- Preface
- READ ME FIRST
- A Show Commands
- B Show Commands
- C Show Commands
- D Show Commands
- E Show Commands
- F Show Commands
- G Show Commands
- H Show Commands
- I Show Commands
- K Show Commands
- L Show Commands
- M Show Commands
- N Show Commands
- O Show Commands
- P Show Commands
- Q Show Commands
- R Show Commands
- S Show Commands
- T Show Commands
- U Show Commands
- V Show Commands
- X Show Commands
- Index
- show hardware
- show hardware access-list lou resource threshold
- show hardware access-list resource pooling
- show hardware access-list tcam region
- show hardware capacity
- show hardware capacity eobc
- show hardware capacity forwarding
- show hardware capacity interface
- show hardware capacity module
- show hardware capacity power
- show hardware fabricpath mac-learning module
- show hardware feature-capability
- show hardware forwarding interface statistics mode
- show hardware forwarding multicast fabric-path ingress
- show hardware ip verify
- show hardware mac address-table
- show hardware qos eoq stats-class
- show hardware qos ns-buffer-profile
- show hardware qos ns-mcq3-alias
- show hardware rate-limiter
- show hardware rl snmp class-id
- show hardware rl snmp global class-id
- show hardware rl snmp local snmp-index class-id
- show hosts
- show hsrp
- show hsrp bfd-sessions
- show hsrp delay
- show hsrp ext-mib sec-addr
- show hsrp ext-mib use-bia
- show hsrp summary
H Show Commands
- show hardware
- show hardware access-list lou resource threshold
- show hardware access-list resource pooling
- show hardware access-list tcam region
- show hardware capacity
- show hardware capacity eobc
- show hardware capacity forwarding
- show hardware capacity interface
- show hardware capacity module
- show hardware capacity power
- show hardware fabricpath mac-learning module
- show hardware feature-capability
- show hardware forwarding interface statistics mode
- show hardware forwarding multicast fabric-path ingress
- show hardware ip verify
- show hardware mac address-table
- show hardware qos eoq stats-class
- show hardware qos ns-buffer-profile
- show hardware qos ns-mcq3-alias
- show hardware rate-limiter
- show hardware rl snmp class-id
- show hardware rl snmp global class-id
- show hardware rl snmp local snmp-index class-id
- show hosts
- show hsrp
- show hsrp bfd-sessions
- show hsrp delay
- show hsrp ext-mib sec-addr
- show hsrp ext-mib use-bia
- show hsrp summary
show hardware
show hardware [ __readonly__ header_str bios_ver_str [loader_ver_str] kickstart_ver_str [sys_ver_str] bios_cmpl_time kick_file_name kick_cmpl_time kick_tmstmp [isan_file_name] [isan_cmpl_time] [isan_tmstmp] chassis_id module_id cpu_name memory mem_type proc_board_id [host_name] bootflash_size [slot0_size] kern_uptm_days kern_uptm_hrs kern_uptm_mins kern_uptm_secs rr_usecs rr_ctime rr_reason [rr_sys_ver] [rr_service] [manufacturer] TABLE_slot [ TABLE_slot_info [ [num_slot_str] [status_ok_empty] [ [ type [num_submods] ] model_num hw_ver part_num part_revision manuf_date serial_num CLEI_code ] ] ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| __readonly__ | |
| header_str | Type: string |
| bios_ver_str | Type: string |
| loader_ver_str | Type: string |
| kickstart_ver_str | Type: string |
| sys_ver_str | Type: string |
| bios_cmpl_time | Type: string |
| kick_file_name | Type: string |
| kick_cmpl_time | Type: string |
| kick_tmstmp | Type: string |
| isan_file_name | Type: string |
| isan_cmpl_time | Type: string |
| isan_tmstmp | Type: string |
| chassis_id | Type: string |
| module_id | Type: string |
| cpu_name | Type: string |
| memory | Type: integer |
| mem_type | Type: string |
| proc_board_id | Type: string |
| bootflash_size | Type: integer |
| slot0_size | Type: integer |
| host_name | Type: string |
| kern_uptm_days | Type: integer |
| kern_uptm_hrs | Type: integer |
| kern_uptm_mins | Type: integer |
| kern_uptm_secs | Type: integer |
| rr_usecs | Type: integer |
| rr_ctime | Type: integer |
| rr_reason | Type: string |
| rr_sys_ver | Type: string |
| rr_service | Type: string |
| manufacturer | Type: string |
| TABLE_slot | Slot |
| TABLE_slot_info_header | Slot Info Header |
| num_slot_str | Type: string Number of elements |
