- Preface
- READ ME FIRST
- A Show Commands
- B Show Commands
- C Show Commands
- D Show Commands
- E Show Commands
- F Show Commands
- G Show Commands
- H Show Commands
- I Show Commands
- K Show Commands
- L Show Commands
- M Show Commands
- N Show Commands
- O Show Commands
- P Show Commands
- Q Show Commands
- R Show Commands
- S Show Commands
- T Show Commands
- U Show Commands
- V Show Commands
- X Show Commands
- Index
- show fabricpath counters dropped
- show fabricpath load-balance
- show fabricpath load-balance multicast ftag-selected flow-type
- show fabricpath load-balance unicast forwarding-path ftag switchid flow-type
- show fabricpath topology
- show fabricpath topology interface
- show fabricpath topology interface vlan
- show fabricpath topology vlan
- show feature
- show feature-set
- show feature-set services
- show fex (satmgr)
- show fex (satmgr)
- show fex detail
- show fex transceiver
- show fex version
- show file
- show fips status
- show forwarding
- show forwarding adjacency
- show forwarding bypass-hardware
- show forwarding capture
- show forwarding distribution
- show forwarding distribution capture
- show forwarding distribution clients
- show forwarding distribution fib-state
- show forwarding distribution ip igmp snooping
- show forwarding distribution ipv6 multicast route
- show forwarding distribution l2 multicast
- show forwarding distribution lisp counters
- show forwarding distribution lisp vrf enabled
- show forwarding distribution logging
- show forwarding distribution multicast (mfdm)
- show forwarding distribution multicast (mfdm)
- show forwarding distribution multicast client-ack-db
- show forwarding distribution multicast client
- show forwarding distribution multicast outgoing-interface-list
- show forwarding distribution multicast resp-ack-timer-msgs
- show forwarding distribution multicast route
- show forwarding distribution otv multicast route
- show forwarding distribution peer-id
- show forwarding distribution trace
- show forwarding ecmp
- show forwarding ecmp recursive
- show forwarding file-log disable
- show forwarding file-log enable
- show forwarding interfaces
- show forwarding ipv6
- show forwarding ipv6 adjacency
- show forwarding ipv6 multicast route
- show forwarding ipv6 pss route
- show forwarding l2 multicast
- show forwarding l2vpn ipv6 multicast route
- show forwarding l2vpn label vpls
- show forwarding l2vpn label xconnect
- show forwarding l2vpn multicast outgoing-interface-list
- show forwarding l2vpn multicast route
- show forwarding l2vpn service vpls
- show forwarding l2vpn service xconnect
- show forwarding l2vpn vlan
- show forwarding mpls
- show forwarding mpls aggregate
- show forwarding mpls cbts
- show forwarding mpls ecmp
- show forwarding mpls summary
- show forwarding mpls te
- show forwarding multicast outgoing-interface-list
- show forwarding multicast route
- show forwarding otv
- show forwarding otv ipv6 multicast route
- show forwarding otv multicast outgoing-interface-list
- show forwarding otv multicast route
- show forwarding otv vlan
- show forwarding pss route
- show forwarding restart
- show forwarding security group-tag
- show forwarding security mac
- show forwarding trace
- show forwarding trace profile
- show forwarding trace profile funcstats
F Show Commands
- show fabricpath counters dropped
- show fabricpath load-balance
- show fabricpath load-balance multicast ftag-selected flow-type
- show fabricpath load-balance unicast forwarding-path ftag switchid flow-type
- show fabricpath topology
- show fabricpath topology interface
- show fabricpath topology interface vlan
- show fabricpath topology vlan
- show feature
- show feature-set
- show feature-set services
- show fex (satmgr)
- show fex (satmgr)
- show fex detail
- show fex transceiver
- show fex version
- show file
- show fips status
- show forwarding
- show forwarding adjacency
- show forwarding bypass-hardware
- show forwarding capture
- show forwarding distribution
- show forwarding distribution capture
- show forwarding distribution clients
- show forwarding distribution fib-state
- show forwarding distribution ip igmp snooping
- show forwarding distribution ipv6 multicast route
- show forwarding distribution l2 multicast
- show forwarding distribution lisp counters
- show forwarding distribution lisp vrf enabled
- show forwarding distribution logging
- show forwarding distribution multicast (mfdm)
- show forwarding distribution multicast (mfdm)
- show forwarding distribution multicast client-ack-db
- show forwarding distribution multicast client
- show forwarding distribution multicast outgoing-interface-list
- show forwarding distribution multicast resp-ack-timer-msgs
- show forwarding distribution multicast route
- show forwarding distribution otv multicast route
- show forwarding distribution peer-id
- show forwarding distribution trace
- show forwarding ecmp
- show forwarding ecmp recursive
- show forwarding file-log disable
- show forwarding file-log enable
- show forwarding interfaces
- show forwarding ipv6
- show forwarding ipv6 adjacency
- show forwarding ipv6 multicast route
- show forwarding ipv6 pss route
- show forwarding l2 multicast
- show forwarding l2vpn ipv6 multicast route
- show forwarding l2vpn label vpls
- show forwarding l2vpn label xconnect
- show forwarding l2vpn multicast outgoing-interface-list
- show forwarding l2vpn multicast route
- show forwarding l2vpn service vpls
- show forwarding l2vpn service xconnect
- show forwarding l2vpn vlan
- show forwarding mpls
- show forwarding mpls aggregate
- show forwarding mpls cbts
- show forwarding mpls ecmp
- show forwarding mpls summary
- show forwarding mpls te
- show forwarding multicast outgoing-interface-list
- show forwarding multicast route
- show forwarding otv
- show forwarding otv ipv6 multicast route
- show forwarding otv multicast outgoing-interface-list
- show forwarding otv multicast route
- show forwarding otv vlan
- show forwarding pss route
- show forwarding restart
- show forwarding security group-tag
- show forwarding security mac
- show forwarding trace
- show forwarding trace profile
- show forwarding trace profile funcstats
show fabricpath counters dropped
show fabricpath counters dropped [ module module ] [ __readonly__ mod_bmp vdc_id msg is_brief ]
Syntax Description
| show | Show running system information |
| fabricpath | fabricpath information |
| counters | Show fabricpath counters |
| dropped | Packets dropped due to various vlan errors |
| module | Specify one module |
| module | Type: integer Module number |
| __readonly__ | Read Only |
| mod_bmp | Type: uinteger Bitmap of valid modules |
| vdc_id | Type: integer Current VDC id |
| msg | Type: string Message to give details about command execution |
| is_brief | Type: bool Show summary for all modules or show counter for each module instance |
Command Modes
- /exec
show fabricpath load-balance
show fabricpath load-balance [ __readonly__ is_mcast algo [pref] rotate_amount use_vlan xor_warn ]
Syntax Description
| show | Show running system information |
| fabricpath | fabricpath information |
| load-balance | Show FabricPath load-balance information |
| __readonly__ | Read Only |
| is_mcast | Type: uinteger Is mcast config |
| algo | Type: uinteger Hash type used |
| pref | Type: uinteger Layer preference |
| rotate_amount | Type: uinteger Rotate ammount |
| use_vlan | Type: uinteger Use VLAN in hash |
| xor_warn | Type: string XOR Warning |
Command Modes
- /exec
show fabricpath load-balance multicast ftag-selected flow-type
show fabricpath load-balance multicast ftag-selected flow-type { l2 { dst-mac dst-mac | src-mac src-mac } + ether-type ether-type | l3 { dst-ip dst-ip | src-ip src-ip | dst-ipv6 dst-ipv6 | src-ipv6 src-ipv6 } + | l4 { l4-src-port l4-src-port | l4-dst-port l4-dst-port } + [ dst-ip dst-ip | src-ip src-ip | dst-ipv6 dst-ipv6 | src-ipv6 src-ipv6 | l4-src-port l4-src-port | l4-dst-port l4-dst-port ] + } vlan vlan module mod-no [ __readonly__ cmd_string is_dce_module ]
Syntax Description
| show | Show running system information |
| fabricpath | fabricpath information |
| load-balance | Show FabricPath load-balance information |
| multicast | Show FabricPath multicast load-balance infomation |
| ftag-selected | ftag information |
| module | Ingress module at Fabricpath edge |
| mod-no | Type: uinteger module number |
| flow-type | indicate flow type as L2 or L3 or L4 |
| l4 | indicate Layer 4 flow |
| l3 | indicate Layer 3 flow |
| l2 | indicate Layer 2 flow |
| dst-mac | Destination MAC Address |
| dst-mac | Type: ethernet Mac Address |
| src-mac | Source MAC Address |
| src-mac | Type: ethernet Mac Address |
| vlan | Virtual LAN |
| vlan | Type: uinteger VLAN id |
| ether-type | Ether Type |
| ether-type | Type: uinteger Ether Type id |
| dst-ip | Destination IPv4 address |
| dst-ip | Type: ipaddr Destination IP address in format i.i.i.i |
| src-ip | Source IPv4 address |
| src-ip | Type: ipaddr Source IP address in format i.i.i.i |
| dst-ipv6 | Destination IPv6 address |
| dst-ipv6 | Type: ipv6addr Destination IPv6 address in format i:i:i:i:i:i |
| src-ipv6 | Source IPv6 address |
| src-ipv6 | Type: ipv6addr Source IPv6 address in format i:i:i:i:i:i |
| l4-src-port | Source L4 port |
| l4-src-port | Type: integer min: 0 max: 65535 L4 port number |
| l4-dst-port | Destination l4 port |
| l4-dst-port | Type: integer min: 0 max: 65535 L4 port number |
| __readonly__ | Read Only |
| cmd_string | Type: string Command String |
