- Preface
- READ ME FIRST
- A Show Commands
- B Show Commands
- C Show Commands
- D Show Commands
- E Show Commands
- F Show Commands
- G Show Commands
- H Show Commands
- I Show Commands
- K Show Commands
- L Show Commands
- M Show Commands
- N Show Commands
- O Show Commands
- P Show Commands
- Q Show Commands
- R Show Commands
- S Show Commands
- T Show Commands
- U Show Commands
- V Show Commands
- X Show Commands
- Index
- show mac-list
- show mac address-table (l2fm)
- show mac address-table (l2fm)
- show mac address-table aging-time
- show mac address-table count
- show mac address-table learning-mode
- show mac address-table multicast
- show mac address-table notification mac-move
- show mac vdc
- show mcectest
- show mcectest mcec interface
- show mgmt-policy
- show module
- show module bandwidth-fairness
- show module fex
- show module supported
- show module uptime
- show monitor
- show monitor session
- show mpls label range
- show mpls label statistics
- show mpls switching
- show mpls switching clients
- show mroute
- show mroute flood vlan
- show mroute summary
- show multicast ftag
- show multicast trees
- show mvpn bgp
- show mvpn mdt encap
- show mvpn mdt route
- show mvpn snmp mib genericTable
- show mvpn snmp mib mvpnBgpMdtUpdateTable
- show mvpn snmp mib mvpnMdtDataTable
- show mvpn snmp mib mvpnMdtDefaultTable
- show mvpn snmp mib mvpnMdtJnRcvTable
- show mvpn snmp mib mvpnMdtJnSendTable
- show mvpn snmp mib mvpnMrouteMdtTable
- show mvpn snmp mib mvpnMvrfNumber
- show mvpn snmp mib mvpnNotificationEnable
- show mvpn snmp mib mvpnTunnelTable
M Show Commands
- show mac-list
- show mac address-table (l2fm)
- show mac address-table (l2fm)
- show mac address-table aging-time
- show mac address-table count
- show mac address-table learning-mode
- show mac address-table multicast
- show mac address-table notification mac-move
- show mac vdc
- show mcectest
- show mcectest mcec interface
- show mgmt-policy
- show module
- show module bandwidth-fairness
- show module fex
- show module supported
- show module uptime
- show monitor
- show monitor session
- show mpls label range
- show mpls label statistics
- show mpls switching
- show mpls switching clients
- show mroute
- show mroute flood vlan
- show mroute summary
- show multicast ftag
- show multicast trees
- show mvpn bgp
- show mvpn mdt encap
- show mvpn mdt route
- show mvpn snmp mib genericTable
- show mvpn snmp mib mvpnBgpMdtUpdateTable
- show mvpn snmp mib mvpnMdtDataTable
- show mvpn snmp mib mvpnMdtDefaultTable
- show mvpn snmp mib mvpnMdtJnRcvTable
- show mvpn snmp mib mvpnMdtJnSendTable
- show mvpn snmp mib mvpnMrouteMdtTable
- show mvpn snmp mib mvpnMvrfNumber
- show mvpn snmp mib mvpnNotificationEnable
- show mvpn snmp mib mvpnTunnelTable
show mac-list
show mac-list [ mac_list_name [ seq seq_no | mac_addr [mac_mask] ] ] [ __readonly__ TABLE_mac_list name seq action rule ]
Syntax Description
| show | Show running system information |
| mac-list | Show mac-lists |
| mac_list_name | Type: string pattern: [!-~]* length: 63 Name of mac list |
| seq | Sequence number |
| seq_no | Type: uinteger min: 1 max: 4294967294 Sequence number |
| mac_addr | Type: ethernet MAC address |
| mac_mask | Type: ethernet MAC mask |
| __readonly__ | |
| TABLE_mac_list | |
| name | Type: string |
| seq | Type: uinteger |
| action | Type: string |
| rule | Type: string |
Command Modes
- /exec
show mac address-table (l2fm)
show mac address-table [ static | dynamic | secure ] [ [ address1 mac-addr | switch-id swid [ sub-switch-id sswid ] | vlan1 id ] + | [ address mac-addr | interface interface-name | vlan id ] + ] [ __readonly__ l2entry header TABLE_mac_address disp_mac_addr disp_type disp_vlan disp_is_static disp_age disp_is_secure disp_is_ntfy disp_port ]
Syntax Description
| show | show |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| static | Display Static Entries |
| dynamic | Display Dynamic Entries |
| secure | Display Secure Entries Not available in this release. |
| address | address |
| address1 | address |
| mac-addr | Type: ethernet MAC Address |
| switch-id | Remote Switch ID |
| swid | Type: integer min: 1 max: 4095 Switch ID |
| sub-switch-id | Remote Sub Switch ID |
| sswid | Type: integer min: 0 max: 255 Sub Switch ID |
| interface | Interface |
| interface-name | Type: interface Interface name |
| vlan | VLAN |
| vlan1 | VLAN |
| id | Type: integer min: 1 max: 4094 VLAN ID |
| __readonly__ | |
| header | Type: string Header |
| l2entry | Type: string L2 Entry String |
| TABLE_mac_address | Mac address table |
| disp_type | Type: string GateWay or Primary Entry or OTV or None |
| disp_vlan | Type: uinteger VLAN |
| disp_mac_addr | Type: ethernet MAC Address |
| disp_is_static | Type: bool Static/Dynamic |
| disp_age | Type: uinteger Age of the Mac |
| disp_is_secure | Type: bool Is mac secure |
| disp_is_ntfy | Type: bool Is mac notified |
| disp_port | Type: string Interface/port info of the mac |
Command Modes
- /exec
show mac address-table (l2fm)
show mac address-table module [count] [ static | dynamic | secure ] [ [ address1 mac-addr | switch-id swid [ sub-switch-id sswid ] | vlan1 id | [ vdc1 vdc | e-vdc ] | fe1 feid ] + | [ address mac-addr | interface interface-name | vlan id | [ vdc vdc | e-vdc ] | fe feid ] + ] [hex] [ __readonly__ entrycount l2entry header pi_e age rm ifname sec ntfy type ]
Syntax Description
| show | show |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| module | Type: integer min: 1 max: 16 Module Number |
| count | Number of entries |
| static | Display Static Entries |
| dynamic | Display Dynamic Entries |
| secure | Display Secure Entries Not available in this release. |
| address | address |
| address1 | address |
| mac-addr | Type: ethernet MAC Address |
| switch-id | Remote Switch ID |
| swid | Type: integer min: 1 max: 4095 Switch ID |
| sub-switch-id | Remote Sub Switch ID |