| TABLE_slot_info | Slot Info |
| status_ok_empty | Type: string Status (Present or Absent) |
| type | Type: string Description of the element |
| num_submods | Type: string Number of Submodules |
| model_num | Type: string Model Number |
| hw_ver | Type: string Hardware version |
| part_num | Type: string Part Number |
| part_revision | Type: string Part revision |
| manuf_date | Type: string Manufacturing date |
| serial_num | Type: string Serial Number |
| CLEI_code | Type: string CLEI code |
Command Modes
- /exec
show hardware access-list lou resource threshold
show hardware access-list lou resource threshold [ __readonly__ current [ lou [ resource [ threshold [ threshold_value ] ] ] ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| access-list | Access Control List |
| lou | LOU |
| resource | hardware resource |
| threshold | port expansion threshold |
| __readonly__ | |
| current | |
| lou | |
| resource | |
| threshold | |
| threshold_value | Type: integer |
Command Modes
- /exec
show hardware access-list resource pooling
show hardware access-list resource pooling [ __readonly__ mod-num status ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| access-list | Access Control List |
| resource | Hardware resource Not available in this release. |
| pooling | ACL programming across TCAM banks |
| __readonly__ | |
| mod-num | Type: integer module number |
| status | Type: integer Banchaining status |
Command Modes
- /exec
show hardware access-list tcam region
show hardware access-list tcam region [ __readonly__ TCAM_Region [ TABLE_Sizes tcam_type tcam_size ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| access-list | Access Control List |
| tcam | Show tcam parameters |
| region | Show tcam region sizes |
| __readonly__ | |
| TCAM_Region | |
| TABLE_Sizes | |
| tcam_type | Type: string |
| tcam_size | Type: integer |
Command Modes
- /exec
show hardware capacity
show hardware capacity
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | Hardware usage levels for Power, Switching Fabric, Flash, etc |
Command Modes
- /exec
show hardware capacity eobc
show hardware capacity eobc [ __readonly__ eobc_usage eobc_rx_packets eobc_rx_dropped eobc_rx_pps eobc_tx_packets eobc_tx_dropped eobc_tx_pps ]
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | resource inventory and/or usage level |
| eobc | EOBC resources |
| __readonly__ | |
| eobc_usage | |
| eobc_rx_packets | Type: uinteger |
| eobc_rx_dropped | Type: uinteger |
| eobc_rx_pps | Type: uinteger |
| eobc_tx_packets | Type: uinteger |
| eobc_tx_dropped | Type: uinteger |
| eobc_tx_pps | Type: uinteger |
Command Modes
- /exec
show hardware capacity forwarding
show hardware capacity forwarding
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | Hardware usage levels for Power, Switching Fabric, Flash, etc |
| forwarding | L2/L3 Forwarding resources |
Command Modes
- /exec
show hardware capacity interface
show hardware capacity interface [ __readonly__ TABLE_module_drops module_drops tx_drops rx_drops max_tx_port max_rx_port TABLE_module_buffers module_buffers tx_buffers rx_buffers ]
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | Usage levels |
| interface | Interface Resources - Tx/Rx drops and Tx/Rx buffers |
| __readonly__ | Read Only |
| module_drops | Type: uinteger Module number for Tx/Rx drops |
| TABLE_module_drops | show module |
| tx_drops | Type: longlong Tx drops |
| rx_drops | Type: longlong Rx drops |
| max_tx_port | Type: uinteger Port with max Tx drops |
| max_rx_port | Type: uinteger Port with max Rx drops |
| module_buffers | Type: uinteger Module number for Tx/Rx buffers |
| TABLE_module_buffers | show module |
| tx_buffers | Type: uinteger Tx buffers |
| rx_buffers | Type: uinteger Rx buffers |
Command Modes
- /exec
show hardware capacity module
show hardware capacity module [ __readonly__ sup_ha_status sup_ha_admin_status sup_ha_oper_status dual_sup_hw_state redundancy_state switch_resouces TABLE_lcinfo mod_num model_num part_num serial_num TABLE_xbarinfo mod_num1 model_num1 part_num1 serial_num1 TABLE_flash_nvram_info mod_num2 dev_name total_bytes free_bytes percent_used ]