| is_dce_module | Type: bool Whether Module is DCE |
Command Modes
- /exec
- /exec
show fabricpath load-balance unicast forwarding-path ftag switchid flow-type
show fabricpath load-balance unicast forwarding-path ftag ftag switchid swid flow-type { l2 { dst-mac dst-mac | src-mac src-mac } + ether-type ether-type | l3 { dst-ip dst-ip | src-ip src-ip | dst-ipv6 dst-ipv6 | src-ipv6 src-ipv6 } + | l4 { l4-src-port l4-src-port | l4-dst-port l4-dst-port } + [ dst-ip dst-ip | src-ip src-ip | dst-ipv6 dst-ipv6 | src-ipv6 src-ipv6 | l4-src-port l4-src-port | l4-dst-port l4-dst-port ] + } [ vlan vlan ] module mod-no [ __readonly__ cmd_string is_dce_module ]
Syntax Description
| show | Show running system information |
| fabricpath | fabricpath information |
| load-balance | Show FabricPath load-balance information |
| unicast | Show FabricPath unicast load-balance information |
| forwarding-path | forwarding-path |
| module | Ingress module |
| mod-no | Type: uinteger module number |
| ftag | ftag |
| ftag | Type: uinteger min: 0 max: 1023 ftag |
| switchid | switchid |
| swid | Type: uinteger min: 0 max: 16383 switch id |
| flow-type | indicate flow type as L2 or L3 or L4 |
| l4 | indicate Layer 4 flow |
| l3 | indicate Layer 3 flow |
| l2 | indicate Layer 2 flow |
| src-mac | Source MAC Address |
| src-mac | Type: ethernet Mac Address |
| dst-mac | Destination MAC Address |
| dst-mac | Type: ethernet Mac Address |
| vlan | Virtual LAN |
| vlan | Type: uinteger VLAN id |
| ether-type | Ether Type |
| ether-type | Type: uinteger Ether Type id |
| src-ip | Source IPv4 address |
| src-ip | Type: ipaddr Source IP address in format i.i.i.i |
| dst-ip | Destination IPv4 address |
| dst-ip | Type: ipaddr Destination IP address in format i.i.i.i |
| src-ipv6 | Source IPv6 address |
| src-ipv6 | Type: ipv6addr Source IPv6 address in format i:i:i:i:i:i |
| dst-ipv6 | Destination IPv6 address |
| dst-ipv6 | Type: ipv6addr Destination IPv6 address in format i:i:i:i:i:i |
| l4-src-port | Source L4 port |
| l4-src-port | Type: integer min: 0 max: 65535 L4 port number |
| l4-dst-port | Destination l4 port |
| l4-dst-port | Type: integer min: 0 max: 65535 L4 port number |
| __readonly__ | Read Only |
| cmd_string | Type: string Command String |
| is_dce_module | Type: bool Whether Module is DCE |
Command Modes
- /exec
- /exec
show fabricpath topology
show fabricpath topology [detail] [passive] [ __readonly__ TABLE_tpg name id state [ reason pend ] ]
Syntax Description
| show | Show running system information |
| fabricpath | Configure fabricpath topology |
| topology | Configure fabricpath topology |
| detail | Detailed information |
| passive | Detailed passive topology information |
| __readonly__ | |
| TABLE_tpg | |
| name | Type: string |
| id | Type: uinteger |
| state | Type: string |
| reason | Type: string |
| pend | Type: bool |
Command Modes
- /exec
show fabricpath topology interface
show fabricpath topology [tpg-id] interface [ interface | all ] [ __readonly__ TABLE_tpg_if if_name tpg_name tpg_id tpg_if_state ]
Syntax Description
| show | Show running system information |
| fabricpath | Configure fabricpath topology |
| topology | Configure fabricpath topology |
| tpg-id | Type: integer min: 0 max: 63 Fabricpath Topology ID 0-63 |
| interface | Display interface topology information |
| interface | Type: interface Display interface topology information |
| all | Display all DCE and non-DCE interfaces |
| __readonly__ | |
| TABLE_tpg_if | |
| if_name | Type: string |
| tpg_name | Type: string |
| tpg_id | Type: uinteger |
| tpg_if_state | Type: string |
Command Modes
- /exec
show fabricpath topology interface vlan
show fabricpath topology interface [ interface | all ] vlan [active] [ __readonly__ TABLE_if_vlan if_name tpg_name tpg_id vlan_range ]
Syntax Description
| show | Show running system information |
| fabricpath | Configure fabricpath topology |
| topology | Configure fabricpath topology |
| interface | Display interface topology information |
| interface | Type: interface Display interface topology information |
| all | Display all DCE and non-DCE interfaces |
| vlan | Show vlans configured on the interface |
| active | Show active vlans |
| __readonly__ | |
| TABLE_if_vlan | |
| if_name | Type: string |
| tpg_name | Type: string |
| tpg_id | Type: uinteger |
| vlan_range | Type: vlan-mrange |
Command Modes
- /exec
show fabricpath topology vlan
show fabricpath topology [tpg-id] vlan [active] [ __readonly__ TABLE_tpg_vlan tpg_name tpg_id vlan_range ]
Syntax Description
| show | Show running system information |
| fabricpath | Configure fabricpath topology |
| topology | Configure fabricpath topology |
| tpg-id | Type: integer min: 0 max: 63 Fabricpath Topology ID 0-63 |
| vlan | VLANS in a L2 topology |
| active | Shows all active VLANs of the L2 topology |
| __readonly__ | |
| TABLE_tpg_vlan | |
| tpg_name | Type: string |
| tpg_id | Type: uinteger |
| vlan_range | Type: vlan-mrange |
Command Modes
- /exec
show feature
show feature [ __readonly__ [ TABLE_cfcFeatureCtrlTable cfcFeatureCtrlName2 cfcFeatureCtrlInstanceNum2 cfcFeatureCtrlOpStatus2 ] ]
Syntax Description
| show | Show running system information |
| feature | Show feature status |
| __readonly__ | |
| TABLE_cfcFeatureCtrlTable | feature table |
| cfcFeatureCtrlName2 | Type: string feature |
| cfcFeatureCtrlInstanceNum2 | Type: integer instance number |
| cfcFeatureCtrlOpStatus2 | Type: string operation status |
Command Modes
- /exec
show feature-set
show feature-set [ name | id ] [ __readonly__ TABLE-cfcFeatureSetTable name-out id-out cfcFeatureSetName cfcFeatureSetAction cfcFeatureSetLastAction cfcFeatureSetLastActionResult cfcFeatureSetLastFailureReason cfcFeatureSetOpStatus cfcFeatureSetOpStatusReason ]
Syntax Description
| show | Show running system information |
| feature-set | Show feature set status |
| name | Type: string feature-set name |
| name-out | Type: string feature-set name |
| id | Type: integer feature-set id |
| __readonly__ | |
| TABLE-cfcFeatureSetTable | feature-set table |
| id-out | Type: integer feature-set table index |
| cfcFeatureSetName | Type: string feature-set name |
| cfcFeatureSetAction | Type: integer action |
| cfcFeatureSetLastAction | Type: integer last action |
| cfcFeatureSetLastActionResult | Type: integer last action result |
| cfcFeatureSetLastFailureReason | Type: string last failure reason |
| cfcFeatureSetOpStatus | operation status
|
| cfcFeatureSetOpStatusReason | Type: string operation status |
Command Modes
- /exec
show feature-set services
show feature-set services s0 [ __readonly__ TABLE_services service_name count feature_set ]
Syntax Description
| show | Show running system information |
| feature-set | Show feature set status |
| services | Show services in feature set |
| __readonly__ | |
| TABLE_services | all service names in feature set |
| service_name | Type: string name of the service |
| count | Type: integer number of services in the feature set |
| feature_set | Type: string feature set name |
| s0 | Type: string Name of feature set |
Command Modes
- /exec
show fex (satmgr)
show fex chas_no [ detail | ports | event-history ] [ __readonly__ TABLE_fex_info chas_id descr fex_state fex_ver sw_ver fex_interim_ver sw_interim_ver model serial part_no card_id mac num_macs bay rack enclosure enclosure_ser rack_id fex_sw_gen sw_sw_gen pin_mode max_link post_level fbr_port_control TABLE_fbr_state fbr_index fbr_oper_state fsm_state TABLE_fex_port fex_port fex_port_oper_state fbr_port primary_fabric TABLE_logs log ]
Syntax Description
| show | Show running system information |
| fex | Show FEX information |
| chas_no | Type: uinteger min: 101 max: 199 FEX number |
| detail | Detailed information |
| ports | all FEX port information |
| event-history | FEX event history |
| __readonly__ | |
| TABLE_fex_info | FEX information |
| chas_id | Type: uinteger Configured FEX number |
| descr | Type: string Description |
| fex_state | Type: string FEX State |
| fex_ver | Type: string FEX version |
| sw_ver | Type: string Switch version |
| fex_interim_ver | Type: string FEX interim version |
| sw_interim_ver | Type: string Switch interim version |
| model | Type: string FEX model |
| serial | Type: string FEX serial |
| part_no | Type: string Part number |
| card_id | Type: uinteger Card id |
| mac | Type: string Mac address |
| num_macs | Type: uinteger Number of macs |
| bay | Type: uinteger Bay Number |
| rack | Type: string Rack Name |
| enclosure | Type: string Enclosure Name |
| enclosure_ser | Type: string Enclosure serial |
| rack_id | Type: string Rack id |
| fex_sw_gen | Type: uinteger Fex software gen |
| sw_sw_gen | Type: uinteger Switch software gen |
| pin_mode | Type: string Pinning mode |
| max_link | Type: uinteger Maximum links |
| post_level | Type: string Post level |
| fbr_port_control | Type: string Fabric port for control traffic |
| TABLE_fbr_state | Fabric port state |
| fbr_index | Type: string Fabric port interface |
| fbr_oper_state | Type: string Fabric port operational state |
| fsm_state | Type: string Fabric FSM state |
| TABLE_fex_port | FEX port |
| fex_port | Type: string FEX port |
| fex_port_oper_state | Type: string Operational state |
| fbr_port | Type: string Fabric port |
| primary_fabric | Type: string Primary fabric port |
| TABLE_logs | FEX logs |
| log | Type: string FEX log |
Command Modes
- /exec
show fex (satmgr)