| sswid | Type: integer min: 0 max: 255 Sub Switch ID |
| interface | Interface |
| interface-name | Type: interface Interface name |
| vlan | VLAN |
| vlan1 | VLAN |
| id | Type: integer min: 1 max: 4094 VLAN ID |
| vdc | VDC ID or Name |
| vdc1 | VDC ID or Name |
| vdc | Type: integer min: 1 max: 16 VDC ID |
| e-vdc | Type: userdef Select VDC ID that match VDC Name |
| fe | Forwarding Engine Instance ID(Zero based) |
| fe1 | Forwarding Engine Instance ID(Zero based) |
| feid | Type: integer min: 0 max: 15 FE ID value |
| hex | display swid/sswid/lid in hex |
| __readonly__ | |
| header | Type: string Header |
| pi_e | Type: string Primary Interface of EARL |
| age | Type: integer min: 1 max: 1000000 Last seen age in seconds |
| rm | Type: string RM |
| ifname | Type: string interface name as string |
| sec | Type: string secure |
| ntfy | Type: string notify |
| entrycount | Type: string Number of L2 entries |
| l2entry | Type: string L2 Entry String |
| type | Type: string MAC type - Static or Dynamic |
Command Modes
- /exec
show mac address-table aging-time
show mac address-table aging-time [ __readonly__ age_str age ]
Syntax Description
| show | show |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| aging-time | Configured/default age |
| __readonly__ | |
| age_str | Type: string Age info |
| age | Type: integer min: 1 max: 1000000 Age time |
Command Modes
- /exec
show mac address-table count
show mac address-table count [ static | dynamic ] [ vlan id | interface interface-name | switch-id swid [ sub-switch-id sswid ] ] + [ __readonly__ TABLE-macaddtblcount id-out count_str total_cnt dyn_cnt static_cnt secure_cnt otv_cnt ]
Syntax Description
| show | show |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| count | Number of MAC entries |
| static | Display Static Entries |
| dynamic | Display Dynamic Entries |
| vlan | VLAN |
| id | Type: integer min: 1 max: 4094 VLAN ID |
| interface | Interface |
| interface-name | Type: interface Interface name |
| switch-id | Remote Switch ID |
| swid | Type: integer min: 1 max: 4095 Switch ID |
| sub-switch-id | Remote Sub Switch ID |
| sswid | Type: integer min: 0 max: 255 Sub Switch ID |
| __readonly__ | |
| TABLE-macaddtblcount | MAC Address Dynamic Count Table |
| id-out | Type: integer MAC Address Table VLAN ID |
| count_str | Type: string Count info |
| total_cnt | Type: integer Total count |
| dyn_cnt | Type: integer Dynamic count |
| static_cnt | Type: integer Static count |
| secure_cnt | Type: integer Secure count |
| otv_cnt | Type: integer OTV count |
Command Modes
- /exec
show mac address-table learning-mode
show mac address-table learning-mode [ vlan id ] [ __readonly__ learning_mode_str vlan_id mode_str ]
Syntax Description
| show | show |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| learning-mode | Learning Mode Not available in this release. |
| vlan | VLAN |
| id | Type: integer min: 1 max: 4094 VLAN ID |
| __readonly__ | |
| learning_mode_str | Type: string Learning Mode |
| vlan_id | Type: integer min: 1 max: 4094 VLAN ID |
| mode_str | Type: string Mode |
Command Modes
- /exec
show mac address-table multicast
show mac address-table multicast [ vlan vlan-id ] [ __readonly__ TABLE_vlan vlan-id mac-addr type age oifs ]
Syntax Description
| show | Show running system information |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| multicast | mcast mac OIF Static Entry Not available in this release. |
| vlan | VLAN/BD |
| vlan-id | Type: vlan VLAN/BD |
| __readonly__ | |
| TABLE_vlan | |
| vlan-id | Type: integer |
| mac-addr | Type: ethernet |
| type | Type: string |
| age | Type: integer |
| oifs | Type: interface |
Command Modes
- /exec
show mac address-table notification mac-move
show mac address-table notification mac-move [ __readonly__ TABLE_mac_notif disp_mm_status disp_mm_triggers disp_macs_added disp_macs_moved disp_macs_removed ]
Syntax Description
| show | show |
| mac | MAC |
| address-table | MAC Address Table |
| notification | Display Notification Information |
| mac-move | Mac Move Notification |
| __readonly__ | Read Only |
| TABLE_mac_notif | Mac address notification table |
| disp_mm_status | Type: uinteger Mac Move Status |
| disp_mm_triggers | Type: uinteger # of triggers |
| disp_macs_added | Type: uinteger Number of MACs added since system bring up |
| disp_macs_removed | Type: uinteger Number of MACs removed since system bring up |
| disp_macs_moved | Type: uinteger Number of MACs moved since system bring up |
Command Modes
- /exec
show mac vdc
show mac vdc vdc_id [ __readonly__ vdc_id mac_address ]
Syntax Description
| show | show |
| mac | show management port mac address of the given vdc |
| vdc | show management port mac address of this vdc id |
| vdc_id | Type: integer min: 1 max: 4 please enter vdc id |
| __readonly__ | |
| vdc_id | Type: string |
| mac_address | Type: string |
Command Modes
- /exec
show mcectest
show mcectest arg [ __readonly__ arg_resp ]
Syntax Description
| show | Show running system information |
| mcectest | Show MCECTEST related information |
| arg | Type: string Enter your arguments |
| __readonly__ | Read Only |
| arg_resp | Type: string Response |
Command Modes
- /exec
show mcectest mcec interface
show mcectest mcec interface if [use-cache] [vdc-id] [ _readonly_ mcec_mode ]
Syntax Description
| show | Show running system information |
| mcectest | Show MCECTEST related information |
| mcec | Show MCECM information |
| interface | Specify interface |
| use-cache | Use cache |
| _readonly_ | |
| mcec_mode | Type: string MCEC port mode |
Command Modes
- /exec
show mgmt-policy
show mgmt-policy { policy-name | all } [ __readonly__ TABLE_mgmt_policy mgt-pol-name [ source-ip source-mask ] [source-ip6] [ src-port-rangestart src-port-range-end ] [source-port] [ dst-port-rangestart dest-port-range-end ] [dest-port] ]
Syntax Description
| show | Show running system information |