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | resource inventory and/or usage level |
| module | SUP, LC, XBAR |
| __readonly__ | |
| sup_ha_status | |
| sup_ha_admin_status | Type: uinteger |
| sup_ha_oper_status | Type: uinteger |
| dual_sup_hw_state | Type: string |
| redundancy_state | Type: string |
| switch_resouces | |
| TABLE_lcinfo | |
| mod_num | Type: uinteger |
| model_num | Type: string |
| part_num | Type: string |
| serial_num | Type: string |
| TABLE_xbarinfo | |
| mod_num1 | Type: uinteger |
| model_num1 | Type: string |
| part_num1 | Type: string |
| serial_num1 | Type: string |
| TABLE_flash_nvram_info | |
| mod_num2 | Type: uinteger |
| dev_name | Type: string |
| total_bytes | Type: string |
| free_bytes | Type: string |
| percent_used | Type: string |
Command Modes
- /exec
show hardware capacity power
show hardware capacity power [ __readonly__ power_summary ps_redun_mode_admin ps_redun_mode_oper power_total power_rsvd power_rsvd_percent power_given_mod power_given_mod_percent power_avail power_avail_percent power_out_actual_draw power_input_actual_draw ]
Syntax Description
| show | Show running system information |
| hardware | Hardware related |
| capacity | resource inventory and/or usage level |
| power | power summary |
| __readonly__ | |
| power_summary | |
| ps_redun_mode_admin | Mode: Redundant or Non-redundant
|
| ps_redun_mode_oper | Mode: Redundant or Non-redundant
|
| power_total | Type: string |
| power_rsvd | Type: string |
| power_rsvd_percent | Type: string |
| power_given_mod | Type: string |
| power_given_mod_percent | Type: string |
| power_avail | Type: string |
| power_avail_percent | Type: string |
| power_out_actual_draw | Type: string Total Power Output, Actuals |
| power_input_actual_draw | Type: string Total Power Input, Actuals |
Command Modes
- /exec
show hardware fabricpath mac-learning module
show hardware fabricpath mac-learning module module [ __readonly__ [ TABLE_module module_num port_group mac_learning ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| fabricpath | Fabric Path Not available in this release. |
| mac-learning | MAC Learning |
| module | Specify a module number |
| module | Type: integer Specify a module number |
| __readonly__ | |
| TABLE_module | |
| module_num | Type: integer Specify a module number |
| port_group | Type: string |
| mac_learning | Type: string |
Command Modes
- /exec
show hardware feature-capability
show hardware feature-capability [detailed] [ __readonly__ [ TABLE_feature_support feature_name [ TABLE_module_support mod_inst support ] ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| feature-capability | show registered features supported |
| detailed | detailed |
| __readonly__ | |
| TABLE_feature_support | show features supported |
| feature_name | Type: string feature name |
| TABLE_module_support | show registered features supported |
| mod_inst | Type: string module instance |
| support | Type: string support details |
Command Modes
- /exec
show hardware forwarding interface statistics mode
show hardware forwarding interface statistics mode [ __readonly__ system [ sysmode ] [ TABLE_module module modmode ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| forwarding | Hardware forwarding |
| interface | Interface |
| statistics | Statistics |
| mode | Statistics mode |
| __readonly__ | |
| system | |
| sysmode | Type: string |
| TABLE_module | |
| module | Type: integer Specify a module number |
| modmode | Type: string |
Command Modes
- /exec
show hardware forwarding multicast fabric-path ingress
show hardware forwarding multicast fabric-path ingress ing-intf { vlan vlan | ethertype ethertype | src-mac src-mac | dst-mac dst-mac | src-ip src-ip | src-ipv6 src-ipv6 | dst-ip dst-ip | dst-ipv6 dst-ipv6 | src-port src-port | dst-port dst-port } + [ __readonly__ module [ module_num rbh ] ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| forwarding | Show hardware information for forwarding path |
| multicast | Show hardware information for multicast forwarding |
| fabric-path | Show hardware information for multicast forwarding Not available in this release. |
| ingress | Ingress interface for multicast traffic |
| ing-intf | Type: interface |
