Configure PTP as the reference clock for NTP to distribute synchronized time to NTP clients, and validate clock synchronization.
PTP as a reference clock for NTP
Describes how Precision Timing Protocol (PTP) time can be used as the reference clock for Network Time Protocol (NTP) to synchronize network devices. Provides context for configuration and supported platforms.
Enable PTP as a reference clock for NTP
Learn how to enable PTP as a reference clock for NTP by configuring the required commands and verifying the configuration and operational status on your switch.
Validate the PTP reference clock
Verify the PTP reference clock configuration, confirm that PTP is locked to a master clock, and check NTP synchronization status.
Troubleshoot PTP as an NTP reference clock
This topic explains how to troubleshoot Precision Time Protocol (PTP) when used as a Network Time Protocol (NTP) reference clock, including synchronization checks, troubleshooting commands, and viewing peering details.
Feature history
Identify the Cisco IOS XE release that introduced support for using PTP as an NTP reference clock.