| mgmt-policy | PM Management policy |
| policy-name | Type: string Name of the policy |
| all | Show all policies |
| __readonly__ | |
| TABLE_mgmt_policy | Management policy Details |
| mgt-pol-name | Type: string |
| source-ip | Type: ipaddr |
| source-mask | Type: string |
| source-ip6 | Type: ipv6addr |
| src-port-rangestart | Type: integer |
| src-port-range-end | Type: integer |
| source-port | Type: integer |
| dst-port-rangestart | Type: integer |
| dest-port-range-end | Type: integer |
| dest-port | Type: integer |
Command Modes
- /exec
show module
show module [ module | s0 [santa-cruz-range] | fabric [module] ] [ __readonly__ TABLE_modinfo modinf ports modtype model status [ TABLE_modpwrinfo modpwr pwrstat reason ] TABLE_modwwninfo modwwn sw hw slottype [ TABLE_modapplinfo modappl desc applver ] TABLE_modmacinfo modmac mac serialnum TABLE_moddiaginfo mod diagstatus TABLE_xbarinfo xbarinf xbarports xbartype xbarmodel xbarstatus [ TABLE_xbarpwrinfo xbarpwr xbarpwrstat xbarreason ] TABLE_xbarwwninfo xbarwwn xbarsw xbarhw xbarwwnstr TABLE_xbarmacinfo xbarmac xbarmacaddr xbarserialnum ]
Syntax Description
| show | Show running system information |
| module | Show module information |
| module | Type: integer min: 1 max: 30 Enter module number |
| s0 | Type: xbar-str Show xbar information |
| santa-cruz-range | Type: integer-range please enter the xbar number |
| fabric | Show fabric information |
| santa-cruz-range | Type: integer-range please enter the fabric number |
| __readonly__ | |
| TABLE_modinfo | Show Module info |
| modinf | Type: uinteger Module |
| ports | Type: uinteger Num Ports |
| modtype | Type: string Module Type |
| model | Type: string Model |
| status | Status
|
| TABLE_modpwrinfo | Mod Pwr Info |
| modpwr | Type: uinteger Module |
| pwrstat | Power Status
|
| reason | Type: string Reason |
| TABLE_modwwninfo | Mod WWN Info |
| modwwn | Type: uinteger Module |
| sw | Type: string SW Ver |
| hw | Type: string HW Ver |
| slottype | Type: string Slot |
| TABLE_modapplinfo | Mod Appl image info |
| modappl | Type: uinteger Module |
| desc | Type: string Image desc |
| applver | Type: string Version |
| TABLE_modmacinfo | Mod MAC Info |
| modmac | Type: uinteger Module |
| mac | Type: string MAC |
| serialnum | Type: string Serial Num |
| TABLE_moddiaginfo | Mod diag info |
| mod | Type: uinteger Module |
| diagstatus | Type: string Diag status |
| TABLE_xbarinfo | Show xbar info |
| xbarinf | Type: uinteger Module |
| xbarports | Type: uinteger Num Ports |
| xbartype | Type: string Module Type |
| xbarmodel | Type: string Model |
| xbarstatus | Status
|
| TABLE_xbarpwrinfo | Xbar Pwr Info |
| xbarpwr | Type: uinteger Module |
| xbarpwrstat | Power Status
|
| xbarreason | Type: string Reason |
| TABLE_xbarwwninfo | Xbar WWN Info |
| xbarwwn | Type: uinteger Module |
| xbarsw | Type: string SW Ver |
| xbarhw | Type: string HW Ver |
| xbarwwnstr | Type: string WWN |
| TABLE_xbarmacinfo | Xbar MAC Info |
| xbarmac | Type: uinteger Module |
| xbarmacaddr | Type: string MAC |
| xbarserialnum | Type: string Serial Num |
Command Modes
- /exec
show module bandwidth-fairness
show module module bandwidth-fairness [ __readonly__ TABLE_fairness statement ]
Syntax Description
| show | Show running system information |
| module | Show module information |
| module | Type: integer min: 1 max: 30 Enter module number |
| bandwidth-fairness | Show bandwidth fairness status |
| __readonly__ | |
| TABLE_fairness | |
| statement | Type: string |
Command Modes
- /exec
show module fex
show module fex [ all | i ] [ __readonly__ TABLE_modinfo fexinf modinf ports modtype model status TABLE_modwwninfo fexwwn modwwn sw hw wwn TABLE_modmacinfo fexmac modmac mac serialnum ]
Syntax Description
| show | Show running system information |
| module | Show module information |
| fex | Show fex module information |
| all | Show information for all FEX |
| i | Type: integer min: 100 max: 199 Enter FEX identifier |
| __readonly__ | |
| TABLE_modinfo | Show Module info |
| fexinf | Type: uinteger Fex |
| modinf | Type: uinteger Module |
| ports | Type: uinteger Num Ports |
| modtype | Type: string Module Type |
| model | Type: string Model |
| status | Type: string Status |
| TABLE_modwwninfo | Mod WWN Info |
| fexwwn | Type: uinteger Fex |
| modwwn | Type: uinteger Module |
| sw | Type: string SW Ver |
| hw | Type: string HW Ver |
| wwn | Type: string WWN |
| TABLE_modmacinfo | Mod MAC Info |
| fexmac | Type: uinteger Fex |
| modmac | Type: uinteger Module |
| mac | Type: string MAC |
| serialnum | Type: string Serial Num |
Command Modes
- /exec
show module supported
show module supported
Syntax Description
| show | Show running system information |
| module | Show module information |
| supported | Show supported sw-card-types for this chassis |
Command Modes
- /exec
show module uptime
show module uptime [ __readonly__ TABLE_uptimeinf slot starttime daysup hoursup minutesup secondsup ]
Syntax Description
| show | Show running system information |
| module | Show module information |
| uptime | Show how long the module has been up and running |
| __readonly__ | |
| TABLE_uptimeinf | Show uptime info |
| slot | Type: string Slot |
| starttime | Type: date Start Time |
| daysup | Type: uinteger Days Up |
| hoursup | Type: uinteger Hours Up |
| minutesup | Type: uinteger Minutes Up |
| secondsup | Type: uinteger Seconds Up |
Command Modes
- /exec
show monitor
show monitor [ __readonly__ TABLE_session session_number state state_reason description ]
Syntax Description
| show | Show running system information |
| monitor | Show Ethernet SPAN information |
| __readonly__ | Read only |
| TABLE_session | show monitor |
| session_number | Type: integer session id |
| state | State
|
| state_reason | State reason
|
| description | Type: string Session Description |
Command Modes
- /exec
show monitor session