| vlan | VLAN if switchport |
| vlan | Type: vlan |
| ethertype | Ethertype of the packet stream |
| ethertype | Type: hex |
| src-mac | Source MAC Address |
| src-mac | Type: ethernet |
| dst-mac | Destination MAC Address |
| dst-mac | Type: ethernet |
| src-ip | Source IPv4 address |
| src-ip | Type: ipaddr |
| src-ipv6 | Source IPv6 address |
| src-ipv6 | Type: ipv6addr |
| dst-ip | Destination IPv4 address |
| dst-ip | Type: ipaddr |
| dst-ipv6 | Destination IPv6 address |
| dst-ipv6 | Type: ipv6addr |
| src-port | Source L4 port |
| src-port | Type: integer |
| dst-port | Destination l4 port |
| dst-port | Type: integer |
| __readonly__ | |
| module | |
| module_num | Type: integer |
| rbh | Type: integer |
Command Modes
- /exec
show hardware ip verify
show hardware [forwarding] ip verify [ module module ] [ __readonly__ info_str ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| forwarding | Show hardware information for forwarding path |
| ip | IP Not available in this release. |
| verify | Show IP packet verification checks enabled in hardware Not available in this release. |
| module | Specify a module number |
| module | Type: integer Specify a module number |
| __readonly__ | |
| info_str | Type: string IDS Check Stats |
Command Modes
- /exec
show hardware mac address-table
show hardware mac address-table module [ static | dynamic ] [ address mac-addr | interface interface-name | vlan id | vdc vdc | fe feid ] + [ bd bd_id ] [ __readonly__ l2entry header ]
Syntax Description
| show | show |
| hardware | Show hardware information |
| mac | MAC configuration commands |
| address-table | MAC Address Table |
| module | Type: integer min: 1 max: 16 Module Number |
| static | Display Static Entries |
| dynamic | Display Dynamic Entries |
| address | address |
| mac-addr | Type: ethernet MAC Address |
| interface | Interface |
| interface-name | Type: interface Interface name |
| vlan | VLAN |
| id | Type: integer min: 1 max: 4094 VLAN ID |
| vdc | VDC ID |
| vdc | Type: integer min: 1 max: 16 VDC ID value |
| fe | Forwarding Engine Instance ID(Zero based) |
| feid | Type: integer min: 0 max: 15 FE ID value |
| bd | Bridge Domain |
| bd_id | Type: integer min: 1 max: 16384 BD ID value |
| __readonly__ | |
| header | Type: string Header |
| l2entry | Type: string L2 Entry String |
Command Modes
- /exec
show hardware qos eoq stats-class
show hardware qos eoq stats-class [ module module ] [ __readonly__ TABLE_qos_eoq_stats_class module eoq-stats-class-desc ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| qos | Show QoS related information |
| eoq | Show Extended Output Queue(EOQ) related information |
| stats-class | Show EOQ Statistics class selection config |
| module | Specify a module number Not available in this release. |
| module | Type: integer Specify a module number |
| __readonly__ | |
| TABLE_qos_eoq_stats_class | the xml qos_eoq_stats_class configuration |
| eoq-stats-class-desc | Type: string selected class description |
Command Modes
- /exec
show hardware qos ns-buffer-profile
show hardware qos ns-buffer-profile [ module module ] [ __readonly__ TABLE_qos_ns_buffer_profile module buff-prof-desc ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| qos | Show qos related information |
| ns-buffer-profile | Show ns-buffer-profile config |
| module | Specify a module number Not available in this release. |
| module | Type: integer Specify a module number |
| __readonly__ | |
| TABLE_qos_ns_buffer_profile | the xml qos_ns_buffer_profile configuration |
| buff-prof-desc | Type: string buffer profile description |
Command Modes
- /exec
show hardware qos ns-mcq3-alias
show hardware qos ns-mcq3-alias [ module module ] [ __readonly__ TABLE_qos_ns_mcq3_alias module ns-mcq3-alias-desc ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| qos | Show QoS related information |
| ns-mcq3-alias | Show NS mc-queue-3 alias class selection config Available only in the 9300 series. |
| module | Specify a module number Not available in this release. |
| module | Type: integer Specify a module number |
| __readonly__ | |
| TABLE_qos_ns_mcq3_alias | the xml qos_ns_mcq3_alias configuration |
| ns-mcq3-alias-desc | Type: string selected class description |