show fex [ __readonly__ TABLE_fex fex_number chas_vendor fex_model chas_ser mod_model fex_ser module_no mod_partno fex_descr fex_state ]
Syntax Description
| show | Show running system information |
| fex | Show FEX information |
| __readonly__ | |
| TABLE_fex | Fex table |
| fex_number | Type: string Configured FEX number |
| chas_vendor | Type: string Chassis Vendor |
| fex_model | Type: string Fex Model |
| chas_ser | Type: string Chassis Serial number |
| mod_model | Type: string IO Module model |
| fex_ser | Type: string IO Module serial |
| module_no | Type: uinteger Module number |
| mod_partno | Type: string Module Part Number |
| fex_descr | Type: string FEX description |
| fex_state | Module State
|
Command Modes
- /exec
show fex detail
show fex detail [ __readonly__ TABLE_fex_info chas_id descr fex_state fex_ver sw_ver fex_interim_ver sw_interim_ver model serial part_no card_id mac num_macs bay rack enclosure enclosure_ser rack_id fex_sw_gen sw_sw_gen pin_mode max_link post_level fbr_port_control TABLE_fbr_state fbr_index fbr_oper_state fsm_state TABLE_fex_port fex_port fex_port_oper_state fbr_port primary_fabric TABLE_logs log ]
Syntax Description
| show | Show running system information |
| fex | Show FEX information |
| detail | Detailed information |
| __readonly__ | |
| TABLE_fex_info | FEX information |
| chas_id | Type: uinteger Configured FEX number |
| descr | Type: string Description |
| fex_state | Type: string FEX State |
| fex_ver | Type: string FEX version |
| sw_ver | Type: string Switch version |
| fex_interim_ver | Type: string FEX interim version |
| sw_interim_ver | Type: string Switch interim version |
| model | Type: string FEX model |
| serial | Type: string FEX serial |
| part_no | Type: string Part number |
| card_id | Type: uinteger Card id |
| mac | Type: string Mac address |
| num_macs | Type: uinteger Number of macs |
| bay | Type: uinteger Bay Number |
| rack | Type: string Rack Name |
| enclosure | Type: string Enclosure Name |
| enclosure_ser | Type: string Enclosure serial |
| rack_id | Type: string Rack id |
| fex_sw_gen | Type: uinteger Fex software gen |
| sw_sw_gen | Type: uinteger Switch software gen |
| pin_mode | Type: string Pinning mode |
| max_link | Type: uinteger Maximum links |
| post_level | Type: string Post level |
| fbr_port_control | Type: string Fabric port for control traffic |
| TABLE_fbr_state | Fabric port state |
| fbr_index | Type: string Fabric port interface |
| fbr_oper_state | Type: string Fabric port operational state |
| fsm_state | Type: string Fabric FSM state |
| TABLE_fex_port | FEX port |
| fex_port | Type: string FEX port |
| fex_port_oper_state | Type: string Operational state |
| fbr_port | Type: string Fabric port |
| primary_fabric | Type: string Primary fabric port |
| TABLE_logs | FEX logs |
| log | Type: string FEX log |
Command Modes
- /exec
show fex transceiver
show fex chas_no transceiver [ calibration | detail ]
Syntax Description
| show | Show running system information |
| fex | Show FEX information |
| chas_no | Type: uinteger min: 101 max: 199 FEX number |
| transceiver | Show FEX |
| calibration | Show FEX transceiver calibration information |
| detail | show FEX transceiver detail information |
Command Modes
- /exec
show fex version
show fex i version
Syntax Description
| show | Show running system information |
| version | Show the software version |
| fex | Show fex software version |
| i | Type: uinteger min: 101 max: 199 FEX number |
Command Modes
- /exec
show file
show file uri0 [ cksum | md5sum ] [ __readonly__ [file_content] + [file_content_cksum] [file_content_md5sum] ]
Syntax Description
| show | Show running system information |
| file | Displays content of files |
| uri0 | Type: uri Filename to be displayed |
| cksum | Displays CRC checksum for a file |
| md5sum | Displays MD5 checksum for a file |
| __readonly__ | Read only |
| file_content | Type: string uri file content buffer string |
| file_content_cksum | Type: string uri file content checksum |
| file_content_md5sum | Type: string uri file content md5sum |
Command Modes
- /exec
show fips status
show fips status [ __readonly__ operation_status o_status ]
Syntax Description
| show | Show running system information |
| fips | Show if FIPS mode is enabled or disabled Not available in this release. |
| status | Whether FIPS mode is enabled or disabled |
| __readonly__ | |
| operation_status | run-time information about fips |
| o_status | operational status of fips
|
Command Modes
- /exec
show forwarding
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table table_id ] [ ip | ipv4 ] { route | rnhdb } [recursive] [ summary | detail | platform | prefix [longer-prefixes] [ detail | platform ] | address [ detail | platform ] | interface interface [ detail | platform ] | next-hop nh [ detail | platform ] | attached | unresolved | adjacency { aif anh | drop | glean | punt } ] [ max-display-count display_count ] [ module module | vrf { vrf-name | vrf-known-name | all } ] + [ __readonly__ TABLE_vrf vrf_name_out table_name prefix_count TABLE_prefix ip_prefix TABLE_path [ ip_nexthop | special ] ifname route_count path_count mask_length routes_per_mask packet_cnt byte_cnt dmac src_rloc dst_rloc lisp_header ]
Syntax Description
| show | |
| forwarding | display fib information |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| table | display info per vpn-id |
| table_id | Type: hex table id in hex |
| ip | ipv4 |
| ipv4 | ipv4 |
| route | display IP routing table |
| rnhdb | rnh-db |
| recursive | display routes with recursive next hops |
| summary | display route counts |
| prefix | Type: ipprefix display single exact match route |
| longer-prefixes | display longer prefixes |
| address | Type: ipaddr display single longest match route |
| interface | display routes with this output i/f only |
| interface | Type: interface output interface |
| next-hop | display routes with this next-hop only |
| nh | Type: ipaddr next hop address |
| attached | display directly connected routes |
| unresolved | display unresolved routes |
| adjacency | display routes via specified adjacency |
| aif | Type: interface adjacency output interface |
| anh | Type: ipaddr adjacency next-hop address |
| drop | display routes via drop adjacency |
| glean | display routes via glean adjacency |
| punt | display routes via punt adjacency |
| detail | show detailed information about the routes |
| platform | one command to show pi and pd info together |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| max-display-count | displays max # of routes |
| display_count | Type: integer count |
| __readonly__ | |
| TABLE_vrf | vrf table |
| vrf_name_out | Type: string VRF name |
| table_name | Type: string table name |
| prefix_count | Type: integer total number of prefix in VRF |
| TABLE_prefix | all xml prefix entries |
| ip_prefix | Type: ipprefix ipv4 prefix |
| TABLE_path | path table |
| ip_nexthop | Type: ipaddr next hop address |
| special | special adjacencies
|
| ifname | Type: interface output interface |
| route_count | Type: integer total number of routes in VRF |
| path_count | Type: integer total number of paths in VRF |
| mask_length | Type: integer length of mask |
| routes_per_mask | Type: integer |
| packet_cnt | Type: integer Packet count |
| byte_cnt | Type: integer Byte count |
| dmac | Type: ethernet Destination MAC address |
| src_rloc | Type: ipaddr LISP Source RLOC |
| dst_rloc | Type: ipaddr LISP Dest RLOC |
| lisp_header | Type: string LISP header string |
Command Modes
- /exec
show forwarding adjacency
show forwarding [ vrf { vrf-name | vrf-known-name | all } ] [ ip | ipv4 ] adjacency [mpls] [lisp] [aif] [anh] [ detail | stats | platform ] [ module module ] [ __readonly__ adj-count nexthop rewinfo interface bgp_rnh bgp_orig_as bgp_peer_as pkts bytes exp src_addr dest_addr lisp_flags lisp_inst_id pltfm_key refcount ]
Syntax Description
| show | |
| forwarding | display fib information |
| ip | ipv4 |
| ipv4 | ipv4 |
| adjacency | display adjacency information |
| platform | one command to show pi and pd info together |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| mpls | mpls adjacency information |
| lisp | LISP adjacency information |
| aif | Type: interface adjacency output interface |
| anh | Type: ipaddr adjacency next hop |
| detail | detail |
| stats | adjacency statistics |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| adj-count | Type: integer total adj count |
| nexthop | Type: ipaddr next hop address |
| rewinfo | Type: string rewrite information |
| interface | Type: interface output interface |
| bgp_rnh | Type: string next hop address |
| bgp_orig_as | Type: integer bgp orig as |
| bgp_peer_as | Type: integer bgp peer as |
| exp | Type: integer exp mapping |
| pkts | Type: longlong packet stats |
| bytes | Type: longlong bytes stats |
| src_addr | Type: ipaddr src address |
| dest_addr | Type: ipaddr dest address |
| lisp_flags | Type: integer lisp flags |
| lisp_inst_id | Type: integer lisp instance id |
| pltfm_key | Type: integer platform key |
| refcount | Type: integer reference count |
Command Modes
- /exec
show forwarding bypass-hardware
show forwarding bypass-hardware [ module module ]
Syntax Description
| show | |
| forwarding | fib information |
| bypass-hardware | bypass hardware |
| module | slot |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding capture
show forwarding capture [ module module ] [ __readonly__ type len data ]
Syntax Description
| show | |
| forwarding | display fib information |
