Connector and Cable Specifications

Connector Specifications

10/100/1000 Ports (Including PoE)

All 10/100/1000 ports use standard RJ-45 connectors and Ethernet pinouts.

Figure 1. 10/100/1000 Port Pinouts

Module Connectors

Figure 2. Duplex LC Cable Connector


Figure 3. Simplex LC Cable Connector


Figure 4. Copper SFP Module LC Connector


MPO-12 Connectors

The multi-fiber push on (MPO) connector is a 12-fiber optical connector with a footprint similar to the SC simplex connector. The MPO connector conforms to the TIA/EIA-604-5 intermateability standard. It is used for establishing 40G and 100G optical parallel connections.

Figure 5. MPO-12 Fiber-Optic Connector

1

12-fiber ribbon

4

Guide pins

2

Boot

5

Ferrule

3

Housing assembly

6

Dust cap


Note


You have to attach an adapter cable to this connector.

Console Port

The switch has two console ports: a USB 5-pin mini-Type B port on the front panel and an RJ-45 console port on the rear panel.

Figure 6. USB Mini-Type B Port

The USB console port uses a USB Type A to 5-pin mini-Type B cable. The USB Type A-to-USB mini-Type B cable is not supplied. You can order an accessory kit (part number 800-33434) that contains this cable.

Figure 7. USB Type A-to-USB 5-Pin Mini-Type B Cable

The RJ-45 console port uses an 8-pin RJ-45 connection. The supplied RJ-45-to-DB-9 adapter cable is used to connect the console port of the switch to a console PC. You need to provide a RJ-45-to-DB-25 female DTE adapter if you want to connect the switch console port to a terminal.

Cables and Adapters

StackWise Accessories

All Cisco stack cables are halogen-free. The StackWise cables of lengths 0.5 m, 1 m and 3 m supported. You can order the stacking cables from your Cisco sales representative.

Table 1. Cisco StackWise-480 and StackWise-1T Accessories for C9300 and C9300X Series Switches

Product ID

Product Description

STACK-T1-50CM

50 cm stacking cable for Cisco StackWise-480 and Cisco StackWise-1T

STACK-T1-1M

1 m stacking cable for Cisco StackWise-480 and Cisco StackWise-1T

STACK-T1-3M

3 m stacking cable for Cisco StackWise-480 and Cisco StackWise-1T

The optional StackWise-320 kit for Catalyst 9300L and 9300LM Series models consists of two stack adapters and a stacking cable. The default stacking cable is 0.5 m, however options of 1m and 3m are also available.

Table 2. Cisco StackWise-320 Accessories for C9300L Series Switches

Product ID

Product Description

C9300L-STACK

Stacking adapter for C9300L Series Switches that is used in conjunction with STACK-T3 type cables

C9300L-STACK-A

Stacking adapter for C9300L and C9300LM Series Switches that is used in conjunction with STACK-T3A type cables

STACK-T3-50CM

50 cm stacking cable for C9300L Series Switches

STACK-T3-1M

1 m stacking cable for C9300L Series Switches

STACK-T3-3M

3 m stacking cable for C9300L Series Switches

STACK-T3A-50CM

50 cm stacking cable for C9300L and C9300LM Series Switches

STACK-T3A-1M

1 m stacking cable for C9300L and C9300LM Series Switches

STACK-T3A-3M

3 m stacking cable for C9300L and C9300LM Series Switches


Note


C9300L Series Switches use both T3 and T3A type stacking cables.


The optional StackWise-320 kit for Catalyst 9300L and 9300LM Series models consists of two stack adapters and a stacking cable. The default stacking cable is 0.5 m, however options of 1m and 3m are also available.

Table 3. Cisco StackWise-320 Accessories for C9300LM Series Switches

Product ID

Product Description

C9300L-STACK-A

Stacking adapter for C9300L and C9300LM Series Switches that is used in conjunction with STACK-T3A type cables

STACK-T3A-50CM

50 cm stacking cable for C9300L and C9300LM Series Switches

STACK-T3A-1M

1 m stacking cable for C9300L and C9300LM Series Switches

STACK-T3A-3M

3 m stacking cable for C9300L and C9300LM Series Switches


Note


C9300LM Series Switches use only T3A type stacking cables.


Table 4. StackWise Cables Minimum Bend Radius and Coiled Diameter

Cable Part Number

Cable Length

Minimum Bend Radius

Minimum Coiled Diameter

STACK-T1-50CM

1.64 feet (0.5 m)

1.6 in. (41 mm)

Not applicable

STACK-T1-1M

3.28 feet (1.0 m)

1.6 in. (41 mm)

5.2 in. (132 mm)

STACK-T1-3M

9.84 feet (3.0 m)

3.2 in. (82 mm)

7.17 in. (182 mm)

STACK-T3-50CM

1.64 feet (0.5 m)

1.6 in. (41 mm)

Not applicable

STACK-T3-1M

3.28 feet (1.0 m)

1.6 in. (41 mm)

5.20 in. (132 mm)

STACK-T3-3M

9.84 feet (3.0 m)

3.2 in. (82 mm)

7.17 in. (182 mm)

STACK-T3A-50CM

1.64 feet (0.5 m)

1.6 in. (41 mm)

Not applicable

STACK-T3A-1M

3.28 feet (1.0 m)

1.6 in. (41 mm)

5.20 in. (132 mm)

STACK-T3A-3M

9.84 feet (3.0 m)

3.2 in. (82 mm)

7.17 in. (182 mm)

  1. With a 0.5 m cable, the minimum coiled diameter is negligible and the cable cannot be physically coiled without exceeding the bending limit.

Cable Pinouts

Figure 8. Four Twisted-Pair Straight-Through Cable Schematic
Figure 9. Four Twisted-Pair Semi-Cross Cable Schematic
Figure 10. Two Twisted-Pair Straight-Through Cable Schematic
Figure 11. Two Twisted-Pair Crossover Cable Schematic

Identifying a Crossover Cable

To identify a crossover cable, compare the two modular ends of the cable. Hold the cable ends side-by-side, with the tab at the back. The wire connected to the pin on the outside of the left plug should be a different color from the wire connected to the pin on the inside of the right plug.
Figure 12. Identifying a Crossover Cable

Console Port Adapter Pinouts

The RS-232 console port uses an 8-pin RJ-45 connector. Use an RJ-45-to-DB-9 adapter cable to connect the switch console port to a console PC. You need to provide a RJ-45-to-DB-25 female DTE adapter to connect the switch console port to a terminal.

Table 5. Console Port Signaling with a DB-9 Adapter

Switch Console 
Port (DTE)

RJ-45-to-DB-9
Terminal Adapter

Console
Device

Signal

DB-9 Pin

Signal

TxD

2

RxD

GND

5

GND

GND

5

GND

RxD

3

TxD

Table 6. Console Port Signaling with a DB-25 Adapter

Switch Console
Port (DTE)

RJ-45-to-DB-25
Terminal Adapter

Console
Device

Signal

DB-25 Pin

Signal

TxD

3

RxD

GND

7

GND

GND

7

GND

RxD

2

TxD