Command Modes
- /exec
show hardware rate-limiter
show hardware rate-limiter [ module module ] [ layer-3 { l3-opts | multicast mcast-opts } | layer-2 l2-opts | opts | f1 f1-opts ] [ __readonly__ TABLE_hardware_rate_limiter rate-limit-class class-descr module rate-limit-configured rate-limit-allowed rate-limit-dropped rate-limit-total ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| rate-limiter | Show Rate-Limiter configs and statistics |
| layer-3 | Layer-3 control and Routed packets |
| l3-opts |
|
| multicast | Multicast data packets |
| mcast-opts |
|
| layer-2 | Layer-2 control and Bridged packets Not available in this release. |
| l2-opts |
|
| opts |
|
| f1 | Control packets from F1 modules to supervisor Not available in this release. |
| f1-opts |
|
| module | Specify a module number |
| module | Type: integer Specify a module number |
| __readonly__ | |
| TABLE_hardware_rate_limiter | the xml Rate-Limiter configuration and statistics |
| rate-limit-class | Type: integer the xml rate limiter class |
| class-descr | Type: string class description |
| module | Type: integer the xml module number |
| rate-limit-configured | Type: integer the xml rate-limit-configured |
| rate-limit-allowed | Type: longlong the xml rate-limit-allowed |
| rate-limit-dropped | Type: longlong the xml rate-limit-dropped |
| rate-limit-total | Type: longlong the xml rate-limit-total |
Command Modes
- /exec
show hardware rl snmp class-id
show hardware rl snmp class-id class-id [ __readonly__ TABLE-classRateLimiterTable class-id-out class-descr ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| rl | Show Rate-Limiter configs and statistics |
| snmp | Show Rate-Limiter snmp information |
| class-id | rate-limiter class-id |
| class-id | Type: integer rate-limiter class |
| __readonly__ | |
| TABLE-classRateLimiterTable | Class Rate Limiter Table |
| class-id-out | Type: integer class if out |
| class-descr | Type: string class description |
Command Modes
- /exec
show hardware rl snmp global class-id
show hardware rl snmp global class-id class-id [ __readonly__ TABLE-globalRateLimiterTable class-id-out rate-limit-configured rate-limit-allowed rate-limit-dropped rate-limit-total ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| rl | Show Rate-Limiter configs and statistics |
| snmp | Show Rate-Limiter snmp information |
| global | Show Global information |
| class-id | rate-limiter class-id |
| class-id | Type: integer rate-limiter class |
| __readonly__ | |
| TABLE-globalRateLimiterTable | Global Rate Limiter Table |
| class-id-out | Type: integer class if out |
| rate-limit-configured | Type: integer rate-limit-configured |
| rate-limit-allowed | Type: longlong rate-limit-allowed |
| rate-limit-dropped | Type: longlong rate-limit-dropped |
| rate-limit-total | Type: longlong rate-limit-total |
Command Modes
- /exec
show hardware rl snmp local snmp-index class-id
show hardware rl snmp local snmp-index snmp-index class-id class-id [ __readonly__ TABLE-localRateLimiterTable snmp-index-out class-id-out rate-limit-configured rate-limit-configured-source rate-limit-allowed rate-limit-dropped rate-limit-total ]
Syntax Description
| show | Show running system information |
| hardware | Show hardware information |
| rl | Show Rate-Limiter configs and statistics |
| snmp | Show Rate-Limiter snmp information |
| local | Show Local information |
| snmp-index | snmp physical index |
| snmp-index | Type: integer physical index |
| class-id | rate-limiter class-id |
| class-id | Type: integer rate-limiter class |
| __readonly__ | |
| TABLE-localRateLimiterTable | Local Rate Limiter Table |
| snmp-index-out | Type: integer snmp index out |
| class-id-out | Type: integer class if out |
| rate-limit-configured | Type: integer rate-limit-configured |
| rate-limit-configured-source | Type: integer rate-limit-configured-source |
| rate-limit-allowed | Type: longlong rate-limit-allowed |
| rate-limit-dropped | Type: longlong rate-limit-dropped |
| rate-limit-total | Type: longlong rate-limit-total |
Command Modes
- /exec
show hosts