| capture | display capture buffer |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| type | Type: integer type |
| len | Type: integer length |
| data | Type: string raw data |
Command Modes
- /exec
show forwarding distribution
show forwarding distribution { pauz | rezum }
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution information |
| pauz | start black-holing routes |
| rezum | stop black-holing routes |
Command Modes
- /exec
show forwarding distribution capture
show forwarding distribution capture [ __readonly__ type len data ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution info |
| capture | unicast capture buffer |
| __readonly__ | |
| type | Type: integer type |
| len | Type: integer length |
| data | Type: string raw data |
Command Modes
- /exec
show forwarding distribution clients
show forwarding distribution clients [ __readonly__ id pid name shms shme shmn ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution info |
| clients | unicast client information |
| __readonly__ | |
| id | Type: integer client identifier |
| pid | Type: integer client pid |
| name | Type: string client name |
| shms | Type: hex shmem start |
| shme | Type: hex shmem end |
| shmn | Type: string shmem name |
Command Modes
- /exec
show forwarding distribution fib-state
show forwarding distribution fib-state [ __readonly__ slot state ttc tprc tv4ac tv6ac TABLE_fib_state tid tafi prc pc tname ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution info |
| fib-state | unicast fib state info |
| __readonly__ | |
| slot | Type: integer slot number |
| state | Type: string fib state |
| ttc | Type: integer total table count |
| tprc | Type: integer total prefix count |
| tv4ac | Type: integer total v4 adj count |
| tv6ac | Type: integer total v6 adj count |
| TABLE_fib_state | fib-state table |
| tid | Type: hex table identifier |
| tafi | Type: string table afi |
| prc | Type: integer table prefix count |
| pc | Type: integer table path count |
| tname | Type: string table name |
Command Modes
- /exec
show forwarding distribution ip igmp snooping
show forwarding distribution ip igmp snooping [ vlan vlan-id [ group [ grpaddr | mac-grpaddr ] [ source srcaddr ] ] ] [detail] [ __readonly__ refcount oiflist_id last_oiflist_id ftag-id ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| ip | IPV4 information |
| igmp | MFDM IGMP information |
| snooping | L2 mcast snooping related information |
| vlan | Info specific to a vlan |
| vlan-id | Type: vlan Vlan id value |
| group | Group specific information |
| grpaddr | Type: ipaddr Group address |
| mac-grpaddr | Type: ethernet Group MAC address |
| source | (G,S) specific information |
| srcaddr | Type: ipaddr Source address |
| detail | Detailed display |
| __readonly__ | |
| refcount | Type: integer Reference Count |
| oiflist_id | Type: integer OIF list Identifier |
| last_oiflist_id | Type: integer Last OIF list Identifier |
| ftag-id | Type: integer ftag Id |
Command Modes
- /exec
show forwarding distribution ipv6 multicast route
show forwarding distribution ipv6 multicast route [ table table_id | vrf vrf-name ] [ group [source] | summary ] [ __readonly__ table_type num_routes num_starg_routes num_sg_routes num_gprefix_routes num_groups num_sources src_len grp_len df_ordinal rpfif address flag route_pkts route_bytes mti_src_if mti_grp_ip mti_src_ip ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | display fib distribution information |
| ipv6 | IPV6 related information |
| multicast | display IPv6 multicast information |
| route | display routing table |
| vrf | display routes for a specific VRF |
| vrf-name | Type: string VRF name |
| table | table |
| table_id | Type: hex table number |
| group | Type: ipv6prefix Multicast IPv6 Group Address |
| source | Type: ipv6prefix Multicast IPv6 Source Address |
| summary | display route counts |
| __readonly__ | |
| table_type | Type: string Table Type |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
| num_groups | Type: integer Number of group entries in the table |
| num_sources | Type: integer Number of (S, G) entries for the group address |
| address | Type: string Ipv6 address string |
| src_len | Type: integer Source Address Mask |
| grp_len | Type: integer Group address Mask |
| df_ordinal | Type: string DF ordinal |
| rpfif | Type: string RPF interface |
| flag | Type: string Route type flag |
| route_pkts | Type: longlong Route packet count |
| route_bytes | Type: longlong Route bytes |
| mti_src_if | Type: hex MTI Source Ifindex |
| mti_grp_ip | Type: ipaddr MTI Group IP Address |
| mti_src_ip | Type: ipaddr MTI Source IP Address |
Command Modes
- /exec
show forwarding distribution l2 multicast
show forwarding distribution l2 multicast [ ip-based | mac-based ] [ vlan vlan-id [ group grpaddr [ source srcaddr ] | destination-mac dmac ] ] [summary] [ __readonly__ refcount oiflist_id last_oiflist_id ftag-id src_str grp_str vlan num_routes num_starg_routes num_sg_routes num_gprefix_routes ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| l2 | L2 information |
| multicast | L2 multicast information |
| ip-based | IPv4 based |
| mac-based | MAC based |
| vlan | Info specific to a vlan |
| vlan-id | Type: vlan Vlan id value |
| group | Group specific information |
| grpaddr | Type: ipaddr Group address |
| source | (G,S) specific information |
| srcaddr | Type: ipaddr Source address |
| destination-mac | Destination MAC specific information |
| dmac | Type: ethernet Destination MAC address |
| summary | display route counts |
| __readonly__ | |
| refcount | Type: integer Reference Count |
| oiflist_id | Type: integer OIF list Identifier |
| last_oiflist_id | Type: integer Last OIF list Identifier |
| ftag-id | Type: integer ftag Id |
| src_str | Type: string Source |
| grp_str | Type: string Group |
| vlan | Type: integer vlan_id |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
Command Modes
- /exec
show forwarding distribution lisp counters
show forwarding distribution lisp counters [ __readonly__ count ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution information |
| lisp | for lisp application |
| counters | counters |
| __readonly__ | |
| count | Type: integer count |
Command Modes
- /exec
show forwarding distribution lisp vrf enabled
show forwarding distribution lisp vrf enabled [ __readonly__ TABLE_lisp_vrf_enabled vrf lisp_enabled req_id operation ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution information |
| lisp | for lisp application |
| vrf | vrf |
| enabled | enabled |
| __readonly__ | |
| TABLE_lisp_vrf_enabled | |
| vrf | Type: integer vrf key |
| lisp_enabled | Type: string lisp enabled status |
| req_id | Type: integer req id |
| operation | Type: string operation |
Command Modes
- /exec
show forwarding distribution logging
show forwarding distribution logging [ enable | disable ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution information |
| logging | enable/disable file logging |
| enable | start file logging |
| disable | stop file logging |
Command Modes
- /exec
show forwarding distribution multicast (mfdm)
show forwarding distribution multicast [messages] [ __readonly__ fibstate slot accepting_routes num_accepting_routes ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast FIB distribution information |
| messages | Outstanding Message Information |
| __readonly__ | |
| fibstate | Type: string IP Multicast FIB process state |
| slot | Type: integer Slot |
| accepting_routes | Type: string Indicates whether FIB is accepting routes |
| num_accepting_routes | Type: integer Number of fibs accepting routes |
Command Modes
- /exec
show forwarding distribution multicast (mfdm)
show forwarding distribution multicast { mfib-txlist [ vrf vrf-name ] | mfib-buffers }
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast information |
| mfib-txlist | Show MFIB transmission-list information |
| vrf | Specify VRF |
| vrf-name | Type: string Specify VRF name |
| mfib-buffers | Show MFIB route buffer information |
Command Modes
- /exec
show forwarding distribution multicast client-ack-db
show forwarding distribution multicast client-ack-db [ __readonly__ xid num_recepients num_responses ]
Syntax Description
| show | show |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast |
| client-ack-db | Displays the client ack db |
| __readonly__ | |
| xid | Type: integer XID |
| num_recepients | Type: integer Number of recepients |
| num_responses | Type: integer Number of responses |
Command Modes
- /exec
show forwarding distribution multicast client
show forwarding distribution multicast client [ __readonly__ num-clients client-name client-id shmem-name ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast information |
| client | Show multicast distribution client information |
| __readonly__ | |
| num-clients | Type: integer Number of Clients registered |
| client-name | Type: string Client Name |
| client-id | Type: integer Client-id |
| shmem-name | Type: string Shared Memory Segment Name |
Command Modes
- /exec
show forwarding distribution multicast outgoing-interface-list
show forwarding distribution multicast outgoing-interface-list { L2 | L3 | OTV } [index] [ __readonly__ platform_index ref_count num_oif oif ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast FIB distribution information |
| outgoing-interface-list | Outgoing interface list |
| L2 | Layer 2 oiflist |
| L3 | Layer 3 oiflist |
| OTV | OTV oiflist |
