G/100G/200G QSFP56 mLOM (UCSC-M-V5D200G) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G/200G QSFP/QSFP28/QSFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
-
Cisco UCS VIC 15237 Dual Port 40G/100G/200G QSFP56 mLOM (UCSC-M-V5D200GV2) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G/200G QSFP/QSFP28/QSFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15235 Dual Port 40G/100G/200G QSFP56 CNA PCIe (UCSC-P-V5D200GV2)
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G/200G QSFP/QSFP28/QSFP56 ports
-
4GB DDR4 Memory, 3200MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 1495 Dual Port 40/100G/200G half-height QSFP28 CNA PCIe (UCSC-PCIE-C100-04) supports:
-
a x16 PCIe Gen3 Host Interface to the rack server
-
two 40G/100G QSFP/QSFP28 ports
-
2GB DDR3 Memory, 1866 MHz
-
-
Cisco UCS VIC 1477 Dual Port 40/100G QSFP28 mLOM (UCSC-M-V100-04)
-
a x16 PCIe Gen3 Host Interface to the rack server
-
two 40G/100G QSFP28 ports
-
2GB DDR3 Memory, 1866 MHz
-
-
Cisco UCS VIC 1467 Quad Port 10/25G SFP28 mLOM (UCSC-M-V25-04) supports:
-
a x16 PCIe Gen3 Host Interface to the rack server
-
four 10G/25G SFP28 ports
-
2GB DDR3 Memory, 1866 MHz
-
-
Cisco UCS VIC 1455 Quad Port 10G/25G half-height SFP28 CNA PCIe (UCSC-PCIE-C25Q-04) supports:
-
a x16 PCIe Gen3 Host Interface to the rack server
-
four 10G/25G SFP/SFP28 ports providing two 50G fabric connections
-
2GB DDR3 Memory, 1866 MHz
-
-
-
One KVM port on the front of the server.
-
Two different front-loading hardware configurations are available:
-
The Cisco UCS C220 M6 SFF (UCSC-C220-M6S): This model supports only small form-factor (SFF) drives and has a 10-drive backplane. Supports up to 10 front-loading 2.5-inch SAS/SATA drives, and up to 4 of the drives can be NVMe.
-
The Cisco UCS C220 M6 NVMe (UCSC-C220-M6N): This model supports only small form-factor (SFF) drives and has a 10-drive backplane. Supports up to 10 front-loading 2.5-inch NVMe-only SSDs.
-
-
Rear PCI risers are supported as one to three half-height PCIe risers, or one to two full-height PCIe risers.
-
The server provides an internal slot for one of the following:
-
SATA Interposer to control SATA drives from the PCH (AHCI), or
-
Cisco 12G RAID controller with cache backup to control SAS/SATA drives, or
-
Cisco 12G SAS pass-through HBA to control SAS/SATA drives
-