show hosts [ __readonly__ [dnslookup] [dnsnameservice] [ TABLE_vrf vrfname [defaultdomains] [additionaldomainserver] [domainservers] [nameservice] [dhcpdomains] [dhcpdomainservers] ] [ TABLE_dnsconfigvrf dnsvrfname [usevrf] [token] [ TABLE_dnsconfigvrfconfig config ] ] [ TABLE_hosts host [address] ] ]
Syntax Description
| show | Show running system information |
| hosts | Show information about DNS |
| __readonly__ | |
| dnslookup | Type: string dns lookup enable status |
| dnsnameservice | Type: string name service |
| TABLE_vrf | vrf domain servers |
| vrfname | Type: string vrf name |
| defaultdomains | Type: string default domain |
| additionaldomainserver | Type: string additionaldomain |
| domainservers | Type: string domain server |
| nameservice | Type: string name service |
| dhcpdomains | Type: string dhcp domains |
| dhcpdomainservers | Type: string dhcpservers |
| TABLE_dnsconfigvrf | dns config vrf |
| dnsvrfname | Type: string vrfname |
| usevrf | Type: string usevrf |
| token | Type: string token |
| TABLE_dnsconfigvrfconfig | dns config vrf config |
| config | Type: string token |
| TABLE_hosts | all configured dns hosts |
| host | Type: string xml host information |
| address | Type: string xml address information |
Command Modes
- /exec
show hsrp
show hsrp [ interface interface-id ] [ group group-number ] [ active | init | learn | listen | speak | standby ] + [all] [ brief [all] | detail ] [ ipv4 | ipv6 ] [ __readonly__ show_hsrp_start TABLE_grp_detail sh_if_index sh_group_num sh_group_type sh_group_version sh_group_state sh_state_reason sh_prio sh_cfg_prio sh_fwd_lower_threshold sh_fwd_upper_threshold sh_can_forward sh_preempt sh_preempt_min_delay sh_preempt_min_delay_active sh_preempt_reload_delay sh_preempt_reload_delay_active sh_preempt_sync_delay sh_preempt_sync_delay_active sh_cur_hello sh_cur_hello_attr sh_cfg_hello sh_cfg_hello_attr sh_active_hello sh_cur_hold sh_cur_hold_attr sh_cfg_hold sh_cfg_hold_attr sh_vip sh_vip_v6 sh_vip_attr sh_num_vip_sec TABLE_grp_vip_sec sh_vip_sec sh_vip_sec_v6 sh_active_router_addr sh_active_router_addr_v6 sh_active_router_prio sh_active_router_timer sh_standby_router_addr sh_standby_router_addr_v6 sh_standby_router_prio sh_authentication_type sh_authentication_data sh_keystring_attr sh_keystring_timeout sh_keystring_cur_valid sh_vmac sh_vmac_attr sh_num_of_state_changes sh_last_state_change sh_num_of_total_state_changes sh_last_total_state_change sh_num_track_obj TABLE_grp_track_obj sh_track_obj sh_track_obj_state sh_track_obj_prio sh_ip_redund_name sh_ip_redund_name_attr show_hsrp_end ]
Syntax Description
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| interface | Groups on this interface |
| interface-id | Type: interface Interface |
| active | Groups in active state |
| init | Groups in init state |
| listen | Groups in listen state |
| standby | Groups in standby state |
| learn | Groups in learn state |
| speak | Groups in speak state |
| group | Group number |
| group-number | Type: integer min: 0 max: 4095 Group Number |
| all | Include groups in disabled state |
| brief | Brief output |
| detail | Detailed output |
| ipv4 | HSRP V4 Groups |
| ipv6 | HSRP V6 Groups |
| all | Display all VIPs |
| __readonly__ | Read only |
| show_hsrp_start | Type: uinteger Show hsrp start |
| TABLE_grp_detail | Group table detail |
| sh_if_index | Type: interface Interface type and number |
| sh_group_num | Type: uinteger Group number |
| sh_group_state |
HSRP state
|
| sh_state_reason | Type: string Reason |
| sh_group_type |
Group type
|
| sh_group_version |
Group version
|
| sh_prio | Type: uinteger Priority |
| sh_cfg_prio | Type: uinteger Configured priority |
| sh_fwd_lower_threshold | Type: uinteger Lower threshold value |
| sh_fwd_upper_threshold | Type: uinteger Upper threhsold value |
| sh_can_forward | Type: bool Current forwarding status |
| sh_preempt | Type: bool Preemption enabled/not |
| sh_preempt_min_delay | Type: uinteger Preemption min delay |
| sh_preempt_min_delay_active | Type: uinteger Active preemption min delay |
| sh_preempt_reload_delay | Type: uinteger Preemption reload delay |
| sh_preempt_reload_delay_active | Type: uinteger Active preemption reload delay |
| sh_preempt_sync_delay | Type: uinteger Preemption sync delay |