| index | Type: integer min: 1 max: 65535 Outgoing Interface List index |
| __readonly__ | |
| platform_index | Type: hex Platform index |
| ref_count | Type: integer Reference count |
| num_oif | Type: integer Number of outgoing interfaces |
| oif | Type: string OIF name |
| next_hop | Type: string Next hops |
| vlan_id | Type: integer Vlan ID |
Command Modes
- /exec
show forwarding distribution multicast resp-ack-timer-msgs
show forwarding distribution multicast resp-ack-timer-msgs
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| multicast | Multicast information |
| resp-ack-timer-msgs | show response ack timers for MFDM |
Command Modes
- /exec
show forwarding distribution multicast route
show forwarding distribution [ip] multicast route [ table id | vrf { vrf_name | all } ] [ [ group { gaddr [mask] | gprefix } ] [ source { saddr [smask] | sprefix } ] | summary ] [ __readonly__ table_name num_routes num_starg_routes num_sg_routes num_gprefix_routes src_len grp_len df_ordinal rpfif rpf_ifname flag flag_value num_groups num_sources refcount oiflist_id oif_count oif_name oif_ifindex bytecnt pktcnt mti_src_if mti_grp_ip mti_src_ip ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| ip | IPV4 information |
| multicast | Multicast information |
| vrf | Specify VRF |
| vrf_name | Type: string Specify VRF name |
| all | Display information for all VRFs |
| table | Specify Multicast Routing Table |
| id | Type: integer Multicast Routing Table Identifier |
| group | IPv4 Multicast Group specific |
| gaddr | Type: ipaddr IPv4 Multicast Group Address |
| mask | Type: ipaddr mask for group ip address |
| gprefix | Type: ipprefix IPv4 Multicast Group Prefix |
| source | IPv4 Multicast Source specific |
| saddr | Type: ipaddr IPv4 Source Address |
| smask | Type: ipaddr mask for group ip address |
| sprefix | Type: ipprefix IPv4 Multicast Source Prefix |
| summary | display route counts |
| __readonly__ | |
| table_name | Type: string Table name |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
| src_len | Type: integer Source Address Mask |
| grp_len | Type: integer Group address Mask |
| df_ordinal | Type: integer DF ordinal |
| rpfif | Type: string RPF interface |
| rpf_ifname | Type: string RPF Interface ifName |
| flag | Type: string Route type flag |
| flag_value | Type: hex hex value of route flag |
| num_groups | Type: integer Number of group entries in the table |
| num_sources | Type: integer Number of (S, G) entries for the group address |
| refcount | Type: integer Reference Count |
| oiflist_id | Type: integer OIF list Identifier |
| oif_count | Type: integer Number of OIFs |
| oif_name | Type: string OIF Name |
| oif_ifindex | Type: hex OIF ifIndex |
| bytecnt | Type: longlong Current Byte counter |
| pktcnt | Type: longlong Current Packet counter |
| mti_src_if | Type: hex MTI Source Ifindex |
| mti_grp_ip | Type: ipaddr MTI Group IP Address |
| mti_src_ip | Type: ipaddr MTI Source IP Address |
Command Modes
- /exec
show forwarding distribution otv multicast route
show forwarding distribution otv multicast route [ vlan vlan-id ] [ __readonly__ refcount oiflist_id src_ip grp_ip address grp_length external_intf ds dg if_index ]
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | FIB distribution information |
| otv | OTV information |
| multicast | Multicast information |
| route | Multicast route information |
| vlan | Info specific to a vlan |
| vlan-id | Type: vlan Vlan id value |
| __readonly__ | |
| refcount | Type: integer Reference Count |
| oiflist_id | Type: integer OIF list Identifier |
| src_ip | Type: ipaddr Source IP |
| grp_ip | Type: ipaddr Group IP |
| address | Type: string IPv6 address string |
| grp_length | Type: integer Group length |
| external_intf | Type: string External interface |
| ds | Type: ipaddr Delivery source IP |
| dg | Type: ipaddr Delivery group IP |
| if_index | Type: string Interface Index |
Command Modes
- /exec
show forwarding distribution peer-id
show forwarding distribution peer-id [ vpls | otv ] [ __readonly__ str ]
Syntax Description
| show | Show running system information |
| forwarding | forwarding information |
| distribution | fib distribution info |
| peer-id | HW Peer-id allocation info |
| vpls | VPLS |
| otv | OTV |
| __readonly__ | |
| str | Type: string |
Command Modes
- /exec
show forwarding distribution trace
show forwarding distribution trace
Syntax Description
| show | |
| forwarding | Display Forwarding Information |
| distribution | fib distribution info |
| trace | unicast trace information |
Command Modes
- /exec
show forwarding ecmp
show forwarding ecmp [ [ vrf { vrf-name | vrf-known-name } ] lisp ] [platform] [ module module ] [ __readonly__ header ecmp_hash intf nh v6nh hw_index num_mpls holder refcount num_paths sw_ptr ]
Syntax Description
| show | |
| forwarding | Display fib information |
| ecmp | Show information about ECMPs |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| lisp | Show information about LISP ECMPs |
| platform | one command to show pi and pd info together |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| header | Type: string o/p header |
| ecmp_hash | Type: hex ecmp hash |
| intf | Type: interface interface |
| nh | Type: ipaddr next hop |
| v6nh | Type: string V6 next hop |
| hw_index | Type: hex Hw index |
| num_mpls | Type: integer No of MPLS ecmp |
| holder | Type: hex holder bitmap |
| refcount | Type: integer refcount |
| sw_ptr | Type: hex Software pointer |
| num_paths | Type: integer No of paths |
Command Modes
- /exec
show forwarding ecmp recursive
show forwarding ecmp recursive [platform] [ max-display-count display_count ] [ module module ] [ __readonly__ header num_pfxs rnh_table_id nh rnh_len v6nh hw_instance nh_vpn_label cnh_intf ]
Syntax Description
| show | |
| forwarding | Display fib information |
| ecmp | Show information about ECMPs |
| recursive | Show information about recursive ECMPs |
| platform | one command to show pi and pd info together |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| max-display-count | displays max # of routes |
| display_count | Type: integer count |
| __readonly__ | |
| header | Type: string o/p header |
| num_pfxs | Type: integer Number of prefixes using this virtual object |
| rnh_table_id | Type: hex The table id where the RNHs are present |
| nh | Type: ipaddr Next hop info |
| rnh_len | Type: integer Next hop mask length |
| v6nh | Type: string V6 Next hop info |
| hw_instance | Type: integer Hardware instance info |
| nh_vpn_label | Type: integer NH VPN label |
| cnh_intf | Type: interface cnh output interface |
Command Modes
- /exec
show forwarding file-log disable
show forwarding file-log disable
Syntax Description
| show | show |
| forwarding | forwarding |
| file-log | logging to tmp file |
| disable | disable |
Command Modes
- /exec
show forwarding file-log enable
show forwarding file-log enable
Syntax Description
| show | show |
| forwarding | forwarding |
| file-log | logging to tmp file |
| enable | enable |
Command Modes
- /exec
show forwarding interfaces
show forwarding interfaces [ module module ] [ __readonly__ intf v4adjcnt v6adjcnt rpfmode mac ]
Syntax Description
| show | |
| forwarding | fib information |
| interfaces | show fib interface info |
| __readonly__ | |
| intf | Type: interface interface name |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| v4adjcnt | Type: integer count of v4 adjacencies |
| v6adjcnt | Type: integer count of v6 adjacencies |
| mac | Type: string mac address |
| rpfmode | uRPF mode
|
Command Modes
- /exec
show forwarding ipv6
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table table_id ] ipv6 { route | rnhdb } [recursive] [ detail | summary | platform | prefix [longer-prefixes] [ detail | platform ] | address [ detail | platform ] | interface interface | next-hop nh | attached | unresolved | adjacency { aif anh | drop | glean | punt } ] [ max-display-count display_count ] [ module module | vrf { vrf-name | vrf-known-name | all } ] + [ __readonly__ header vrfname tblname prefix-count pfx { nexthop | special } intf route-count path-count mask-length routes-per-mask ]
Syntax Description
| show | |
| forwarding | display fib information |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| table | display info per vpn-id |
| table_id | Type: hex table id in hex |
| ipv6 | ipv6 |
| route | display IP routing table |
| platform | one command to show pi and pd info together |
| rnhdb | rnhdb |
| recursive | display routes with recursive next hops |
| detail | show detailed information about the routes |
| summary | display route counts |
| prefix | Type: ipv6prefix display single exact match route |
| longer-prefixes | display longer prefixes |
| address | Type: ipv6addr display single longest match route |
| interface | display routes with this output i/f only |
| interface | Type: interface output interface |
| next-hop | display routes with this next-hop only |
| nh | Type: ipv6addr next hop address |
| attached | display directly connected routes |
| unresolved | display unresolved routes |
| adjacency | display routes via specified adjacency |
| aif | Type: interface adjacency output interface |
| anh | Type: ipv6addr adjacency next-hop address |
| drop | display routes via drop adjacency |
| glean | display routes via glean adjacency |
| punt | display routes via punt adjacency |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| max-display-count | displays max # of routes |
| display_count | Type: integer count |
| __readonly__ | |