show monitor session { all | session_number | range session_range } [brief] [ __readonly__ TABLE_session session_number flow_id state state_reason description type session_mode [sources_rx] + [sources_tx] + [sources_both] + [destinations] + [acl_destinations] + [source_vlans_rx] + [src_ip] + [erspan_id] + [dst_ip] + [origin_ip] + [vrf_name] + [acl_name] + [erspan_ttl] + [erspan_dscp] + [source_vlans_tx] + [source_vlans_both] + [filter_vlans] + [span_mtu] + [span_rate] + [span_sampling] + [tree-id] + [switchid] + [err_desc] + [l3_egress_span] + [fex_ingress_intf] + [sampling_capability] + [mtu_capability] + [rate_limit_cap] + [mcbe] + [switch_id] + [erspan_v3_cap] + [erspan_acl] + [version] + [erspan_granularity] + [erspan_gran_cap] + [erspan_v2_cap] ]
Syntax Description
| show | Show running system information |
| monitor | Show Ethernet SPAN information |
| session | Show session info |
| all | All sessions |
| session_number | Type: integer min: 1 max: 32 |
| range | Specify a range |
| session_range | Type: integer-mrange |
| brief | Brief information |
| __readonly__ | Read only |
| TABLE_session | show monitor |
| flow_id | Type: integer erspan-id |
| description | Type: string Session Description |
| err_desc | Type: string Error Description |
| type | Session type |
| state | State
|
| state_reason | State reason
|
| session_mode | Type: string Session mode |
| sources_rx | Type: interface List of ingress sources |
| sources_tx | Type: interface List of egress sources |
| sources_both | Type: interface List of sources in both directions |
| span_mtu | Type: uinteger SPAN MTU value |
| span_rate | Type: uinteger SPAN rate limit value |
| span_sampling | Type: uinteger SPAN sampling range |
| destinations | Type: interface List of destinations |
| acl_destinations | Type: interface List of interfaces that wont work for acl capture |
| dst_ip | Type: ipaddr ERSPAN destination IP |
| src_ip | Type: ipaddr ERSPAN source IP |
| origin_ip | Type: ipaddr ERSPAN origin IP at source router |
| erspan_id | Type: uinteger ERSPAN ID Value |
| vrf_name | Type: string ERSPAN session VRF |
| acl_name | Type: string ERSPAN session ACL |
| erspan_ttl | Type: uinteger ERSPAN TTL Value |
| erspan_dscp | Type: uinteger ERSPAN DSCP Value |
| source_vlans_rx | Type: vlan-mrange Source ingress vlan |
| source_vlans_tx | Type: vlan-mrange Source egress vlan |
| source_vlans_both | Type: vlan-mrange Source vlans in both directions |
| filter_vlans | Type: vlan-mrange Filter vlans |
| tree-id | Type: uinteger proxy layer2 gateway source tree-id |
| switchid | Type: uinteger proxy layer2 gateway source switchid |
| sampling_capability | Type: uinteger List of modules that support Sampling |
| mtu_capability | Type: uinteger List of modules that support MTU |
| l3_egress_span | Type: uinteger List of modules that support L3 Multicast Egress SPAN |
| fex_ingress_intf | Type: uinteger List of fex interfaces that wont work for ingress span |
| rate_limit_cap | Type: uinteger List of modules that support Rate Limit |
| mcbe | Type: uinteger List all modules that support multicast best effort |
| switch_id | Type: uinteger erspan_switch-id |
| erspan_v3_cap | Type: uinteger List of modules that support erspan version3 |
| erspan_v2_cap | Type: uinteger List of modules that support erspan version2 |
| erspan_acl | Type: uinteger List of modules that support ERSPAN ACL filtering |
| version | Type: uinteger Erspan source version: v2/v3 |
| erspan_gran_cap | Type: uinteger List of modules that support the granularity set |
| erspan_granularity | Type: string ERSPAN Type III Granularity |
Command Modes
- /exec
show mpls label range
show mpls label range [ __readonly__ TABLE_label_range dynamic-min dynamic-max static-min static-max ]
Syntax Description
| show | Show running system information |
| mpls | MPLS configuration commands |
| label | Label properties |
| range | Label range |
| __readonly__ | |
| TABLE_label_range | |
| dynamic-min | Type: uinteger |
| dynamic-max | Type: uinteger |
| static-min | Type: uinteger |
| static-max | Type: uinteger |
Command Modes
- /exec
show mpls label statistics
show mpls label statistics label [ __readonly__ TABLE_label_stats label packets bytes ]
Syntax Description
| show | Show running system information |
| mpls | Display MPLS status and configuration |
| label | Show a specific label statistics |
| statistics | Statistics for the label |
| label | Type: integer min: 0 max: 524286 Label |
| __readonly__ | |
| TABLE_label_stats | |
| label | Type: uinteger Label value |
| packets | Type: uinteger No. of packets |
| bytes | Type: uinteger No. of bytes |
Command Modes
- /exec
show mpls switching
show mpls switching [ labels label [max-label] | interface intf | { ip-addr | ipv4-prefix } [ vrf vrf-name ] | ipv6-prefix [ vrf vrf-name ] | traffic-eng tunnels [cbts] [tunnel-id] | traffic-eng lsp ipv4 [ ingress-addr tunnel-id ] | aggregate [ ipv4 | ipv6 ] [ vrf vrf-name ] | fec { te_if | ipv4_te_lsp | ipv6_te_lsp | ipv4_prefix [ vrf vrf-name ] | ipv6_prefix [ vrf vrf-name ] | deagg [ vrf vrf-name ] } | summary ] [detail] [private] [ vrf vrf-name ] [ __readonly__ TABLE_vrf vrf_name in_label out_label ipv4_prefix ipv6_prefix tunnel_v4_mid_source tunnel_v6_mid_source tunnel_id ext_v4_tunnel_id ext_v6_tunnel_id tunnel_instance deagg_vrf deagg_af tunnel_head out_interface ipv4_next_hop ipv6_next_hop nhlfe_p2p_flag nhlfe_frr_status nhlfe_stale_flag in_packets in_bytes out_packets out_bytes tunnel_v4_mid_dest tunnel_v6_mid_dest ipv4_next_hop ipv6_next_hop ]
Syntax Description
| show | Show running system information |
| mpls | Display MPLS status and configuration |
| switching | Display the MPLS label switching database |
| traffic-eng | Show traffic-engineering related entries |
| ip-addr | Type: ipaddr Match destination address |
| ipv4-prefix | Type: ipprefix Specify an IP prefix/mask |
| ipv6-prefix | Type: ipv6prefix Specify an IPv6 prefix/mask |