| sh_preempt_sync_delay_active | Type: uinteger Active preemption sync delay |
| sh_cur_hello | Type: uinteger Current hello time |
| sh_cur_hello_attr |
Hello time in ms/not
|
| sh_cfg_hello | Type: uinteger Configured hello time |
| sh_cfg_hello_attr |
Hello time in ms/not
|
| sh_active_hello | Type: string Active hello time |
| sh_cur_hold | Type: uinteger Current hold time |
| sh_cur_hold_attr |
Hello time in ms/not
|
| sh_cfg_hold | Type: uinteger Configured hold time |
| sh_cfg_hold_attr |
Hello time in ms/not
|
| sh_vip | Type: ipaddr Virtual IP address |
| sh_vip_v6 | Type: ipv6addr Virtual IPv6 address |
| sh_vip_attr |
Virtual IP address attribute
|
| sh_num_vip_sec | Type: uinteger Number of Secondary virtual IP address |
| TABLE_grp_vip_sec | Group secondary ip address |
| sh_vip_sec | Type: ipaddr Secondary virtual IP address |
| sh_vip_sec_v6 | Type: ipv6addr Gropu secondary ipv6 address |
| sh_active_router_addr | Type: ipaddr Active router address |
| sh_active_router_addr_v6 | Type: ipv6addr Active router V6 address |
| sh_active_router_prio | Type: uinteger Active router priority |
| sh_active_router_timer | Type: string Active router expiry timer |
| sh_standby_router_addr | Type: ipaddr Standby router address |
| sh_standby_router_addr_v6 | Type: ipv6addr Standby router V6 address |
| sh_standby_router_prio | Type: uinteger Standby router priority |
| sh_authentication_type |
Authentication type
|
| sh_authentication_data | Type: string Authentication data |
| sh_keystring_attr |
Keystring attribute
|
| sh_keystring_timeout | Type: uinteger Keystring timeout |
| sh_keystring_cur_valid | Type: string Keystring current valid time |
| sh_vmac | Type: ethernet Virtual MAC |
| sh_vmac_attr |
Virtual MAC attribute
|
| sh_num_of_state_changes | Type: uinteger Number of state changes |
| sh_last_state_change | Type: uinteger Last state change time |
| sh_num_of_total_state_changes | Type: uinteger Number of total state changes |
| sh_last_total_state_change | Type: uinteger Last total state change time |
| sh_num_track_obj | Type: uinteger Number of tracked objects |
| TABLE_grp_track_obj | Group tracked objects |
| sh_track_obj | Type: uinteger Tracked object |
| sh_track_obj_state |
State of tracked object
|
| sh_track_obj_prio | Type: uinteger Tracked object priority decrement |
| sh_ip_redund_name | Type: string IP redundancy name |
| sh_ip_redund_name_attr |
IP redundancy name attribute
|
| show_hsrp_end | Type: uinteger End of Group |
Command Modes
- /exec
show hsrp bfd-sessions
show hsrp bfd-sessions [ interface interface-id [ to ipaddress ] ] [ __readonly__ TABLE_bfd_sess interface list_size { src_addr | src_addr_v6 } { dst_addr | dst_addr_v6 } ref_count TABLE_ref_groups ref_group_id TABLE_hist_groups hist_group_id hist_operation hist_rel_time hist_abs_time hist_ref_count hist_group_state hist_status hist_op_reason ]
Syntax Description
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| bfd-sessions | BFD sessions |
| interface | Groups on this interface |
| interface-id | Type: interface Interface |
| to | To IP address |
| ipaddress | Type: ipaddr Sessions to IP address |
| __readonly__ | |
| TABLE_bfd_sess | |
| interface | Type: interface Interface |
| list_size | Type: uinteger List size |
| src_addr | Type: ipaddr IPv4 Source address |
| dst_addr | Type: ipaddr IPv4 Destination address |
| src_addr_v6 | Type: ipv6addr IPv6 Source address |
| dst_addr_v6 | Type: ipv6addr IPv6 Destination address |
| ref_count | Type: uinteger Ref count |
| TABLE_ref_groups | |
| ref_group_id | Type: uinteger Group id |
| TABLE_hist_groups | |
| hist_group_id | Type: uinteger Group id |
| hist_operation | Type: string Operation |
| hist_rel_time | Type: string Relative time |
| hist_abs_time | Type: string Absolute time |
| hist_ref_count | Type: uinteger Ref count |
| hist_group_state | Type: string Group state |
| hist_status | Type: string Status |
| hist_op_reason | Type: string Op reason |
Command Modes
- /exec
show hsrp delay
show hsrp delay [ interface interface-id ] [ __readonly__ TABLE_delay interface min_delay reload_delay ]
Syntax Description
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| delay | Group initialisation delay |