| header | Type: string header string |
| vrfname | Type: string VRF name |
| tblname | Type: string table name |
| prefix-count | Type: integer total number of prefix in VRF |
| pfx | Type: ipv6prefix ipv6 prefix |
| nexthop | Type: ipv6addr next hop address |
| special | special adjacencies
|
| intf | Type: interface output interface |
| route-count | Type: integer total number of routes in VRF |
| path-count | Type: integer total number of paths in VRF |
| mask-length | Type: integer length of mask |
| routes-per-mask | Type: integer |
Command Modes
- /exec
show forwarding ipv6 adjacency
show forwarding [ vrf { vrf-name | vrf-known-name | all } ] ipv6 adjacency [mpls] [aif] [anh] [ detail | stats | platform ] [ module module ] [ __readonly__ adj-count nexthop rewinfo interface bgp_rnh bgp_orig_as bgp_peer_as ]
Syntax Description
| show | |
| forwarding | display fib information |
| ipv6 | ipv6 |
| adjacency | display adjacency information |
| platform | one command to show pi and pd info together |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| mpls | mpls adjacency information |
| aif | Type: interface adjacency output interface |
| anh | Type: ipv6addr adjacency next hop |
| detail | detail |
| stats | adjacency statistics |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| adj-count | Type: integer total adj count |
| nexthop | Type: ipv6addr next hop address |
| rewinfo | Type: string rewrite information |
| interface | Type: interface output interface |
| bgp_rnh | Type: string next hop address |
| bgp_orig_as | Type: integer bgp orig as |
| bgp_peer_as | Type: integer bgp peer as |
Command Modes
- /exec
show forwarding ipv6 multicast route
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table tab_id ] ipv6 multicast route { [ group { group | group_addr } | source { source | source_addr } | module module | vrf { vrf-name | all } ] | + | summary [ module module | vrf { vrf-name | vrf-known-name | all } ] + } [ __readonly__ table_type num_routes num_starg_routes num_sg_routes num_gprefix_routes num_prefix_insert_fail num_groups num_sources src_len grp_len df_ordinal rpfif address flag route_pkts route_bytes ]
Syntax Description
| show | |
| forwarding | display fib information |
| ipv6 | ipv6 |
| multicast | IPV6 related Multicast information |
| route | Multicast route information |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| table | display info per vpn-id |
| tab_id | Type: hex table number |
| group | Multicast IPv6 Group Address |
| group | Type: ipv6prefix Multicast IPv6 Group Address with prefix |
| group_addr | Type: ipv6addr Multicast IPv6 Group Address |
| source | Multicast IPv6 Source Address |
| source | Type: ipv6prefix Multicast IPv6 Source Address with prefix |
| source_addr | Type: ipv6addr Multicast IPv6 Source Address |
| summary | display route counts |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| table_type | Type: string Table Type |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
| num_prefix_insert_fail | Type: integer Prefix insert fail count |
| num_groups | Type: integer Number of group entries in the table |
| num_sources | Type: integer Number of (S, G) entries for the group address |
| address | Type: string Ipv6 address string |
| src_len | Type: integer Source Address Mask |
| grp_len | Type: integer Group address Mask |
| df_ordinal | Type: string DF ordinal |
| rpfif | Type: string RPF interface |
| flag | Type: string Route type flag |
| route_pkts | Type: longlong Route packet count |
| route_bytes | Type: longlong Route bytes |
Command Modes
- /exec
show forwarding ipv6 pss route
show forwarding [ vrf { vrf-name | vrf-known-name } | table table_id ] ipv6 pss route [ module module ]
Syntax Description
| show | show |
| forwarding | forwarding |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| table | display info per vpn-id |
| table_id | Type: integer table number |
| ipv6 | ipv6 |
| pss | display info from pss |
| route | route |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding l2 multicast
show forwarding l2 multicast [ vlan vlan-id [ group grpaddr source srcaddr | destination-mac dstmac ] ] [ vdc vdc-id ] [ module num ] [ __readonly__ epoch resource_id dest_index hw_handle dmac text value ]
Syntax Description
| show | Show running system information |
| forwarding | Forwarding information |
| l2 | L2 related information |
| multicast | Multicast related information |
| vlan | Information Specific to a Vlan |
| vlan-id | Type: vlan Vlan id value |
| group | (S,G) specific information |
| grpaddr | Type: ipaddr Group address |
| source | source specific information |
| srcaddr | Type: ipaddr Source address |
| destination-mac | Destination MAC address |
| dstmac | Type: ethernet Ethernet MAC address |
| vdc | VDC |
| vdc-id | Type: integer min: 1 max: 16 VDC id |
| module | Slot |
| num | Type: integer Slot number |
| __readonly__ | |
| resource_id | Type: integer Resource Identifier |
| dest_index | Type: hex Destination Index Identifier |
| epoch | Type: integer Epoch number |
| hw_handle | Type: hex Hardware Handle |
| dmac | Type: ethernet Destination MAC address |
| text | Type: string String |
| value | Type: integer Value |
Command Modes
- /exec
show forwarding l2vpn ipv6 multicast route
show forwarding l2vpn ipv6 multicast route [ [ vlan vlan-id ] | [ softwarebd software-bd ] ] [ module module ]
Syntax Description
| show | show |
| forwarding | forwarding |
| l2vpn | Layer 2 VPN Not available in this release. |
| ipv6 | ipv6 |
| multicast | Multicast IPv6 information |
| route | Mcast route information |
| vlan | vlan |
| softwarebd | Software Bridge Domain |
| vlan-id | Type: integer min: 1 max: 4095 vlan id |
| software-bd | Type: integer min: 1 max: 16383 Software bd |
| module | slot |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding l2vpn label vpls
show forwarding l2vpn label [label_id] vpls [ module module ] [ __readonly__ label_id ]
Syntax Description
| show | show |
| forwarding | forwarding |
| l2vpn | l2vpn forwarding Not available in this release. |
| label | VC label |
| label_id | Type: integer min: 0 max: 1048475 VC label |
| vpls | VPLS |
| module | slot |
| __readonly__ | |
| label_id | Type: integer Label ID |
Command Modes
- /exec
show forwarding l2vpn label xconnect
show forwarding l2vpn label [label_id] xconnect [ module module ] [ __readonly__ label_id ]
Syntax Description
| show | show |
| forwarding | forwarding |
| l2vpn | l2vpn forwarding Not available in this release. |
| label | VC label |
| label_id | Type: integer min: 0 max: 1048475 VC label |
| xconnect | xconnect or VPWS |
| module | slot |
| __readonly__ | |
| label_id | Type: integer Label ID |
Command Modes
- /exec
show forwarding l2vpn multicast outgoing-interface-list
show forwarding l2vpn multicast outgoing-interface-list [ index oiflist-index ]
Syntax Description
| show | |
| forwarding | Forwarding information |
| l2vpn | Layer 2 VPN Not available in this release. |
| multicast | Multicast IPv4 information |
| outgoing-interface-list | show outgoing interface list info |
| index | oiflist index |
| oiflist-index | Type: integer min: 1 max: 65534 oiflist-index |
Command Modes
- /exec
show forwarding l2vpn multicast route
show forwarding l2vpn multicast route [ [ vlan vlan-id ] | [ softwarebd software-bd ] ] [ module module ]
Syntax Description
| show | show |
| forwarding | forwarding |
| l2vpn | Layer 2 VPN Not available in this release. |
| multicast | Multicast IPv4 information |
| route | Mcast route information |
| vlan | vlan |
| softwarebd | Software Bridge Domain |
| vlan-id | Type: integer min: 1 max: 4095 vlan id |
| software-bd | Type: integer min: 1 max: 16383 Software bd |
| module | slot |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding l2vpn service vpls
show forwarding l2vpn service vpls { service_id { service_id | all } | vlan { vlan_id | vlan_all } | peer { interface intf-name | next-hop addr | peer_all } } [ module module ] [detail]
Syntax Description
| show | show |
| forwarding | display fib information |
| l2vpn | l2vpn forwarding Not available in this release. |
| service | Services |
| vpls | Vpls |
| service_id | Specifies a service_id |
| service_id | Type: integer service ID |
| all | all VPLS services |
| vlan | VLAN info |
| vlan_id | Type: integer VLAN number |
| vlan_all | all VPLS services |
| peer | define the peer |
| peer_all | all peers |
| interface | PW interface for peer |
| intf-name | Type: interface interface name |
| next-hop | Next hop to reach the peer |
| addr | Type: ipaddr IP address |
| module | slot |
| module | Type: integer slot number |
| detail | Display detailed information |
Command Modes
- /exec
show forwarding l2vpn service xconnect
show forwarding l2vpn service xconnect service_id { service_id | all } [ module module ] [detail]
Syntax Description
| show | show |
| forwarding | display fib information |
| l2vpn | l2vpn forwarding Not available in this release. |
| service | Services |
| xconnect | xconnect or VPWS |
| service_id | Specify a service_id in hex |
| service_id | Type: hex service ID |
| all | All service-id will be displayed |
| module | slot |
| module | Type: integer slot number |
| detail | Display detailed information |
Command Modes
- /exec
show forwarding l2vpn vlan
show forwarding l2vpn vlan [vlan_id] [ module module ] [ __readonly__ vlan ]
Syntax Description
| show | show |
| forwarding | forwarding |
| l2vpn | l2vpn forwarding Not available in this release. |