| fec | Show FEC information in the ULIB |
| private | Show more detailed information in the ULIB |
| labels | Show a specific label-related information |
| label | Type: integer min: 0 max: 524286 Low label value |
| max-label | Type: integer min: 0 max: 524286 High label value |
| interface | Match outgoing interface |
| tunnels | Show TE head-end information |
| cbts | Show TE head-end CBTS information |
| lsp | Show TE mid-point information |
| aggregate | Show aggregate-related information |
| intf | Type: interface Specify outgoing interface |
| ingress-addr | Type: ipaddr Match TE ingress address |
| summary | Summarized information |
| detail | Detailed information |
| te_if | TE tunnel head-end |
| ipv4_te_lsp | TE IPv4 LSP midpoint |
| ipv6_te_lsp | TE IPv6 LSP midpoint |
| ipv4_prefix | IPv4 prefix |
| ipv6_prefix | IPv6 prefix |
| ipv4 | Display IPv4 information |
| ipv6 | Display IPv6 information |
| deagg | De-aggregation |
| tunnel-id | Type: integer min: 0 max: 65535 LSP Tunnel ID |
| vrf | Display per-VRF information |
| vrf-name | Type: vrf VRF name (Max Size 32) |
| __readonly__ | |
| TABLE_vrf | |
| vrf_name | Type: string |
| in_label | Type: uinteger |
| out_label | Type: uinteger |
| ipv4_prefix | Type: ipprefix |
| ipv6_prefix | Type: ipv6prefix |
| tunnel_v4_mid_source | Type: ipaddr |
| tunnel_v6_mid_source | Type: ipv6addr |
| tunnel_v4_mid_dest | Type: ipaddr |
| tunnel_v6_mid_dest | Type: ipv6addr |
| tunnel_id | Type: uinteger |
| ext_v4_tunnel_id | Type: ipaddr |
| ext_v6_tunnel_id | Type: ipv6addr |
| tunnel_instance | Type: uinteger |
| tunnel_head | Type: string |
| deagg_vrf | Type: string |
| deagg_af | Type: string |
| out_interface | Type: string |
| ipv4_next_hop | Type: ipaddr |
| ipv6_next_hop | Type: ipv6addr |
| nhlfe_frr_status | Type: string |
| nhlfe_stale_flag | Type: string |
| nhlfe_p2p_flag | Type: string |
| in_packets | Type: uinteger |
| in_bytes | Type: uinteger |
| out_packets | Type: uinteger |
| out_bytes | Type: uinteger |
Command Modes
- /exec
show mpls switching clients
show mpls switching clients [ __readonly__ TABLE_client pib-name pib-index pib-uuid pib-sap stale-time pib-flag stale-due reg-msg conv-msg inv-conv fec-msg fec-add fec-del last-xid fec-ack ]
Syntax Description
| show | Show running system information |
| mpls | Display MPLS status and configuration |
| switching | Display the MPLS label switching database |
| clients | Display ULIB client components |
| __readonly__ | |
| TABLE_client | |
| pib-name | Type: string Name of the client(pib) |
| pib-index | Type: uinteger PIB Index |
| pib-uuid | Type: uinteger PIB UUID |
| pib-sap | Type: uinteger MTS SAP for the pib |
| stale-time | Type: uinteger Stale time |
| pib-flag | Type: uinteger Flags set by the pib |
| stale-due | Type: string Stale timer due in |
| reg-msg | Type: uinteger Number of Registration Message |
| conv-msg | Type: uinteger Number of Converge Message |
| inv-conv | Type: uinteger Number of Invalid Convergence message |
| fec-msg | Type: uinteger Number of FEC messages |
| fec-add | Type: uinteger Number of FEC Add messages |
| fec-del | Type: uinteger Number of FEC delete messages |
| last-xid | Type: uinteger Last XID |
| fec-ack | Type: uinteger Number of FEC Ack messages sent |
Command Modes
- /exec
show mroute
show { l2 | fabricpath } mroute { [vdc-omf] [resolved] | [ vlan vlanid ] { [omf] | [flood] | [ source { srcaddr | v6srcaddr | macsrcaddr } ] [ group { groupaddr | v6groupaddr | macgroupaddr } ] } [resolved] [ ftag ftag-id ] [hex] } [ __readonly__ [hex2] { TABLE_gr [ftag] vlan_id [ v4src v4grp macgrp | v6src v6grp macsrc ] [ omf | flood ] rt-uptime owners num_nh TABLE_nh { nh_if | nh_sw } [stale] [exclude] [svi] flags nh-uptime owner rt_type | done | start } ]
Syntax Description
| show | Show running system information |
| l2 | Layer2 information |
| fabricpath | fabricpath information |
| mroute | Show multicast route database |
| vdc-omf | Display vdc omf route |
| vlan | Show information for a vlan |
| omf | Show catch-all entry consisting of mroute ports |
| flood | Display vlan flood route |
| ftag | Show ftag number |
| source | Show (s, g) source IP address |
| group | Show group address |
| hex | Display switch-ids in hex |
| vlanid | Type: uinteger min: 1 max: 4096 Vlan value |
| ftag-id | Type: uinteger min: 1 max: 1024 ftag id |
| groupaddr | Type: ipaddr Group address |
| v6groupaddr | Type: ipv6addr IPv6 Group address |
| macgroupaddr | Type: string MAC Group address |
| srcaddr | Type: ipaddr Source address |
| v6srcaddr | Type: ipv6addr IPv6 source address |
| macsrcaddr | Type: string MAC source address |
| resolved | Resolve switchid nexthops into the underlying interfaces |
| __readonly__ | Read Only |
| hex2 | Type: bool |
| TABLE_gr | |
| vlan_id | Type: uinteger min: 1 max: 4096 VLAN |
| rt-uptime | Type: duration Time route was created |
| num_nh | Type: uinteger Number of next-hops |
| owners | Type: uinteger Owners |
| v4src | Type: ipaddr IPv4 Multicast traffic source |
| v4grp | Type: ipaddr IPv4 Multicast Group address |
| v6src | Type: ipv6addr IPv6 Multicast traffic source |
| v6grp | Type: ipv6addr IPv6 Multicast Group address |
| macsrc | Type: string MAC Multicast traffic source |
| macgrp | Type: string MAC Multicast Group address |
| ftag | Type: uinteger min: 1 max: 1024 ftag id |
| omf | Type: bool Is OMF route |
| flood | Type: bool Is flood to vlan route |
| TABLE_nh | |
| nh_if | Type: interface The next hop interface |
| nh_sw | Type: uinteger min: 1 max: 4096 The next hop switch id |
| owner | Type: uinteger Owner |
| flags | Type: uinteger flags |
| nh-uptime | Type: duration Time nexthop was created |
| rt_type | Type: uinteger Route type |
| stale | Type: bool Is stale |
| exclude | Type: bool exclude from post routing replication |
| svi | Type: bool SVI interface |
| done | Type: uinteger Done displaying route data |