| interface | Groups on this interface |
| interface-id | Type: interface Interface |
| __readonly__ | |
| TABLE_delay | |
| interface | Type: interface Interface |
| min_delay | Type: uinteger Min delay |
| reload_delay | Type: uinteger Reload delay |
Command Modes
- /exec
show hsrp ext-mib sec-addr
show hsrp ext-mib sec-addr [ ifindex-in group-id-in ip1-in ip2-in ip3-in ip4-in ] [ __readonly__ TABLE_cHsrpExtSecAddrTable ifindex-out group-id-out ip1-out ip2-out ip3-out ip4-out cHsrpExtSecAddrTable cHsrpExtSecAddrAddress cHsrpExtSecAddrRowStatus ]
Syntax Description
| __readonly__ | Read Only |
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| ext-mib | Show hsrp extended mib specific configuration |
| sec-addr | Secondary virtual address |
| ifindex-in | Type: uinteger hsrp group ifindex |
| group-id-in | Type: uinteger hsrp group id |
| group-id-out | Type: uinteger hsrp group num |
| ifindex-out | Type: uinteger hsrp group interface index |
| ip1-in | Type: uinteger first part of vip |
| ip2-in | Type: uinteger second part of vip |
| ip3-in | Type: uinteger third part of vip |
| ip4-in | Type: uinteger fourth part of vip |
| ip1-out | Type: uinteger first part of vip out |
| ip2-out | Type: uinteger second part of vip out |
| ip3-out | Type: uinteger third part of vip out |
| ip4-out | Type: uinteger fourth part of vip out |
| TABLE_cHsrpExtSecAddrTable | Hsrp extended mib secondary address table |
| cHsrpExtSecAddrTable | Type: uinteger Hsrp extended mib Secondary address table |
| cHsrpExtSecAddrAddress | Type: uinteger Hsrp extended mib Secondary Address |
| cHsrpExtSecAddrRowStatus | Type: uinteger Hsrp extended mib secondary address row status |
Command Modes
- /exec
show hsrp ext-mib use-bia
show hsrp ext-mib use-bia [ifindex-in] [ __readonly__ TABLE_cHsrpExtIfEntry ifindex-out cHsrpExtIfUseBIA cHsrpExtIfRowStatus ]
Syntax Description
| __readonly__ | Read Only |
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| ext-mib | Show hsrp extended mib specific configuration |
| use-bia | Use BIA |
| ifindex-in | Type: uinteger hsrp group ifindex |
| ifindex-out | Type: uinteger hsrp group ifindex |
| TABLE_cHsrpExtIfEntry | Use BIA info table |
| cHsrpExtIfUseBIA | Type: uinteger Use BIA enabled |
| cHsrpExtIfRowStatus | Type: uinteger Use BIA row status |
Command Modes
- /exec
show hsrp summary
show hsrp summary [ __readonly__ switchover_notify_rxed bfd_enabled num_of_groups num_of_v4_v1_groups num_of_v4_v2_groups num_of_v6_v2_groups num_of_active_groups num_of_standby_groups num_of_listen_groups num_of_v6_active_groups num_of_v6_standby_groups num_of_v6_listen_groups num_of_hsrp_enabled_ifs counter_pkts_tx counter_pkts_tx_failure counter_pkts_in counter_pkts_bad_vr counter_mts_rx ]
Syntax Description
| show | Show running system information |
| hsrp | Hot Standby Router Protocol (HSRP) information |
| summary | Show HSRP summary |
| __readonly__ | |
| switchover_notify_rxed | Type: string Switchover notification received (1 => active) |
| bfd_enabled | Type: string BFD status |
| num_of_groups | Type: uinteger Total number of groups |
| num_of_v4_v1_groups | Type: uinteger Number of IPv4 V1 groups |
| num_of_v4_v2_groups | Type: uinteger Number of IPv4 V2 groups |
| num_of_v6_v2_groups | Type: uinteger Number of IPv6 V2 groups |
| num_of_active_groups | Type: uinteger Number of active groups |
| num_of_standby_groups | Type: uinteger Number of standby groups |
| num_of_listen_groups | Type: uinteger Number of listen groups |
| num_of_v6_active_groups | Type: uinteger Number of IPv6 active groups |
| num_of_v6_standby_groups | Type: uinteger Number of IPv6 standby groups |
| num_of_v6_listen_groups | Type: uinteger Number of IPv6 listen groups |
| num_of_hsrp_enabled_ifs | Type: uinteger Number of HSRP enabled interfaces |
| counter_pkts_tx | Type: uinteger Number of packet transmission successes |
| counter_pkts_tx_failure | Type: uinteger Number of packet transmission failure |
| counter_pkts_in | Type: uinteger Number of packets received successfully |
| counter_pkts_bad_vr | Type: uinteger Number of packets for unknown groups |
| counter_mts_rx | Type: uinteger Number of MTS messages received |
Command Modes
- /exec
Feedback