| vlan | vlan |
| vlan_id | Type: integer min: 0 max: 4095 vlan id |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| vlan | Type: integer vlan |
Command Modes
- /exec
show forwarding mpls
show forwarding mpls [ vrf { vrf-name | vrf-known-name | all } [ label label | prefix | v6prefix ] | table table_id [ label label | prefix | v6prefix ] | label-space label-space-id | label label | prefix | v6prefix ] [ module module ] [implicit] [ __readonly__ out-table-id out-intf out-ip out-op ]
Syntax Description
| show | show |
| forwarding | forwarding |
| mpls | mpls forwarding Not available in this release. |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known vrf name |
| all | all vrfs |
| table | display info per vpn-id |
| table_id | Type: hex table number |
| label-space | label space |
| label-space-id | Type: integer label space id |
| label | mpls labels |
| label | Type: integer min: 0 max: 1048475 mpls label value |
| prefix | Type: ipprefix Labels for single exact match route |
| v6prefix | Type: ipv6prefix Labels for single exact match v6 route |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| out-table-id | Type: hex Output table-id |
| out-intf | Type: interface Output Interface |
| out-ip | Type: ipaddr Output Next Hop |
| out-op | Type: string Output Label op |
| implicit | Display implicit label |
Command Modes
- /exec
show forwarding mpls aggregate
show forwarding mpls aggregate [ label { label-id | all } ] [detail] [ module module ] [ __readonly__ [ TABLE_label_info label id [sw_index] ] ]
Syntax Description
| show | |
| forwarding | display fib information |
| mpls | mpls forwaring Not available in this release. |
| aggregate | aggregate label |
| label | label |
| label-id | Type: integer label-id |
| all | all |
| detail | detail |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| TABLE_label_info | |
| label | Type: integer |
| id | Type: hex |
| sw_index | Type: hex |
Command Modes
- /exec
show forwarding mpls cbts
show forwarding mpls cbts [ module module ] [ __readonly__ [ TABLE_cbts label [out-intf] [out-table-id] [out-ip] [out-op] ] ]
Syntax Description
| show | show |
| forwarding | forwarding |
| mpls | mpls forwaring Not available in this release. |
| cbts | cbts labels |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| TABLE_cbts | |
| label | Type: integer mpls label value |
| out-intf | Type: string Output Interface |
| out-table-id | Type: hex Output table-id |
| out-ip | Type: string Output Next Hop |
| out-op | Type: string Output Label op |
Command Modes
- /exec
show forwarding mpls ecmp
show forwarding mpls ecmp [ module module ] [ __readonly__ [ TABLE_ecmp type num_paths ip_paths mpls_paths ecmp_hash holder refcount hw_index [ TABLE_ecmp_paths label_info ] ] ]
Syntax Description
| show | show |
| forwarding | display fib information |
| mpls | mpls forwarding |
| ecmp | mpls ecmps |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| TABLE_ecmp | |
| type | Type: hex ecmp type |
| num_paths | Type: integer No of paths |
| ip_paths | Type: integer No of ip paths |
| mpls_paths | Type: integer No of mpls paths |
| ecmp_hash | Type: hex ecmp hash |
| holder | Type: hex holder bitmap |
| refcount | Type: integer refcount |
| hw_index | Type: hex Hw index |
| TABLE_ecmp_paths | |
| label_info | Type: string rew info |
Command Modes
- /exec
show forwarding mpls summary
show forwarding mpls summary [ module module ] [ __readonly__ [ TABLE_labels space count total_deagg_labels ] ]
Syntax Description
| show | show |
| forwarding | display fib information |
| mpls | mpls forwarding Not available in this release. |
| summary | summary |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| TABLE_labels | |
| space | Type: hex label space |
| count | Type: integer number of labels |
| total_deagg_labels | Type: integer total deagg labels |
Command Modes
- /exec
show forwarding mpls te
show forwarding mpls te [te_if] [detail] [ module module ] [ __readonly__ TABLE_te id [midpoint_source] [dest] [tunnel_id] [ext_tunnel_id] [lisp_id] [adjacency] [hh] [lfib_adj] [adj_refcount] [obj_refcount] [te_state] [next_hop] [next_if_index] [op_label] [backup_tunnel] [adj_key_id] [frr_label] [local_label] [adj_count] [type] [out_if] [out_lbl] [backup_if] [backup_lbl] ]
Syntax Description
| show | |
| forwarding | display fib information |
| mpls | mpls forwarding Not available in this release. |
| te | Traffic Engineering |
| detail | detail |
| module | slot |
| te_if | Type: interface tunnel-te number |
| module | Type: integer slot number |
| __readonly__ | |
| TABLE_te | |
| id | Type: string headend if index |
| midpoint_source | Type: string |
| dest | Type: string |
| tunnel_id | Type: hex |
| ext_tunnel_id | Type: hex |
| lisp_id | Type: hex |
| adjacency | Type: string |
| hh | Type: hex HH |
| lfib_adj | Type: string lfib adjavency is drop |
| adj_refcount | Type: integer |
| obj_refcount | Type: integer |
| te_state | Type: string |
| next_hop | Type: string |
| next_if_index | Type: string |
| op_label | Type: integer |
| backup_tunnel | Type: string |
| adj_key_id | Type: integer |
| frr_label | Type: integer |
| local_label | Type: string |
| adj_count | Type: integer te related adj count |
| type | Type: string |
| out_if | Type: string |
| out_lbl | Type: integer |
| backup_if | Type: string |
| backup_lbl | Type: integer |
Command Modes
- /exec
show forwarding multicast outgoing-interface-list
show forwarding multicast outgoing-interface-list { L2 | L3 } [platform] [ module module ] [index] [ __readonly__ refcount num_oif intf ]
Syntax Description
| show | |
| forwarding | Forwarding information |
| multicast | Multicast IPv4 information |
| outgoing-interface-list | show outgoing interface list info |
| L2 | Layer 2 oiflist |
| L3 | Layer 3 oiflist |
| platform | Display PI/PD |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| index | Type: integer min: 1 max: 65535 Outgoing Interface List Index |
| __readonly__ | |
| refcount | Type: integer Reference count |
| num_oif | Type: integer Number of outgoing interfaces |
| intf | Type: string OIF name |
Command Modes
- /exec
show forwarding multicast route
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table table_id ] [ ip | ipv4 ] multicast route [platform] { [ group { gaddr [mask] | gprefix } | source { saddr [smask] | sprefix } | module module | vrf { vrf-name | vrf-known-name | all } ] | + | summary [ module module | vrf { vrf-name | vrf-known-name | all } ] + } [ __readonly__ table_type num_routes num_starg_routes num_sg_routes num_gprefix_routes num_prefix_insert_fail num_groups num_sources src_len grp_len df_ordinal rpfif rpf_ifindex flag flag_value route_pkts route_bytes oiflist_id platform_id oif_count refcount oifname oifindex oif_pkts oif_bytes ]
Syntax Description
| show | |
| forwarding | Forwarding information |
| ip | ipv4 |
| ipv4 | ipv4 |
| multicast | Multicast IPv4 information |
| route | Mcast route information |
| platform | Platform Details |
| table | display info per vpn-id |
| table_id | Type: integer table number |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| group | Multicast IPv4 Group specific info |
| gaddr | Type: ipaddr Multicast IPv4 Group Address |
| mask | Type: ipaddr Multicast IPv4 Group Address mask |
| gprefix | Type: ipprefix Multicast IPv4 Group Prefix |
| source | Multicast IPv4 Source specific info |
| saddr | Type: ipaddr Multicast IPv4 Source Address |
| smask | Type: ipaddr Multicast IPv4 Source Address mask |
| sprefix | Type: ipprefix Multicast IPv4 Source Prefix |
| summary | display route counts |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| table_type | Type: string Table Type |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
| num_prefix_insert_fail | Type: integer Prefix insert fail count |
| num_groups | Type: integer Number of group entries in the table |
| num_sources | Type: integer Number of (S, G) entries for the group address |
| src_len | Type: integer Source Address Mask |
| grp_len | Type: integer Group address Mask |
| df_ordinal | Type: string DF ordinal |
| rpfif | Type: string RPF interface |
| rpf_ifindex | Type: hex RPF Interface ifIndex |
| flag | Type: string Route type flag |
| flag_value | Type: hex hex value of route flag |
| route_pkts | Type: longlong Route packet count |
| route_bytes | Type: longlong Route bytes |
| oiflist_id | Type: integer OIF list Identifier |
| platform_id | Type: integer Platform-index |
| oif_count | Type: integer Number of OIFs |
| refcount | Type: integer OIF list Reference Count |
| oifname | Type: string OIF Interface name |
| oifindex | Type: hex OIF Interface ifIndex |
| oif_pkts | Type: longlong OIF packets |
| oif_bytes | Type: longlong OIF bytes |
Command Modes
- /exec
show forwarding otv
show forwarding otv intf [ peer peer-id ] [ module module ] [ __readonly__ vlan peer-id peer_vlan_count tunnel_ifindex tunnel_ifname ]
Syntax Description
| show | |
| forwarding | fib information |
| otv | overlay-transport-virtualization Not available in this release. |
| intf | Type: interface overlay interface |
| peer | overlay peer |
| peer-id | Type: integer overlay peer-id |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| vlan | Type: integer Vlan information |
| peer-id | Type: integer peer-id |
| peer_vlan_count | Type: integer peer vlan count |
| tunnel_ifindex | Type: hex tunnel ifindex |
| tunnel_ifname | Type: string tunnel if name |
Command Modes
- /exec