| start | Type: bool Print header |
Command Modes
- /exec
show mroute flood vlan
show { l2 | fabricpath } mroute flood vlan vlan_id [ __readonly__ vdc_id if_count TABLE_if if_member ]
Syntax Description
| show | Show running system information |
| l2 | Layer2 information |
| fabricpath | fabricpath information |
| mroute | Show multicast route database |
| flood | Display vlan flood route |
| vlan | Vlan |
| vlan_id | Type: integer min: 1 max: 4094 Enter Vlan id |
| __readonly__ | |
| vdc_id | Type: integer VDC Id |
| if_count | Type: integer Number of Interfaces |
| TABLE_if | |
| if_member | Type: interface Interface |
Command Modes
- /exec
show mroute summary
show { l2 | fabricpath } mroute summary [detail] [ __readonly__ total star_g s_g s_g_no_star_g flood omf TABLE_vlan vlan_id vlan_flood vlan_omf vlan_star_g vlan_s_g vlan_s_g_no_star vlan_total ]
Syntax Description
| show | Show running system information |
| l2 | Layer2 information |
| fabricpath | fabricpath information |
| mroute | Show multicast route database |
| summary | Show multicast route database summary |
| detail | Show per vlan detail |
| __readonly__ | Read Only |
| total | Type: uinteger Total number of multicast routes |
| star_g | Type: uinteger Total number of multicast (*, g) routes |
| s_g | Type: uinteger Total number of multicast (s, g) routes |
| s_g_no_star_g | Type: uinteger Number of multicast (s, g) route with no corresponding (*, g) |
| flood | Type: uinteger Total number of flood-to-vlan routes |
| omf | Type: uinteger Total number of omf routes |
| TABLE_vlan | |
| vlan_id | Type: uinteger VLAN ID for summary info |
| vlan_flood | Type: uinteger flood routes per vlan |
| vlan_omf | Type: uinteger OMF routes per vlan |
| vlan_star_g | Type: uinteger (*,G) routes per vlan |
| vlan_s_g | Type: uinteger (S,G) routes per VLAN |
| vlan_s_g_no_star | Type: uinteger (S,G) routes w/o (*,G) per VLAN |
| vlan_total | Type: uinteger Total multicast routes in VLAN |
Command Modes
- /exec
show multicast ftag
show { l2 | fabricpath } multicast ftag [ftag-id] [ __readonly__ TABLE_topo id topo_config TABLE_ftag ftag topo_id config ]
Syntax Description
| show | Show running system information |
| l2 | Layer2 information |
| fabricpath | fabricpath information |
| multicast | Multicast information |
| ftag | ftag number |
| ftag-id | Type: uinteger min: 1 max: 1024 ftag id |
| __readonly__ | Read Only |
| TABLE_topo | |
| id | Type: string topo id |
| topo_config | Type: uinteger program ftag star route |
| TABLE_ftag | |
| ftag | Type: uinteger min: 1 max: 1024 ftag |
| topo_id | Type: string topo id |
| config | Type: uinteger ftag config |
Command Modes
- /exec
show multicast trees
show { l2 | fabricpath } multicast trees [ topo topo-id ] [ ftag ftag-id ] [hex] [ __readonly__ [hex2] { TABLE_swid ftag topo_id sw_id rt-uptime owners num_nh TABLE_nh [preferred] { nh_if | nh_sw } [stale] distance nh-uptime owner flags rt_type | start | done } ]
Syntax Description
| show | Show running system information |
| l2 | Layer2 information |
| fabricpath | fabricpath information |
| multicast | Multicast information |
| trees | Show the broadcast/multicast tree database |
| topo | Show topo instance |
| ftag | Show ftag number |
| hex | Display switch-ids in hex |
| topo-id | Type: uinteger min: 0 max: 64 topo id |
| ftag-id | Type: uinteger min: 1 max: 1024 ftag id |
| __readonly__ | Read Only |
| hex2 | Type: bool |
| TABLE_swid | |
| sw_id | Type: uinteger min: 1 max: 4096 switch id |
| topo_id | Type: uinteger min: 0 max: 64 topo id |
| ftag | Type: uinteger min: 1 max: 1024 ftag id |
| rt-uptime | Type: duration Time route was created |
| num_nh | Type: uinteger Number of next-hops |
| owners | Type: uinteger Owners |
| TABLE_nh | |
| preferred | Type: bool Is preferred interface |
| nh_if | Type: interface The next hop interface |
| nh_sw | Type: uinteger min: 1 max: 4096 The next hop switch id |
| owner | Type: uinteger Owner |
| flags | Type: uinteger flags |
| rt_type | Type: uinteger Route type |
| nh-uptime | Type: duration Time nexthop was created |
| distance | Type: uinteger admin distance |
| stale | Type: bool Is stale |
| start | Type: bool
|
| done | Type: uinteger
|
Command Modes
- /exec
show mvpn bgp
show mvpn bgp { mdt-safi | auto-discovery } [ mdt-source src-addr ] [ __readonly__ TABLE_entry bgp_rd mdt_src mdt_grp local ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information Not available in this release. |
| bgp | Display BGP related information |
| mdt-safi | Display Auto-discovered BGP MDT-SAFI database |
| auto-discovery | Display Auto-discovered BGP MDT-SAFI database |
| mdt-source | Source address of MVPN neighbor |
| src-addr | Type: ipaddr Source Address |
| __readonly__ | |
| TABLE_entry | |
| bgp_rd | Type: string |
| mdt_src | Type: ipaddr |
| mdt_grp | Type: ipaddr |
| local | Type: string |
Command Modes
- /exec
show mvpn mdt encap
show mvpn mdt encap [ vrf { vrf-name | vrf-known-name | all } ] [ __readonly__ TABLE_vrf out_context TABLE_encap encap_index mdt_grp mdt_src mdt_src_if ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information Not available in this release. |
| mdt | Display MDT information |
| encap | Display MDT Encap table |
| vrf | Display per-VRF information |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| __readonly__ | |
| TABLE_vrf | |
| out_context | Type: string |
| TABLE_encap | |
| encap_index | Type: uinteger |
| mdt_grp | Type: ipaddr |
| mdt_src | Type: ipaddr |
| mdt_src_if | Type: interface |
Command Modes
- /exec
show mvpn mdt route
show mvpn mdt route [detail] [ __readonly__ TABLE_vrf out_context TABLE_mroute src_addr grp_addr ref_count ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information Not available in this release. |
| mdt | Display MDT information |
| route | Display MDT route information |
| detail | Display detailed information |
| __readonly__ | |