show forwarding otv ipv6 multicast route
show forwarding otv ipv6 multicast route [ vlan vlan_id ] [ module module ] [ __readonly__ [table_type] [vlan-id] [replicator] [num_routes] [num_starg_routes] [num_sg_routes] [num_gprefix_routes] [num_prefix_insert_fail] [num_groups] [num_sources] [ TABLE_otv_mroute [src_addr] [src_len] [grp_addr] [grp_len] [df_ordinal] [rpfif] [flag] [route_pkts] [route_bytes] [otv_route_pkts] [otv_route_bytes] [ TABLE_OIF oif_count [oiflist_id] [index] [refcount] [ TABLE_OIFLIST oifindex [oif_pkts] [oif_bytes] [src_addr] [src_len] [oifname] [vlanid] [grp_addr] [grp_len] [otv_src_addr] [otv_grp_addr] ] ] ] ]
Syntax Description
| show | show |
| forwarding | forwarding |
| otv | over-the-top virtualization Not available in this release. |
| ipv6 | ipv6 |
| multicast | Multicast IPv6 information |
| route | Mcast route information |
| vlan | vlan |
| vlan_id | Type: integer min: 1 max: 4095 vlan id |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| table_type | Type: string Table Type |
| vlan-id | Type: integer vlan id |
| replicator | Type: string replicator name |
| num_routes | Type: integer Number of routes |
| num_starg_routes | Type: integer Number of (*,G) routes |
| num_sg_routes | Type: integer Number of (S,G) routes |
| num_gprefix_routes | Type: integer Number of (*,G-prefix) routes |
| num_prefix_insert_fail | Type: integer Prefix insert fail count |
| num_groups | Type: integer Number of group entries in the table |
| num_sources | Type: integer Number of (S, G) entries for the group address |
| TABLE_otv_mroute | |
| src_addr | Type: string Ipv6 address string |
| src_len | Type: integer Source Address Mask |
| grp_addr | Type: string Ipv6 address string |
| grp_len | Type: integer Group address Mask |
| df_ordinal | Type: string DF ordinal |
| rpfif | Type: string RPF interface |
| flag | Type: string Route type flag |
| route_pkts | Type: longlong Route packet count |
| route_bytes | Type: longlong Route bytes |
| otv_route_pkts | Type: longlong OTV Route packet count |
| otv_route_bytes | Type: longlong OTV Route bytes |
| TABLE_OIF | |
| oif_count | Type: integer Number of OIFs |
| oiflist_id | Type: integer OIF list Identifier |
| index | Type: integer min: 1 max: 65535 outgoing interface list index |
| refcount | Type: integer reference count |
| TABLE_OIFLIST | |
| oifindex | Type: string OIF Interface ifIndex |
| oif_pkts | Type: longlong OIF packets |
| oif_bytes | Type: longlong OIF bytes |
| src_addr | Type: ipaddr Multicast IPv4 Source Address |
| src_len | Type: integer Source Address Mask |
| oifname | Type: string OIF Interface name |
| vlanid | Type: integer vlan id of the route |
| grp_addr | Type: ipaddr Multicast IPv4 Group Address |
| grp_len | Type: integer Group address Mask |
| otv_src_addr | Type: ipaddr Multicast IPv4 Source Address |
| otv_grp_addr | Type: ipaddr Multicast IPv4 Group Address |
Command Modes
- /exec
show forwarding otv multicast outgoing-interface-list
show forwarding otv multicast outgoing-interface-list [ __readonly__ TABLE_OIF index [refcount] [intf] [ TABLE_OIFLIST oifindex [src_addr] [src_len] [oifname] [vlanid] [grp_addr] [grp_len] ] ]
Syntax Description
| show | |
| forwarding | Forwarding information |
| otv | over-the-top virtualization Not available in this release. |
| multicast | Multicast IPv4 information |
| outgoing-interface-list | show outgoing interface list info |
| __readonly__ | |
| TABLE_OIF | outgoing interface list table |
| index | Type: integer min: 1 max: 65535 outgoing interface list index |
| refcount | Type: integer reference count |
| intf | Type: string interface name |
| TABLE_OIFLIST | outgoing interface list table |
| oifindex | Type: string OIF Interface ifIndex |
| src_addr | Type: ipaddr Multicast IPv4 Source Address |
| src_len | Type: integer Source Address Mask |
| oifname | Type: string OIF Interface name |
| vlanid | Type: integer vlan id of the route |
| grp_addr | Type: ipaddr Multicast IPv4 Group Address |
| grp_len | Type: integer Group address Mask |
Command Modes
- /exec
show forwarding otv multicast route
show forwarding otv multicast route [ [ vlan vlan-id ] | [ softwarebd software-bd ] ] [ module module ] [ __readonly__ replicator ]
Syntax Description
| show | show |
| forwarding | forwarding |
| otv | over-the-top virtualization Not available in this release. |
| multicast | Multicast IPv4 information |
| route | Mcast route information |
| vlan | vlan |
| vlan-id | Type: integer min: 1 max: 4095 vlan id |
| softwarebd | Software Bridge Domain |
| software-bd | Type: integer min: 1 max: 16383 Software bd |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| replicator | Type: string replicator name |
Command Modes
- /exec
show forwarding otv vlan
show forwarding otv vlan [vlan_id] [ module module ] [ __readonly__ vlan ]
Syntax Description
| show | show |
| forwarding | forwarding |
| otv | otv Not available in this release. |
| vlan | vlan |
| vlan_id | Type: integer min: 0 max: 4095 vlan id |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| vlan | Type: integer vlan |
Command Modes
- /exec
show forwarding pss route
show forwarding [ vrf { vrf-name | vrf-known-name } | table table_id ] [ ip | ipv4 ] pss route [ module module ]
Syntax Description
| show | show |
| forwarding | forwarding |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| table | display info per vpn-id |
| table_id | Type: integer table number |
| ip | ipv4 |
| ipv4 | ipv4 |
| pss | display info from pss |
| route | route |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding restart
show forwarding restart [ module module ]
Syntax Description
| show | |
| forwarding | fib information |
| restart | restart fib |
| module | slot |
| module | Type: integer slot number |
Command Modes
- /exec
show forwarding security group-tag
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table table_id | vlan vlan_id ] [ ip | ipv4 ] security group-tag [addr] [ module num | vrf { vrf-name | vrf-known-name | all } ] + [ __readonly__ header vrfname tid pfx-count ipa tag tv vid ]
Syntax Description
| show | |
| forwarding | display fib information |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| table | display info per vpn-id |
| table_id | Type: integer table number |
| vlan | vlan |
| vlan_id | Type: integer vlan number |
| ip | ipv4 |
| ipv4 | ipv4 |
| security | display IP security information |
| group-tag | ip_address->security_group_tag |
| addr | Type: ipaddr specific ip address |
| module | slot Available only in the 9500 series. |
| __readonly__ | |
| header | Type: string header string |
| vrfname | Type: string VRF name |
| tid | Type: integer table identifier |
| num | Type: integer-range module number |
| pfx-count | Type: integer total prefix count in VRF |
| ipa | Type: ipaddr ip address |
| tag | Type: integer min: 0 max: 65535 security group tag |
| tv | Type: integer min: 0 max: 1 sgt valid |
| vid | Type: integer vlan indentifier |
Command Modes
- /exec
show forwarding security mac
show forwarding [ vrf { vrf-name | vrf-known-name | all } | table table_id ] [ ip | ipv4 ] security mac [addr] [ module module | vrf { vrf-name | vrf-known-name | all } ] + [ __readonly__ header vrfname tid pfx-count ipa mac p m v intf ]
Syntax Description
| show | |
| forwarding | display fib information |
| vrf | display info per VRF |
| vrf-name | Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
| vrf-known-name | Type: vrf Known VRF name |
| all | Display information for all VRFs |
| table | display info per vpn-id |
| table_id | Type: integer table number |
| ip | ipv4 |
| ipv4 | ipv4 |
| security | display IP security information |
| mac | ip_address->mac_address |
| addr | Type: ipaddr specific ip address |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| header | Type: string header string |
| vrfname | Type: string VRF name |
| tid | Type: integer table identifier |
| pfx-count | Type: integer total prefix count in VRF |
| ipa | Type: ipaddr ip address |
| mac | Type: string mac address |
| p | Type: integer min: 0 max: 1 1 => ip->port binding |
| m | Type: integer min: 0 max: 1 1 => ip->mac binding |
| v | Type: integer min: 0 max: 1 1 => ip->vlan binding |
| intf | Type: interface ip->port interface |
Command Modes
- /exec
show forwarding trace
show forwarding trace [clear] [ module module ] [ __readonly__ op ]
Syntax Description
| show | |
| forwarding | display fib information |
| trace | display trace buffer Available only in the 9500 series. |
| clear | clear the trace buffer |
| module | slot |
| module | Type: integer slot number |
| __readonly__ | |
| op | Type: string output |
Command Modes
- /exec
show forwarding trace profile
show forwarding trace profile
Syntax Description
| show | |
| forwarding | display fib information |
| trace | display trace buffer |
| profile | show the collection profiling information |
Command Modes
- /exec
show forwarding trace profile funcstats
show forwarding trace profile funcstats [ enable | disable ] [ module module ] [ __readonly__ op ]
Syntax Description
| show | |
| forwarding | display fib information |
| trace | display trace buffer |
| profile | show the collection profiling information |
| funcstats | function statistics |
| enable | enable function statistics |
| disable | disable function statistics |
| module | slot Available only in the 9500 series. |
| module | Type: integer slot number |
| __readonly__ | |
| op | Type: string output |
Command Modes
- /exec
Feedback