| TABLE_vrf | |
| out_context | Type: string |
| TABLE_mroute | |
| src_addr | Type: ipaddr |
| grp_addr | Type: ipaddr |
| ref_count | Type: uinteger |
Command Modes
- /exec
show mvpn snmp mib genericTable
show mvpn snmp mib genericTable [mplsVpnVrfName-in] [ __readonly__ TABLE_ciscoMvpnGenericTable mplsVpnVrfName-out ciscoMvpnGenOperStatusChange ciscoMvpnGenOperChangeTime ciscoMvpnGenAssociatedInterfaces ciscoMvpnGenRowStatus ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| genericTable | Show MVPN Generic Table |
| mplsVpnVrfName-in | Type: vrf mplsVpnVrfName |
| __readonly__ | |
| TABLE_ciscoMvpnGenericTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnGenOperStatusChange | Type: integer mib object ciscoMvpnGenOperStatusChange |
| ciscoMvpnGenOperChangeTime | Type: duration mib object ciscoMvpnGenOperChangeTime |
| ciscoMvpnGenAssociatedInterfaces | Type: uinteger mib object ciscoMvpnGenAssociatedInterfaces |
| ciscoMvpnGenRowStatus | Type: integer mib object ciscoMvpnGenRowStatus |
Command Modes
- /exec
show mvpn snmp mib mvpnBgpMdtUpdateTable
show mvpn snmp mib mvpnBgpMdtUpdateTable [ ciscoMvpnBgpMdtUpdGrpAddrType-in ciscoMvpnBgpMdtUpdateGroup-in ciscoMvpnBgpMdtUpdSrcAddrType-in ciscoMvpnBgpMdtUpdateSource-in ] [ __readonly__ TABLE_ciscoMvpnBgpMdtUpdateTable ciscoMvpnBgpMdtUpdGrpAddrType-out ciscoMvpnBgpMdtUpdateGroup-out ciscoMvpnBgpMdtUpdateRd ciscoMvpnBgpMdtUpdSrcAddrType-out ciscoMvpnBgpMdtUpdateSource-out ciscoMvpnBgpMdtUpdOrigAddrType ciscoMvpnBgpMdtUpdateOriginator ciscoMvpnBgpMdtUpdNhAddrType ciscoMvpnBgpMdtUpdateNexthop ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnBgpMdtUpdateTable | show mib table mvpnBgpMdtUpdateTable |
| ciscoMvpnBgpMdtUpdGrpAddrType-in | Type: integer Data MDT Group Address Type |
| ciscoMvpnBgpMdtUpdateGroup-in | Type: ipaddr Data MDT group address in the MDT join TLV |
| ciscoMvpnBgpMdtUpdSrcAddrType-in | Type: integer MDT mulitcast routing enty source address type |
| ciscoMvpnBgpMdtUpdateSource-in | Type: ipaddr Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV |
| __readonly__ | |
| TABLE_ciscoMvpnBgpMdtUpdateTable | |
| ciscoMvpnBgpMdtUpdGrpAddrType-out | Type: integer mib table index ciscoMvpnBgpMdtUpdGrpAddrType |
| ciscoMvpnBgpMdtUpdateGroup-out | Type: ipaddr mib table index ciscoMvpnBgpMdtUpdateGroup |
| ciscoMvpnBgpMdtUpdateRd | Type: string mib object ciscoMvpnBgpMdtUpdateRd |
| ciscoMvpnBgpMdtUpdSrcAddrType-out | Type: integer mib table index ciscoMvpnBgpMdtUpdSrcAddrType |
| ciscoMvpnBgpMdtUpdateSource-out | Type: ipaddr mib table index ciscoMvpnBgpMdtUpdateSource |
| ciscoMvpnBgpMdtUpdOrigAddrType | Type: integer mib object ciscoMvpnBgpMdtUpdOrigAddrType |
| ciscoMvpnBgpMdtUpdateOriginator | Type: ipaddr mib object ciscoMvpnBgpMdtUpdateOriginator |
| ciscoMvpnBgpMdtUpdNhAddrType | Type: integer mib object ciscoMvpnBgpMdtUpdNhAddrType |
| ciscoMvpnBgpMdtUpdateNexthop | Type: ipaddr mib object ciscoMvpnBgpMdtUpdateNexthop |
Command Modes
- /exec
show mvpn snmp mib mvpnMdtDataTable
show mvpn snmp mib mvpnMdtDataTable [mplsVpnVrfName-in] [ __readonly__ TABLE_ciscoMvpnMdtDataTable mplsVpnVrfName-out ciscoMvpnMdtDataRangeAddrType ciscoMvpnMdtDataRangeAddress ciscoMvpnMdtDataWildcardType ciscoMvpnMdtDataWildcardBits ciscoMvpnMdtDataThreshold ciscoMvpnMdtDataRowStatus ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnMdtDataTable | show mib table mvpnMdtDataTable |
| mplsVpnVrfName-in | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| __readonly__ | |
| TABLE_ciscoMvpnMdtDataTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnMdtDataRangeAddrType | Type: integer mib object ciscoMvpnMdtDefaultAddrType |
| ciscoMvpnMdtDataRangeAddress | Type: ipaddr mib object ciscoMvpnMdtDataRangeAddress |
| ciscoMvpnMdtDataWildcardType | Type: integer mib object ciscoMvpnMdtDataWildcardType |
| ciscoMvpnMdtDataWildcardBits | Type: ipaddr mib object ciscoMvpnMdtDataWildcardBits |
| ciscoMvpnMdtDataThreshold | Type: integer mib object ciscoMvpnMdtDataThreshold |
| ciscoMvpnMdtDataRowStatus | Type: integer mib object ciscoMvpnMdtDataRowStatus |
Command Modes
- /exec
show mvpn snmp mib mvpnMdtDefaultTable
show mvpn snmp mib mvpnMdtDefaultTable [mplsVpnVrfName-in] [ __readonly__ TABLE_ciscoMvpnMdtDefaultTable mplsVpnVrfName-out ciscoMvpnMdtDefaultAddrType ciscoMvpnMdtDefaultAddress ciscoMvpnMdtEncapsType ciscoMvpnMdtDefaultRowStatus ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnMdtDefaultTable | show mib table ciscoMvpnMdtDefaultTable |
| mplsVpnVrfName-in | Type: vrf mplsVpnVrfName |
| __readonly__ | |
| TABLE_ciscoMvpnMdtDefaultTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnMdtDefaultAddrType | Type: integer mib object ciscoMvpnMdtDefaultAddrType |
| ciscoMvpnMdtDefaultAddress | Type: ipaddr mib object ciscoMvpnMdtDefaultAddress |
| ciscoMvpnMdtEncapsType | Type: integer mib object ciscoMvpnMdtEncapsType |
| ciscoMvpnMdtDefaultRowStatus | Type: integer mib object ciscoMvpnMdtDefaultRowStatus |
Command Modes
- /exec
show mvpn snmp mib mvpnMdtJnRcvTable
show mvpn snmp mib mvpnMdtJnRcvTable [ mplsVpnVrfName-in ciscoMvpnMdtJnRcvGrpAddrType-in ciscoMvpnMdtJnRcvGroup-in ciscoMvpnMdtJnRcvSrcAddrType-in ciscoMvpnMdtJnRcvSource-in ] [ __readonly__ TABLE_ciscoMvpnMdtJnRcvTable mplsVpnVrfName-out ciscoMvpnMdtJnRcvGrpAddrType-out ciscoMvpnMdtJnRcvGroup-out ciscoMvpnMdtJnRcvSrcAddrType-out ciscoMvpnMdtJnRcvSource-out ciscoMvpnMdtJnRcvUpTime ciscoMvpnMdtJnRcvExpTime ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnMdtJnRcvTable | show mib table ciscoMvpnMdtJnRcvTable |
| mplsVpnVrfName-in | Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| ciscoMvpnMdtJnRcvGrpAddrType-in | Type: integer Data MDT group address type |
| ciscoMvpnMdtJnRcvGroup-in | Type: ipaddr Data MDT group address in the MDT join TLV |
| ciscoMvpnMdtJnRcvSrcAddrType-in | Type: integer Source address type |
| ciscoMvpnMdtJnRcvSource-in | Type: ipaddr Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV |
| __readonly__ | |
| TABLE_ciscoMvpnMdtJnRcvTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnMdtJnRcvGrpAddrType-out | Type: integer mib table index ciscoMvpnMdtJnRcvGrpAddrType |
| ciscoMvpnMdtJnRcvGroup-out | Type: ipaddr mib table index ciscoMvpnMdtJnRcvGroup |
| ciscoMvpnMdtJnRcvSrcAddrType-out | Type: integer mib table index ciscoMvpnMdtJnRcvSrcAddrType |
| ciscoMvpnMdtJnRcvSource-out | Type: ipaddr mib table index ciscoMvpnMdtJnRcvSource |
| ciscoMvpnMdtJnRcvUpTime | Type: duration mib object ciscoMvpnMdtJnRcvUpTime |
| ciscoMvpnMdtJnRcvExpTime | Type: duration mib object ciscoMvpnMdtJnRcvExpTime |
Command Modes
- /exec
show mvpn snmp mib mvpnMdtJnSendTable
show mvpn snmp mib mvpnMdtJnSendTable [ mplsVpnVrfName-in ciscoMvpnMdtJnSendGrpAddrType-in ciscoMvpnMdtJnSendGroup-in ciscoMvpnMdtJnSendSrcAddrType-in ciscoMvpnMdtJnSendSource-in ] [ __readonly__ TABLE_ciscoMvpnMdtJnSendTable mplsVpnVrfName-out ciscoMvpnMdtJnSendGrpAddrType-out ciscoMvpnMdtJnSendGroup-out ciscoMvpnMdtJnSendSrcAddrType-out ciscoMvpnMdtJnSendSource-out ciscoMvpnMdtJnSendMdtGroup ciscoMvpnMdtJnSendMdtRefCt ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnMdtJnSendTable | show mib table ciscoMvpnMdtJnSendTable |
| mplsVpnVrfName-in | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| ciscoMvpnMdtJnSendGrpAddrType-in | Type: integer Data MDT group address type |
| ciscoMvpnMdtJnSendGroup-in | Type: ipaddr Data MDT group address in the MDT join TLV |
| ciscoMvpnMdtJnSendSrcAddrType-in | Type: integer Source address type |
| ciscoMvpnMdtJnSendSource-in | Type: ipaddr Souce addres for the MDT mulitcast routing enty created following the recepit of MDT join TLV |
| __readonly__ | |
| TABLE_ciscoMvpnMdtJnSendTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnMdtJnSendGrpAddrType-out | Type: integer mib table index ciscoMvpnMdtJnSendGrpAddrType |
| ciscoMvpnMdtJnSendGroup-out | Type: ipaddr mib table index ciscoMvpnMdtJnSendGroup |
| ciscoMvpnMdtJnSendSrcAddrType-out | Type: integer mib table index ciscoMvpnMdtJnSendSrcAddrType |
| ciscoMvpnMdtJnSendSource-out | Type: ipaddr mib table index ciscoMvpnMdtJnSendSource |
| ciscoMvpnMdtJnSendMdtGroup | Type: ipaddr mib object ciscoMvpnMdtJnSendMdtGroup |
| ciscoMvpnMdtJnSendMdtRefCt | Type: uinteger mib object ciscoMvpnMdtJnSendMdtRefCt |
Command Modes
- /exec
show mvpn snmp mib mvpnMrouteMdtTable
show mvpn snmp mib mvpnMrouteMdtTable [ mplsVpnVrfName-in ciscoMvpnMrouteMvrfGrpAddrType-in ciscoMvpnMrouteMvrfGroup-in ciscoMvpnMrouteMvrfSrcAddrType-in ciscoMvpnMrouteMvrfSource-in ciscoMvpnMrouteUpDownStreamInfo-in ] [ __readonly__ TABLE_ciscoMvpnMrouteMdtTable mplsVpnVrfName-out ciscoMvpnMrouteMvrfGrpAddrType-out ciscoMvpnMrouteMvrfGroup-out ciscoMvpnMrouteMvrfSrcAddrType-out ciscoMvpnMrouteMvrfSource-out ciscoMvpnMrouteUpDownStreamInfo-out ciscoMvpnMrouteMdtGrpAddrType ciscoMvpnMrouteMdtGroup ciscoMvpnMrouteMdtType ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnMrouteMdtTable | show mib table mvpnMrouteMdtTable |
| mplsVpnVrfName-in | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| ciscoMvpnMrouteMvrfGrpAddrType-in | Type: integer Group address type of multicast routing entry |
| ciscoMvpnMrouteMvrfGroup-in | Type: ipaddr Group address of multicast routing entry |
| ciscoMvpnMrouteMvrfSrcAddrType-in | Type: integer Source address type |
| ciscoMvpnMrouteMvrfSource-in | Type: ipaddr Source address of multicast routing entry |
| ciscoMvpnMrouteUpDownStreamInfo-in | Type: integer if PE is Upstream or downstream router for the multcast routing entry |
| __readonly__ | |
| TABLE_ciscoMvpnMrouteMdtTable | |
| mplsVpnVrfName-out | Type: string mib table index mplsVpnVrfName |
| ciscoMvpnMrouteMvrfGrpAddrType-out | Type: integer mib table index ciscoMvpnMrouteMvrfGrpAddrType |
| ciscoMvpnMrouteMvrfGroup-out | Type: ipaddr mib table index ciscoMvpnMrouteMvrfGroup |
| ciscoMvpnMrouteMvrfSrcAddrType-out | Type: integer mib table index ciscoMvpnMrouteMvrfSrcAddrType |
| ciscoMvpnMrouteMvrfSource-out | Type: ipaddr mib table index ciscoMvpnMrouteMvrfSource |
| ciscoMvpnMrouteUpDownStreamInfo-out | Type: integer mib table index ciscoMvpnMrouteUpDownStreamInfo |
| ciscoMvpnMrouteMdtGrpAddrType | Type: integer mib object ciscoMvpnMrouteMdtGrpAddrType |
| ciscoMvpnMrouteMdtGroup | Type: ipaddr mib object ciscoMvpnMrouteMdtGroup |
| ciscoMvpnMrouteMdtType | Type: integer mib object ciscoMvpnMrouteMdtType |
Command Modes
- /exec
show mvpn snmp mib mvpnMvrfNumber
show mvpn snmp mib mvpnMvrfNumber [ __readonly__ ciscoMvpnMvrfNumber ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables/scalars |
| mvpnMvrfNumber | Show number of MVRFs |
| __readonly__ | Read Only |
| ciscoMvpnMvrfNumber | Type: integer mib object ciscoMvpnMvrfNumber |
Command Modes
- /exec
show mvpn snmp mib mvpnNotificationEnable
show mvpn snmp mib mvpnNotificationEnable [ __readonly__ ciscoMvpnNotificationEnable ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables/scalars |
| mvpnNotificationEnable | Show value of ciscoMvpnNotificationEnable |
| __readonly__ | Read Only |
| ciscoMvpnNotificationEnable | Type: integer mib object ciscoMvpnNotificationEnable |
Command Modes
- /exec
show mvpn snmp mib mvpnTunnelTable
show mvpn snmp mib mvpnTunnelTable [ifIndex-in] [ __readonly__ TABLE_ciscoMvpnTunnelTable ifIndex-out ciscoMvpnTunnelName ciscoMvpnTunnelMvrf ]
Syntax Description
| show | Show running system information |
| mvpn | Display Multicast VPN information |
| snmp | show snmp |
| mib | show mib tables |
| mvpnTunnelTable | show mib table mvpnTunnelTable |
| ifIndex-in | Type: integer Interface Index |
| __readonly__ | |
| TABLE_ciscoMvpnTunnelTable | |
| ifIndex-out | Type: integer mib table index ifIndex |
| ciscoMvpnTunnelName | Type: string mib object ciscoMvpnTunnelName |
| ciscoMvpnTunnelMvrf | Type: string mib object ciscoMvpnTunnelMvrf |
Command Modes
- /exec
Feedback